experiments/clixon
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
clixon/apps/restconf/restconf_methods_post.c
Olof hagsand dc1ad560f9 * Bundle internal NETCONF on RESTCONF: A RESTCONF operation could produce several (up to four) internal NETCONF messages between RESTCONF server and backend. These have now been bundled into one. 
* NACM recovery user session is now properly enforced. This means that if `CLICON_NACM_CREDENTIALS` is `except` (default), then a specific `CLICON_NACM_RECOVERY_USER` can make any edits and bypass NACM rules.
* If a default value is replaced by an actual value, RESTCONF return values have changed from `204 No Content` to `201 Created`
* clixon-config.yang: Removed default valude of CLICON_NACM_RECOVERY_USER
2020-08-11 14:49:30 +02:00

969 lines
32 KiB
C
Raw Blame History

/*
*
***** BEGIN LICENSE BLOCK *****
Copyright (C) 2009-2019 Olof Hagsand
Copyright (C) 2020 Olof Hagsand and Rubicon Communications, LLC(Netgate)
This file is part of CLIXON.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Alternatively, the contents of this file may be used under the terms of
the GNU General Public License Version 3 or later (the "GPL"),
in which case the provisions of the GPL are applicable instead
of those above. If you wish to allow use of your version of this file only
under the terms of the GPL, and not to allow others to
use your version of this file under the terms of Apache License version 2,
indicate your decision by deleting the provisions above and replace them with
the notice and other provisions required by the GPL. If you do not delete
the provisions above, a recipient may use your version of this file under
the terms of any one of the Apache License version 2 or the GPL.
***** END LICENSE BLOCK *****
* Restconf method implementation for post: operation(rpc) and data
* From RFC 8040 Section 4.4. POST
*/
#ifdef HAVE_CONFIG_H
#include "clixon_config.h" /* generated by config & autoconf */
#endif
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <errno.h>
#include <signal.h>
#include <syslog.h>
#include <fcntl.h>
#include <time.h>
#include <signal.h>
#include <limits.h>
#include <sys/time.h>
#include <sys/wait.h>
/* cligen */
#include <cligen/cligen.h>
/* clicon */
#include <clixon/clixon.h>
#include "restconf_lib.h"
#include "restconf_handle.h"
#include "restconf_api.h"
#include "restconf_err.h"
#include "restconf_methods_post.h"
/*! Print location header from
* @param[in] req Generic Www handle
* @param[in] xobj If set (eg POST) add to api-path
* $https “on” if connection operates in SSL mode, or an empty string otherwise
* @note ports are ignored
*/
static int
http_location_header(clicon_handle h,
void *req,
cxobj *xobj)
{
int retval = -1;
char *https;
char *host;
char *request_uri;
cbuf *cb = NULL;
https = restconf_param_get(h, "HTTPS");
host = restconf_param_get(h, "HTTP_HOST");
request_uri = restconf_param_get(h, "REQUEST_URI");
if (xobj != NULL){
if ((cb = cbuf_new()) == NULL){
clicon_err(OE_UNIX, 0, "cbuf_new");
goto done;
}
if (xml2api_path_1(xobj, cb) < 0)
goto done;
if (restconf_reply_header(req, "Location", "http%s://%s%s%s",
https?"s":"",
host,
request_uri,
cbuf_get(cb)) < 0)
goto done;
}
else
if (restconf_reply_header(req, "Location", "http%s://%s%s",
https?"s":"",
host,
request_uri) < 0)
goto done;
retval = 0;
done:
if (cb)
cbuf_free(cb);
return retval;
}
/*! Generic REST POST method
* @param[in] h Clixon handle
* @param[in] req Generic Www handle
* @param[in] api_path According to restconf (Sec 3.5.3.1 in rfc8040)
* @param[in] pcvec Vector of path ie DOCUMENT_URI element
* @param[in] pi Offset, where to start pcvec
* @param[in] qvec Vector of query string (QUERY_STRING)
* @param[in] data Stream input data
* @param[in] pretty Set to 1 for pretty-printed xml/json output
* @param[in] media_out Output media
* restconf POST is mapped to edit-config create.
* @see RFC8040 Sec 4.4.1
POST:
target resource type is datastore --> create a top-level resource
target resource type is data resource --> create child resource
The message-body MUST contain exactly one instance of the
expected data resource. The data model for the child tree is the
subtree, as defined by YANG for the child resource.
If the POST method succeeds, a "201 Created" status-line is returned
and there is no response message-body. A "Location" header
identifying the child resource that was created MUST be present in
the response in this case.
If the data resource already exists, then the POST request MUST fail
and a "409 Conflict" status-line MUST be returned.
* @see RFC8040 Section 4.4
* @see api_data_put
*/
int
api_data_post(clicon_handle h,
void *req,
char *api_path,
int pi,
cvec *qvec,
char *data,
int pretty,
restconf_media media_out)
{
int retval = -1;
enum operation_type op = OP_CREATE;
cxobj *xdata = NULL; /* The actual data object to modify */
int i;
cbuf *cbx = NULL;
cxobj *xtop = NULL; /* top of api-path */
cxobj *xbot = NULL; /* bottom of api-path */
yang_stmt *ybot = NULL; /* yang of xbot */
yang_stmt *ymoddata = NULL; /* yang module of data (-d) */
yang_stmt *yspec;
yang_stmt *ydata;
cxobj *xa;
cxobj *xret = NULL;
cxobj *xretcom = NULL; /* return from commit */
cxobj *xretdis = NULL; /* return from discard-changes */
cxobj *xerr = NULL; /* malloced must be freed */
cxobj *xe; /* dont free */
cxobj *x;
char *username;
int ret;
restconf_media media_in;
int nrchildren0 = 0;
yang_bind yb;
clicon_debug(1, "%s api_path:\"%s\"", __FUNCTION__, api_path);
clicon_debug(1, "%s data:\"%s\"", __FUNCTION__, data);
if ((yspec = clicon_dbspec_yang(h)) == NULL){
clicon_err(OE_FATAL, 0, "No DB_SPEC");
goto done;
}
for (i=0; i<pi; i++)
api_path = index(api_path+1, '/');
/* Create config top-of-tree */
if ((xtop = xml_new("config", NULL, CX_ELMNT)) == NULL)
goto done;
/* Translate api_path to xtop/xbot */
xbot = xtop;
if (api_path){
/* Translate api-path to xml, side-effect: validate the api-path, note: strict=1 */
if ((ret = api_path2xml(api_path, yspec, xtop, YC_DATANODE, 1, &xbot, &ybot, &xerr)) < 0)
goto done;
if (ret == 0){ /* validation failed */
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
}
/* 4.4.1: The message-body MUST contain exactly one instance of the
* expected data resource. (tested again below)
*/
if (data == NULL || strlen(data) == 0){
if (netconf_malformed_message_xml(&xerr, "The message-body MUST contain exactly one instance of the expected data resource") < 0)
goto done;
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
/* Record how many children before parse (after check nr should be +1) */
nrchildren0 = 0;
x = NULL;
while ((x = xml_child_each(xbot, x, CX_ELMNT)) != NULL){
nrchildren0++;
xml_flag_set(x, XML_FLAG_MARK);
}
if (xml_spec(xbot)==NULL)
yb = YB_MODULE;
else
yb = YB_PARENT;
/* Parse input data as json or xml into xml
* If xbot is top-level (api_path=null) it does not have a spec therefore look for
* top-level (yspec) otherwise assume parent (xbot) is populated.
*/
media_in = restconf_content_type(h);
switch (media_in){
case YANG_DATA_XML:
if ((ret = clixon_xml_parse_string(data, yb, yspec, &xbot, &xerr)) < 0){
if (netconf_malformed_message_xml(&xerr, clicon_err_reason) < 0)
goto done;
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
if (ret == 0){
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
break;
case YANG_DATA_JSON:
if ((ret = clixon_json_parse_string(data, yb, yspec, &xbot, &xerr)) < 0){
if (netconf_malformed_message_xml(&xerr, clicon_err_reason) < 0)
goto done;
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
if (ret == 0){
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
break;
default:
restconf_unsupported_media(req);
goto ok;
break;
} /* switch media_in */
/* RFC 8040 4.4.1: The message-body MUST contain exactly one instance of the
* expected data resource.
*/
clicon_debug(1, "%s nrchildren0: %d", __FUNCTION__, nrchildren0);
if (xml_child_nr_type(xbot, CX_ELMNT) - nrchildren0 != 1){
if (netconf_malformed_message_xml(&xerr, "The message-body MUST contain exactly one instance of the expected data resource") < 0)
goto done;
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
/* Find the actual (new) object, the single unmarked one */
x = NULL;
while ((x = xml_child_each(xbot, x, CX_ELMNT)) != NULL){
if (xml_flag(x, XML_FLAG_MARK)){
xml_flag_reset(x, XML_FLAG_MARK);
continue;
}
xdata = x;
}
/* Add operation (create/replace) as attribute */
if ((xa = xml_new("operation", xdata, CX_ATTR)) == NULL)
goto done;
if (xml_value_set(xa, xml_operation2str(op)) < 0)
goto done;
if (xml_namespace_change(xa, NETCONF_BASE_NAMESPACE, NETCONF_BASE_PREFIX) < 0)
goto done;
if (ys_module_by_xml(yspec, xdata, &ymoddata) < 0)
goto done;
/* ybot is parent of spec(parent(data))) */
if (ymoddata && (ydata = xml_spec(xdata)) != NULL){
if (ys_real_module(ydata) != ymoddata){
if (netconf_malformed_message_xml(&xerr, "Data is not prefixed with matching namespace") < 0)
goto done;
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
/* If URI points out an object, then data's parent should be that object
*/
if (ybot && yang_parent_get(ydata) != ybot){
if (netconf_malformed_message_xml(&xerr, "Data is not prefixed with matching namespace") < 0)
goto done;
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
}
/* If restconf insert/point attributes are present, translate to netconf */
if (restconf_insert_attributes(xdata, qvec) < 0)
goto done;
#if 1
if (clicon_debug_get())
clicon_log_xml(LOG_DEBUG, xdata, "%s xdata:", __FUNCTION__);
#endif
/* Create text buffer for transfer to backend */
if ((cbx = cbuf_new()) == NULL){
clicon_err(OE_UNIX, 0, "cbuf_new");
goto done;
}
/* For internal XML protocol: add username attribute for access control
*/
username = clicon_username_get(h);
cprintf(cbx, "<rpc username=\"%s\" xmlns:%s=\"%s\">",
username?username:"",
NETCONF_BASE_PREFIX,
NETCONF_BASE_NAMESPACE); /* bind nc to netconf namespace */
cprintf(cbx, "<edit-config");
/* RFC8040 Sec 1.4:
* If the NETCONF server supports :startup, the RESTCONF server MUST
* automatically update the non-volatile startup configuration
* datastore, after the "running" datastore has been altered as a
* consequence of a RESTCONF edit operation.
*/
if (if_feature(yspec, "ietf-netconf", "startup"))
cprintf(cbx, " copystartup=\"true\"");
cprintf(cbx, " autocommit=\"true\"");
cprintf(cbx, "><target><candidate /></target>");
cprintf(cbx, "<default-operation>none</default-operation>");
if (clicon_xml2cbuf(cbx, xtop, 0, 0, -1) < 0)
goto done;
cprintf(cbx, "</edit-config></rpc>");
clicon_debug(1, "%s xml: %s api_path:%s",__FUNCTION__, cbuf_get(cbx), api_path);
if (clicon_rpc_netconf(h, cbuf_get(cbx), &xret, NULL) < 0)
goto done;
if ((xe = xpath_first(xret, NULL, "//rpc-error")) != NULL){
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
if (http_location_header(h, req, xdata) < 0)
goto done;
if (restconf_reply_send(req, 201, NULL) < 0)
goto done;
ok:
retval = 0;
done:
clicon_debug(1, "%s retval:%d", __FUNCTION__, retval);
if (xret)
xml_free(xret);
if (xerr)
xml_free(xerr);
if (xretcom)
xml_free(xretcom);
if (xretdis)
xml_free(xretdis);
if (xtop)
xml_free(xtop);
if (cbx)
cbuf_free(cbx);
return retval;
} /* api_data_post */
/*! Handle input data to api_operations_post
* @param[in] h Clixon handle
* @param[in] req Generic Www handle
* @param[in] data Stream input data
* @param[in] yspec Yang top-level specification
* @param[in] yrpc Yang rpc spec
* @param[in] xrpc XML pointer to rpc method
* @param[in] pretty Set to 1 for pretty-printed xml/json output
* @param[in] media_out Output media
* @retval 1 OK
* @retval 0 Fail, Error message sent
* @retval -1 Fatal error, clicon_err called
*
* RFC8040 3.6.1
* If the "rpc" or "action" statement has an "input" section, then
* instances of these input parameters are encoded in the module
* namespace where the "rpc" or "action" statement is defined, in an XML
* element or JSON object named "input", which is in the module
* namespace where the "rpc" or "action" statement is defined.
* (Any other input is assumed as error.)
*/
static int
api_operations_post_input(clicon_handle h,
void *req,
char *data,
yang_stmt *yspec,
yang_stmt *yrpc,
cxobj *xrpc,
int pretty,
restconf_media media_out)
{
int retval = -1;
cxobj *xdata = NULL;
cxobj *xerr = NULL; /* malloced must be freed */
cxobj *xe;
cxobj *xinput;
cxobj *x;
cbuf *cbret = NULL;
int ret;
restconf_media media_in;
clicon_debug(1, "%s %s", __FUNCTION__, data);
if ((cbret = cbuf_new()) == NULL){
clicon_err(OE_UNIX, 0, "cbuf_new");
goto done;
}
/* Parse input data as json or xml into xml */
media_in = restconf_content_type(h);
switch (media_in){
case YANG_DATA_XML:
/* XXX: Here data is on the form: <input xmlns="urn:example:clixon"/> and has no proper yang binding
* support */
if ((ret = clixon_xml_parse_string(data, YB_NONE, yspec, &xdata, &xerr)) < 0){
if (netconf_malformed_message_xml(&xerr, clicon_err_reason) < 0)
goto done;
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto fail;
}
if (ret == 0){
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto fail;
}
break;
case YANG_DATA_JSON:
/* XXX: Here data is on the form: {"clixon-example:input":null} and has no proper yang binding
* support */
if ((ret = clixon_json_parse_string(data, YB_NONE, yspec, &xdata, &xerr)) < 0){
if (netconf_malformed_message_xml(&xerr, clicon_err_reason) < 0)
goto done;
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto fail;
}
if (ret == 0){
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto fail;
}
break;
default:
restconf_unsupported_media(req);
goto fail;
break;
} /* switch media_in */
xml_name_set(xdata, "data");
/* Here xdata is:
* <data><input xmlns="urn:example:clixon">...</input></data>
*/
#if 1
if (clicon_debug_get())
clicon_log_xml(LOG_DEBUG, xdata, "%s xdata:", __FUNCTION__);
#endif
/* Validate that exactly only <input> tag */
if ((xinput = xml_child_i_type(xdata, 0, CX_ELMNT)) == NULL ||
strcmp(xml_name(xinput),"input") != 0 ||
xml_child_nr_type(xdata, CX_ELMNT) != 1){
if (xml_child_nr_type(xdata, CX_ELMNT) == 0){
if (netconf_malformed_message_xml(&xerr, "restconf RPC does not have input statement") < 0)
goto done;
}
else
if (netconf_malformed_message_xml(&xerr, "restconf RPC has malformed input statement (multiple or not called input)") < 0)
goto done;
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto fail;
}
// clicon_debug(1, "%s input validation passed", __FUNCTION__);
/* Add all input under <rpc>path */
x = NULL;
while ((x = xml_child_i_type(xinput, 0, CX_ELMNT)) != NULL)
if (xml_addsub(xrpc, x) < 0)
goto done;
/* Here xrpc is: <myfn xmlns="uri"><x>42</x></myfn>
*/
// ok:
retval = 1;
done:
clicon_debug(1, "%s retval: %d", __FUNCTION__, retval);
if (cbret)
cbuf_free(cbret);
if (xerr)
xml_free(xerr);
if (xdata)
xml_free(xdata);
return retval;
fail:
retval = 0;
goto done;
}
/*! Handle output data to api_operations_post
* @param[in] h Clixon handle
* @param[in] req Generic Www handle
* @param[in] xret XML reply messages from backend/handler
* @param[in] yspec Yang top-level specification
* @param[in] youtput Yang rpc output specification
* @param[in] pretty Set to 1 for pretty-printed xml/json output
* @param[in] media_out Output media
* @param[out] xoutputp Restconf JSON/XML output
* @retval 1 OK
* @retval 0 Fail, Error message sent
* @retval -1 Fatal error, clicon_err called
* xret should like: <top><rpc-reply><x xmlns="uri">0</x></rpc-reply></top>
*/
static int
api_operations_post_output(clicon_handle h,
void *req,
cxobj *xret,
yang_stmt *yspec,
yang_stmt *youtput,
char *namespace,
int pretty,
restconf_media media_out,
cxobj **xoutputp)
{
int retval = -1;
cxobj *xoutput = NULL;
cxobj *xerr = NULL; /* assumed malloced, will be freed */
cxobj *xe; /* just pointer */
cxobj *xa; /* xml attribute (xmlns) */
cxobj *x;
cxobj *xok;
int isempty;
// clicon_debug(1, "%s", __FUNCTION__);
/* Validate that exactly only <rpc-reply> tag */
if ((xoutput = xml_child_i_type(xret, 0, CX_ELMNT)) == NULL ||
strcmp(xml_name(xoutput),"rpc-reply") != 0 ||
xml_child_nr_type(xret, CX_ELMNT) != 1){
if (netconf_malformed_message_xml(&xerr, "restconf RPC does not have single input") < 0)
goto done;
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto fail;
}
/* xoutput should now look: <rpc-reply><x xmlns="uri">0</x></rpc-reply> */
/* 9. Translate to restconf RPC data */
xml_name_set(xoutput, "output");
/* xoutput should now look: <output><x xmlns="uri">0</x></output> */
#if 1
if (clicon_debug_get())
clicon_log_xml(LOG_DEBUG, xoutput, "%s xoutput:", __FUNCTION__);
#endif
/* Sanity check of outgoing XML
* For now, skip outgoing checks.
* (1) Does not handle <ok/> properly
* (2) Uncertain how validation errors should be logged/handled
*/
if (youtput != NULL){
xml_spec_set(xoutput, youtput); /* needed for xml_bind_yang */
#ifdef notyet
if ((ret = xml_bind_yang(xoutput, YB_MODULE, yspec, &xerr)) < 0)
goto done;
if (ret > 0 && (ret = xml_yang_validate_all(xoutput, &xerr)) < 0)
goto done;
if (ret == 1 &&
(ret = xml_yang_validate_add(h, xoutput, &xerr)) < 0)
goto done;
if (ret == 0){ /* validation failed */
if ((xe = xpath_first(xerr, NULL, "rpc-reply/rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto fail;
}
#endif
}
/* Special case, no yang output (single <ok/> - or empty body?)
* RFC 7950 7.14.4
* If the RPC operation invocation succeeded and no output parameters
* are returned, the <rpc-reply> contains a single <ok/> element
* RFC 8040 3.6.2
* If the "rpc" statement has no "output" section, the response message
* MUST NOT include a message-body and MUST send a "204 No Content"
* status-line instead.
*/
isempty = xml_child_nr_type(xoutput, CX_ELMNT) == 0 ||
(xml_child_nr_type(xoutput, CX_ELMNT) == 1 &&
(xok = xml_child_i_type(xoutput, 0, CX_ELMNT)) != NULL &&
strcmp(xml_name(xok),"ok")==0);
if (isempty) {
/* Internal error - invalid output from rpc handler */
if (restconf_reply_send(req, 204, NULL) < 0)
goto done;
goto fail;
}
/* Clear namespace of parameters */
x = NULL;
while ((x = xml_child_each(xoutput, x, CX_ELMNT)) != NULL) {
if ((xa = xml_find_type(x, NULL, "xmlns", CX_ATTR)) != NULL)
if (xml_purge(xa) < 0)
goto done;
}
/* Set namespace on output */
if (xmlns_set(xoutput, NULL, namespace) < 0)
goto done;
*xoutputp = xoutput;
retval = 1;
done:
clicon_debug(1, "%s retval: %d", __FUNCTION__, retval);
if (xerr)
xml_free(xerr);
return retval;
fail:
retval = 0;
goto done;
}
/*! REST operation POST method
* @param[in] h Clixon handle
* @param[in] req Generic Www handle
* @param[in] api_path According to restconf (Sec 3.5.3.1 in rfc8040)
* @param[in] qvec Vector of query string (QUERY_STRING)
* @param[in] data Stream input data
* @param[in] pretty Set to 1 for pretty-printed xml/json output
* @param[in] media_out Output media
* See RFC 8040 Sec 3.6 / 4.4.2
* @note We map post to edit-config create.
* POST {+restconf}/operations/<operation>
* 1. Initialize
* 2. Get rpc module and name from uri (oppath) and find yang spec
* 3. Build xml tree with user and rpc: <rpc username="foo"><myfn xmlns="uri"/>
* 4. Parse input data (arguments):
* JSON: {"example:input":{"x":0}}
* XML: <input xmlns="uri"><x>0</x></input>
* 5. Translate input args to Netconf RPC, add to xml tree:
* <rpc username="foo"><myfn xmlns="uri"><x>42</x></myfn></rpc>
* 6. Validate outgoing RPC and fill in default values
* <rpc username="foo"><myfn xmlns="uri"><x>42</x><y>99</y></myfn></rpc>
* 7. Send to RPC handler, either local or backend
* 8. Receive reply from local/backend handler as Netconf RPC
* <rpc-reply><x xmlns="uri">0</x></rpc-reply>
* 9. Translate to restconf RPC data:
* JSON: {"example:output":{"x":0}}
* XML: <output xmlns="uri"><x>0</x></input>
* 10. Validate and send reply to originator
*/
int
api_operations_post(clicon_handle h,
void *req,
char *api_path,
int pi,
cvec *qvec,
char *data,
int pretty,
restconf_media media_out)
{
int retval = -1;
int i;
char *oppath = api_path;
yang_stmt *yspec;
yang_stmt *youtput = NULL;
yang_stmt *yrpc = NULL;
cxobj *xret = NULL;
cxobj *xerr = NULL; /* malloced must be freed */
cxobj *xtop = NULL; /* xpath root */
cxobj *xbot = NULL;
yang_stmt *y = NULL;
cxobj *xoutput = NULL;
cxobj *xa;
cxobj *xe;
char *username;
cbuf *cbret = NULL;
int ret = 0;
char *prefix = NULL;
char *id = NULL;
yang_stmt *ys = NULL;
char *namespace = NULL;
clicon_debug(1, "%s json:\"%s\" path:\"%s\"", __FUNCTION__, data, api_path);
/* 1. Initialize */
if ((yspec = clicon_dbspec_yang(h)) == NULL){
clicon_err(OE_FATAL, 0, "No DB_SPEC");
goto done;
}
if ((cbret = cbuf_new()) == NULL){
clicon_err(OE_UNIX, 0, "cbuf_new");
goto done;
}
for (i=0; i<pi; i++)
oppath = index(oppath+1, '/');
if (oppath == NULL || strcmp(oppath,"/")==0){
if (netconf_operation_failed_xml(&xerr, "protocol", "Operation name expected") < 0)
goto done;
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
/* 2. Get rpc module and name from uri (oppath) and find yang spec
* POST {+restconf}/operations/<operation>
*
* The <operation> field identifies the module name and rpc identifier
* string for the desired operation.
*/
if (nodeid_split(oppath+1, &prefix, &id) < 0) /* +1 skip / */
goto done;
if ((ys = yang_find(yspec, Y_MODULE, prefix)) == NULL){
if (netconf_operation_failed_xml(&xerr, "protocol", "yang module not found") < 0)
goto done;
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
if ((yrpc = yang_find(ys, Y_RPC, id)) == NULL){
if (netconf_missing_element_xml(&xerr, "application", id, "RPC not defined") < 0)
goto done;
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
/* 3. Build xml tree with user and rpc:
* <rpc username="foo"><myfn xmlns="uri"/>
*/
if ((xtop = xml_new("rpc", NULL, CX_ELMNT)) == NULL)
goto done;
xbot = xtop;
/* Here xtop is: <rpc/> */
if ((username = clicon_username_get(h)) != NULL){
if ((xa = xml_new("username", xtop, CX_ATTR)) == NULL)
goto done;
if (xml_value_set(xa, username) < 0)
goto done;
/* Here xtop is: <rpc username="foo"/> */
}
if ((ret = api_path2xml(oppath, yspec, xtop, YC_SCHEMANODE, 1, &xbot, &y, &xerr)) < 0)
goto done;
if (ret == 0){ /* validation failed */
if ((xe = xpath_first(xerr, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
/* Here xtop is: <rpc username="foo"><myfn xmlns="uri"/></rpc>
* xbot is <myfn xmlns="uri"/>
* 4. Parse input data (arguments):
* JSON: {"example:input":{"x":0}}
* XML: <input xmlns="uri"><x>0</x></input>
*/
namespace = xml_find_type_value(xbot, NULL, "xmlns", CX_ATTR);
clicon_debug(1, "%s : 4. Parse input data: %s", __FUNCTION__, data);
if (data && strlen(data)){
if ((ret = api_operations_post_input(h, req, data, yspec, yrpc, xbot,
pretty, media_out)) < 0)
goto done;
if (ret == 0)
goto ok;
}
/* Here xtop is:
<rpc username="foo"><myfn xmlns="uri"><x>42</x></myfn></rpc> */
#if 1
if (clicon_debug_get())
clicon_log_xml(LOG_DEBUG, xtop, "%s 5. Translate input args:", __FUNCTION__);
#endif
/* 6. Validate outgoing RPC and fill in defaults */
if ((ret = xml_bind_yang_rpc(xtop, yspec, &xret)) < 0) /* */
goto done;
if (ret == 0){
if ((xe = xpath_first(xret, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto ok;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
if ((ret = xml_yang_validate_rpc(h, xtop, &xret)) < 0)
goto done;
if (ret == 0){
if ((xe = xpath_first(xret, NULL, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto ok;
}
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
/* Here xtop is (default values):
* <rpc username="foo"><myfn xmlns="uri"><x>42</x><y>99</y></myfn></rpc>
*/
#if 0
if (clicon_debug_get())
clicon_log_xml(LOG_DEBUG, xtop, "%s 6. Validate and defaults:", __FUNCTION__);
#endif
/* 7. Send to RPC handler, either local or backend
* Note (1) xtop is <rpc><method> xbot is <method>
* (2) local handler wants <method> and backend wants <rpc><method>
*/
/* Look for local (client-side) restconf plugins.
* -1:Error, 0:OK local, 1:OK backend
*/
if ((ret = rpc_callback_call(h, xbot, cbret, req)) < 0)
goto done;
if (ret > 0){ /* Handled locally */
if (clixon_xml_parse_string(cbuf_get(cbret), YB_NONE, NULL, &xret, NULL) < 0)
goto done;
/* Local error: return it and quit */
if ((xe = xpath_first(xret, NULL, "rpc-reply/rpc-error")) != NULL){
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
}
else { /* Send to backend */
if (clicon_rpc_netconf_xml(h, xtop, &xret, NULL) < 0)
goto done;
if ((xe = xpath_first(xret, NULL, "rpc-reply/rpc-error")) != NULL){
if (api_return_err(h, req, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
}
/* 8. Receive reply from local/backend handler as Netconf RPC
* <rpc-reply><x xmlns="uri">0</x></rpc-reply>
*/
#if 1
if (clicon_debug_get())
clicon_log_xml(LOG_DEBUG, xret, "%s Receive reply:", __FUNCTION__);
#endif
youtput = yang_find(yrpc, Y_OUTPUT, NULL);
if ((ret = api_operations_post_output(h, req, xret, yspec, youtput, namespace,
pretty, media_out, &xoutput)) < 0)
goto done;
if (ret == 0)
goto ok;
/* xoutput should now look: <output xmlns="uri"><x>0</x></output> */
if (restconf_reply_header(req, "Content-Type", "%s", restconf_media_int2str(media_out)) < 0)
goto done;
cbuf_reset(cbret);
switch (media_out){
case YANG_DATA_XML:
if (clicon_xml2cbuf(cbret, xoutput, 0, pretty, -1) < 0)
goto done;
/* xoutput should now look: <output xmlns="uri"><x>0</x></output> */
break;
case YANG_DATA_JSON:
if (xml2json_cbuf(cbret, xoutput, pretty) < 0)
goto done;
/* xoutput should now look: {"example:output": {"x":0,"y":42}} */
break;
default:
break;
}
if (restconf_reply_send(req, 200, cbret) < 0)
goto done;
ok:
retval = 0;
done:
clicon_debug(1, "%s retval:%d", __FUNCTION__, retval);
if (prefix)
free(prefix);
if (id)
free(id);
if (xtop)
xml_free(xtop);
if (xret)
xml_free(xret);
if (xerr)
xml_free(xerr);
if (cbret)
cbuf_free(cbret);
return retval;
}
Reference in a new issue View git blame Copy permalink