experiments/clixon
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
clixon/doc/startup.md
Olof hagsand e8983a4be5 Upgrade repair test and docs
2019-03-19 10:04:16 +01:00

11 KiB
Raw Blame History

Startup of the Clixon backend

Background

This document describes the configuration startup mechanism of the Clixon backend. It describes the mechanism of Clixon version 3.10 which supports the following features:

  • Loading of a "startup" XML or JSON configuration
  • Loading of "extra" XML.
  • Detection of in-compatible XML and Yang models in the startup configuration.
  • An upgrade callback when in-compatible XML is encountered
  • A "failsafe" mode allowing a user to repair the startup on errors or failed validation.

Notes on this document:

  • "database" and "datastore" are used interchangeably for the same XML or JSON file storing a configuration.
  • For some scenarios, such a the "running" startup mode, a "temporary" datastore is used (called tmp_db). This file may have to be accessed out-of-band in failure scenarios.

Modes

When the Clixon backend starts, it can start in one of four modes:

  • startup: The configuration is loaded from a persistent startup datastore. The XML is loaded, parsed, validated and committed into the running database.
  • running: Similar to startup, but instead the running datastore is used as a persistent database. The system copies the original running-db to a temporary store(tmp_db), and commits that temporary datastore into the (new) running datastore.
  • none: No data stores are touched - the system starts and loads existing running datastore without validation or commits.
  • init: Similar to none, but the running database is cleared before loading

Startup targets usecases where running db may be in memory and a separate persistent storage (such as flash) is available. Running is for usecases when the running db is located in persistent. The none and init modes are mostly for debugging, or restart at crashes or updates.

Startup configuration

When the backend daemon is started in startup mode, the system loads the startup database.

The running mode is similar, the only difference is that the running database is copied into a temporary database which then acts as the startup store.

When loading the startup/tmp configuration, the following actions are performed by the system:

  • It is checked for parse errors,
  • the yang model-state is detected (if present)
  • the XML is validated against the Yang models loaded in the backend (NB: may be different from the model-state).

If yang-models do not match, an upgrade callback is made.

If any errors are detected, the backend enters a failsafe mode.

Model-state

Clixon has the ability to store Yang module-state information according to RFC7895 in the datastores. Including yang module-state in the datastores is enabled by the following entry in the Clixon configuration:

   <CLICON_XMLDB_MODSTATE>true</CLICON_XMLDB_MODSTATE>

If the datastore does not contain module-state info, no detection of incompatible XML is made, and the upgrade feature described in this section will not occur.

A backend does not perform detection of mismatching XML/Yang if:

  1. The datastore was saved in a pre-3.10 system
  2. CLICON_XMLDB_MODSTATE was not enabled when saving the file
  3. The backend configuration does not have CLICON_XMLDB_MODSTATE enabled.

Note that the module-state detection is independent of the other steps of the startup operation: syntax errors, validation checks, failsafe mode, etc, are still made, even though module-state detection does not occur.

Note also that a 3.10 Clixon system with CLICON_XMLDB_MODSTATE disabled will silently ignore the module state.

Example of a (simplified) datastore with Yang module-state:

<config>
   <a1 xmlns="urn:example:a">some text</a1>
   <modules-state xmlns="urn:ietf:params:xml:ns:yang:ietf-yang-library">
      <module-set-id>42</module-set-id>
      <module>
         <name>A</name>
         <revision>2019-01-01</revision>
         <namespace>urn:example:a</namespace>
      </module>
   </modules-state>
</config>

Upgrade callback

If the module-state of the startup configuration does not match the module-state of the backend daemon, an upgrade callback is made. This allows the user to automatically upgrade the XML to the recent version. As a hint, the module-state differences is passed to the callback.

Example upgrade callback:

  /*! Upgrade configuration from one version to another
   * @param[in]  h      Clicon handle
   * @param[in]  xms    Module state differences
   * @retval     0      OK
   * @retval    -1      Error
   */
  int 
  example_upgrade(clicon_handle       h,
                  cxobj              *xms)
  {
    if (xms)
	clicon_log_xml(LOG_NOTICE, xms, "%s", __FUNCTION__);
    // Perform upgrade of startup XML
    return 0;
  }

  static clixon_plugin_api api = {
    "example",                              /* name */    
    ...
    .ca_upgrade=example_upgrade,            /* upgrade configuration */
  };

Note that the example shown is only a template for an upgrade function. Actual upgrading code may be implemented by a user.

If no action is made by the upgrade calback, and thus the XML is not upgraded, the next step is XML/Yang validation.

An out-dated XML may still pass validation and the system will go up in normal state.

However, if the validation fails, the backend will try to enter the failsafe mode so that the user may perform manual upgarding of the configuration.

Extra XML

If the Yang validation succeeds and the startup configuration has been committed to the running database, a user may add "extra" XML.

There are two ways to add extra XML to running database after start. Note that this XML is "merged" into running, not "committed".

The first way is via a file. Assume you want to add this xml:

<config>
   <x xmlns="urn:example:clixon">extra</x>
</config>

You add this via the -c option:

clixon_backend ... -c extra.xml

The second way is by programming the plugin_reset() in the backend plugin. The example code contains an example on how to do this (see plugin_reset() in example_backend.c).

The extra-xml feature is not available if startup mode is none. It will also not occur in failsafe mode.

Startup status

When the startup process is completed, a startup status is set and is accessible via clixon_startup_status_get(h) with the following values:

  STARTUP_ERR        XML/JSON syntax error
  STARTUP_INVALID,   XML / Yang validation failure
  STARTUP_OK         OK

Failsafe mode

If the startup fails, the backend looks for a failsafe configuration in CLICON_XMLDB_DIR/failsafe_db. If such a config is not found, the backend terminates.

If the failsafe is found, the failsafe config is loaded and committed into the running db.

If the startup mode was startup, the startup database will contain syntax errors or invalidated XML.

If the startup mode was running, the the tmp database will contain syntax errors or invalidated XML.

Repair

If the system is in the failsafe mode (or fails to start), a user can repair a broken configuration and then restart the backend. This can be done out-of-band by editing the startup db and then restarting clixon.

In some circumstances, it is also possible to repair the startup configuration on-line without restarting the backend. This section shows how to repair a startup datastore on-line.

However, on-line repair cannot be made in the following circumstances:

  • The broken configuration contains syntactic errors - the system cannot parse the XML.
  • The startup mode is running. In this case, the broken config is in the tmp datastore that is not a recognized Netconf datastore, it has to be accessed out-of-band.
  • Netconf must be used. Restconf cannot separately access the different datastores.

First, copy the (broken) startup config to candidate. This is necessary since you cannot make edit-config calls to the startup db:

  <rpc>
    <copy-config>
      <source><startup/></source>
      <target><candidate/></target>
    </copy-config>
  </rpc>

You can now edit the XML in candidate. However, there are some restrictions on the edit commands. For example, you cannot access invalid XML (eg that does not have a corresponding module) via the edit-config operation. For example, assume x is obsolete syntax, then this is not accepted:

  <rpc>
    <edit-config>
      <target><candidate/></target>
      <config>
        <x xmlns="example" operation='delete'/>
      </config>
    </edit-config>
  </rpc>

Instead, assuming y is a valid syntax, this is allowed (x is not explicitly accessed):

  <rpc>
    <edit-config>
      <target><candidate/></target>
      <config operation='replace'>
        <y xmlns="example"/>
      </config>
    </edit-config>
  </rpc>

Finally, the candidate is validate and committed:

  <rpc>
    <commit/>
  </rpc>

This example is also used as a test script.

Flowcharts

This section contains "pseudo" flowcharts showing the dynamics of the configuration databases in the startup phase.

The flowchart starts in one of the modes (none, init, startup, running):

init mode

                 reset     
running   |--------+------------> GOTO EXTRA XML

running mode

running   ----+                   |----------+--------> GOTO EXTRA XML
               \ copy   parse  validate OK  / commit 
tmp       ------+-------+------+-----------+

startup mode

                              reset     
running                         |--------+------------> GOTO EXTRA XML
                parse validate OK       / commit 
startup -------+--+-------+------------+

Failure

failsafe      ----------------------+
                            reset    \ commit
running                       |-------+---------------> GOTO SYSTEM UP
              parse validate fail 
tmp/startup --+-----+---------------------------------> INVALID XML

Extra XML

running -----------------+----+------> GOTO SYSTEM UP
           reset  loadfile   / merge
tmp     |-------+-----+-----+

System UP

running ----+-----------------------> RUNNING
             \ copy
candidate     +---------------------> CANDIDATE

Invalid XML

               repair     restart

tmp/startup --------+---------+----------------------->

Thanks

Thanks matt smith and dave cornejo for input

References

RFC7895