experiments/clixon
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
clixon/apps/cli/cli_common.c
Olof hagsand cfe1f2936e stronger defaults test
2021-11-16 15:29:00 +01:00

1408 lines
37 KiB
C
Raw Blame History

/*
*
***** BEGIN LICENSE BLOCK *****
Copyright (C) 2009-2016 Olof Hagsand and Benny Holmgren
Copyright (C) 2017-2019 Olof Hagsand
Copyright (C) 2020-2021 Olof Hagsand and Rubicon Communications, LLC(Netgate)
This file is part of CLIXON.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Alternatively, the contents of this file may be used under the terms of
the GNU General Public License Version 3 or later (the "GPL"),
in which case the provisions of the GPL are applicable instead
of those above. If you wish to allow use of your version of this file only
under the terms of the GPL, and not to allow others to
use your version of this file under the terms of Apache License version 2,
indicate your decision by deleting the provisions above and replace them with
the notice and other provisions required by the GPL. If you do not delete
the provisions above, a recipient may use your version of this file under
the terms of any one of the Apache License version 2 or the GPL.
***** END LICENSE BLOCK *****
*
*/
#ifdef HAVE_CONFIG_H
#include "clixon_config.h" /* generated by config & autoconf */
#endif
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <signal.h>
#include <errno.h>
#include <stdarg.h>
#include <time.h>
#include <ctype.h>
#include <unistd.h>
#include <dirent.h>
#include <syslog.h>
#include <arpa/inet.h>
#include <netinet/in.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/wait.h>
#include <sys/param.h>
#include <sys/mount.h>
#include <pwd.h>
/* cligen */
#include <cligen/cligen.h>
/* clicon */
#include <clixon/clixon.h>
#include "clixon_cli_api.h"
#include "cli_common.h"
/*! Register log notification stream
* @param[in] h Clicon handle
* @param[in] stream Event stream. CLICON is predefined, others are application-defined
* @param[in] filter Filter. For xml notification ie xpath: .[name="kalle"]
* @param[in] status 0 for stop, 1 to start
* @param[in] fn Callback function called when notification occurs
* @param[in] arg Argument to function note
* Note this calls cligen_regfd which may callback on cli command interpretator
*/
int
cli_notification_register(clicon_handle h,
char *stream,
enum format_enum format,
char *filter,
int status,
int (*fn)(int, void*),
void *arg)
{
int retval = -1;
char *logname = NULL;
void *p;
int s;
clicon_hash_t *cdat = clicon_data(h);
size_t len;
int s_exist = -1;
len = strlen("log_socket_") + strlen(stream) + 1;
if ((logname = malloc(len)) == NULL){
clicon_err(OE_UNIX, errno, "malloc");
goto done;
}
snprintf(logname, len, "log_socket_%s", stream);
if ((p = clicon_hash_value(cdat, logname, &len)) != NULL)
s_exist = *(int*)p;
if (status){ /* start */
if (s_exist!=-1){
clicon_err(OE_PLUGIN, 0, "Result log socket already exists");
goto done;
}
if (clicon_rpc_create_subscription(h, stream, filter, &s) < 0)
goto done;
if (cligen_regfd(s, fn, arg) < 0)
goto done;
if (clicon_hash_add(cdat, logname, &s, sizeof(s)) == NULL)
goto done;
}
else{ /* stop */
if (s_exist != -1){
cligen_unregfd(s_exist);
}
clicon_hash_del(cdat, logname);
#if 0 /* cant turn off */
if (clicon_rpc_create_subscription(h, status, stream, format, filter, NULL) < 0)
goto done;
#endif
}
retval = 0;
done:
if (logname)
free(logname);
return retval;
}
/* Signal functions, not exported to API */
void
cli_signal_block(clicon_handle h)
{
clicon_signal_block (SIGTSTP);
clicon_signal_block (SIGQUIT);
clicon_signal_block (SIGCHLD);
if (!clicon_quiet_mode(h))
clicon_signal_block (SIGINT);
}
void
cli_signal_unblock(clicon_handle h)
{
clicon_signal_unblock (SIGTSTP);
clicon_signal_unblock (SIGQUIT);
clicon_signal_unblock (SIGCHLD);
clicon_signal_unblock (SIGINT);
}
/*
* Flush pending signals for a given signal type
*/
void
cli_signal_flush(clicon_handle h)
{
/* XXX A bit rough. Use sigpending() and more clever logic ?? */
sigfn_t h1, h2, h3, h4;
set_signal(SIGTSTP, SIG_IGN, &h1);
set_signal(SIGQUIT, SIG_IGN, &h2);
set_signal(SIGCHLD, SIG_IGN, &h3);
set_signal(SIGINT, SIG_IGN, &h4);
cli_signal_unblock (h);
set_signal(SIGTSTP, h1, NULL);
set_signal(SIGQUIT, h2, NULL);
set_signal(SIGCHLD, h3, NULL);
set_signal(SIGINT, h4, NULL);
cli_signal_block (h);
}
/*! Create body and add last CLI variable vector as value
* Create and add an XML body as child of XML node xbot. Set its value to the last
* CLI variable vector element.
*/
static int
dbxml_body(cxobj *xbot,
cvec *cvv)
{
int retval = -1;
char *str = NULL;
cxobj *xb;
cg_var *cval;
int len;
len = cvec_len(cvv);
cval = cvec_i(cvv, len-1);
if ((str = cv2str_dup(cval)) == NULL){
clicon_err(OE_UNIX, errno, "cv2str_dup");
goto done;
}
if ((xb = xml_new("body", xbot, CX_BODY)) == NULL)
goto done;
if (xml_value_set(xb, str) < 0)
goto done;
retval = 0;
done:
if (str)
free(str);
return retval;
}
/*! Modify xml datastore from a callback using xml key format strings
* @param[in] h Clicon handle
* @param[in] cvv Vector of cli string and instantiated variables
* @param[in] argv Vector. First element xml key format string, eg "/aaa/%s"
* @param[in] op Operation to perform on database
* @param[in] nsctx Namespace context for last value added
* Cvv will contain first the complete cli string, and then a set of optional
* instantiated variables.
* If the last node is a leaf, the last cvv element is added as a value. This value
* Example:
* cvv[0] = "set interfaces interface eth0 type bgp"
* cvv[1] = "eth0"
* cvv[2] = "bgp"
* argv[0] = "/interfaces/interface/%s/type"
* op: OP_MERGE
* @see cli_callback_generate where arg is generated
* @note The last value may require namespace binding present in nsctx. Note that the nsctx
* cannot normally be supplied by the clispec functions, such as cli_set, but need to be
* generated by afunction such as clixon_instance_id_bind() or other programmatically.
*/
int
cli_dbxml(clicon_handle h,
cvec *cvv,
cvec *argv,
enum operation_type op,
cvec *nsctx)
{
int retval = -1;
char *api_path_fmt; /* xml key format */
char *api_path = NULL; /* xml key */
cg_var *arg;
cbuf *cb = NULL;
yang_stmt *yspec;
cxobj *xbot = NULL; /* xpath, NULL if datastore */
yang_stmt *y = NULL; /* yang spec of xpath */
cxobj *xtop = NULL; /* xpath root */
cxobj *xa; /* attribute */
cxobj *xerr = NULL;
int ret;
cg_var *cv;
int cvv_i = 0;
if (cvec_len(argv) != 1){
clicon_err(OE_PLUGIN, EINVAL, "Requires one element to be xml key format string");
goto done;
}
if ((yspec = clicon_dbspec_yang(h)) == NULL){
clicon_err(OE_FATAL, 0, "No DB_SPEC");
goto done;
}
arg = cvec_i(argv, 0);
api_path_fmt = cv_string_get(arg);
/* Transform template format string + cvv to actual api-path
* cvv_i indicates if all cvv entries were used
*/
if (api_path_fmt2api_path(api_path_fmt, cvv, &api_path, &cvv_i) < 0)
goto done;
/* Create config top-of-tree */
if ((xtop = xml_new(NETCONF_INPUT_CONFIG, NULL, CX_ELMNT)) == NULL)
goto done;
xbot = xtop;
if (api_path){
if ((ret = api_path2xml(api_path, yspec, xtop, YC_DATANODE, 1, &xbot, &y, &xerr)) < 0)
goto done;
if (ret == 0){
if ((cb = cbuf_new()) == NULL){
clicon_err(OE_UNIX, errno, "cbuf_new");
goto done;
}
cprintf(cb, "api-path syntax error \"%s\": ", api_path_fmt);
if (netconf_err2cb(xerr, cb) < 0)
goto done;
clicon_err(OE_CFG, EINVAL, "%s", cbuf_get(cb));
goto done;
}
}
if ((xa = xml_new("operation", xbot, CX_ATTR)) == NULL)
goto done;
if (xml_prefix_set(xa, NETCONF_BASE_PREFIX) < 0)
goto done;
if (xml_value_set(xa, xml_operation2str(op)) < 0)
goto done;
/* Add body last in case of leaf */
if (cvec_len(cvv) > 1 &&
(yang_keyword_get(y) == Y_LEAF)){
/* Add the body last if there is remaining element that was not used in the
* earlier api-path transformation.
* This is to handle differences between:
* DELETE <foo>bar</foo> and DELETE <foo/>
* i.e., (1) deletion of a specific leaf entry vs (2) deletion of any entry
* Discussion: one can claim (1) is "bad" usage but one could see cases where
* you would want to delete a value if it has a specific value but not otherwise
*/
if (cvv_i != cvec_len(cvv))
if (dbxml_body(xbot, cvv) < 0)
goto done;
/* Loop over namespace context and add them to this leaf node */
cv = NULL;
while ((cv = cvec_each(nsctx, cv)) != NULL){
char *ns = cv_string_get(cv);
char *pf = cv_name_get(cv);
if (ns && pf && xmlns_set(xbot, pf, ns) < 0)
goto done;
}
}
if ((cb = cbuf_new()) == NULL){
clicon_err(OE_XML, errno, "cbuf_new");
goto done;
}
if (clicon_xml2cbuf(cb, xtop, 0, 0, -1) < 0)
goto done;
if (clicon_rpc_edit_config(h, "candidate", OP_NONE, cbuf_get(cb)) < 0)
goto done;
retval = 0;
done:
if (xerr)
xml_free(xerr);
if (cb)
cbuf_free(cb);
if (api_path)
free(api_path);
if (xtop)
xml_free(xtop);
return retval;
}
/*! Set datastore xml entry
* @param[in] h Clicon handle
* @param[in] cvv Vector of cli string and instantiated variables
* @param[in] argv Vector. First element xml key format string, eg "/aaa/%s"
*/
int
cli_set(clicon_handle h,
cvec *cvv,
cvec *argv)
{
int retval = -1;
if (cli_dbxml(h, cvv, argv, OP_REPLACE, NULL) < 0)
goto done;
retval = 0;
done:
return retval;
}
/*! Merge datastore xml entry
* @param[in] h Clicon handle
* @param[in] cvv Vector of cli string and instantiated variables
* @param[in] argv Vector. First element xml key format string, eg "/aaa/%s"
*/
int
cli_merge(clicon_handle h,
cvec *cvv,
cvec *argv)
{
int retval = -1;
if (cli_dbxml(h, cvv, argv, OP_MERGE, NULL) < 0)
goto done;
retval = 0;
done:
return retval;
}
/*! Create datastore xml entry
* @param[in] h Clicon handle
* @param[in] cvv Vector of cli string and instantiated variables
* @param[in] argv Vector. First element xml key format string, eg "/aaa/%s"
*/
int
cli_create(clicon_handle h,
cvec *cvv,
cvec *argv)
{
int retval = -1;
if (cli_dbxml(h, cvv, argv, OP_CREATE, NULL) < 0)
goto done;
retval = 0;
done:
return retval;
}
/*! Remove datastore xml entry
* @param[in] h Clicon handle
* @param[in] cvv Vector of cli string and instantiated variables
* @param[in] argv Vector. First element xml key format string, eg "/aaa/%s"
* @see cli_del
*/
int
cli_remove(clicon_handle h,
cvec *cvv,
cvec *argv)
{
int retval = -1;
if (cli_dbxml(h, cvv, argv, OP_REMOVE, NULL) < 0)
goto done;
retval = 0;
done:
return retval;
}
/*! Delete datastore xml
* @param[in] h Clicon handle
* @param[in] cvv Vector of cli string and instantiated variables
* @param[in] argv Vector. First element xml key format string, eg "/aaa/%s"
*/
int
cli_del(clicon_handle h,
cvec *cvv,
cvec *argv)
{
int retval = -1;
if (cli_dbxml(h, cvv, argv, OP_REMOVE, NULL) < 0)
goto done;
retval = 0;
done:
return retval;
}
/*! Set debug level on CLI client (not backend daemon)
* @param[in] h Clicon handle
* @param[in] vars If variable "level" exists, its integer value is used
* @param[in] arg Else use the integer value of argument
* @note The level is either what is specified in arg as int argument.
* _or_ if a 'level' variable is present in vars use that value instead.
*/
int
cli_debug_cli(clicon_handle h,
cvec *vars,
cvec *argv)
{
int retval = -1;
cg_var *cv;
int level;
if ((cv = cvec_find_var(vars, "level")) == NULL){
if (cvec_len(argv) != 1){
clicon_err(OE_PLUGIN, EINVAL, "Requires either label var or single arg: 0|1");
goto done;
}
cv = cvec_i(argv, 0);
}
level = cv_int32_get(cv);
/* cli */
clicon_debug_init(level, NULL); /* 0: dont debug, 1:debug */
retval = 0;
done:
return retval;
}
/*! Set debug level on backend daemon (not CLI)
* @param[in] h Clicon handle
* @param[in] vars If variable "level" exists, its integer value is used
* @param[in] arg Else use the integer value of argument
* @note The level is either what is specified in arg as int argument.
* _or_ if a 'level' variable is present in vars use that value instead.
*/
int
cli_debug_backend(clicon_handle h,
cvec *vars,
cvec *argv)
{
int retval = -1;
cg_var *cv;
int level;
if ((cv = cvec_find_var(vars, "level")) == NULL){
if (cvec_len(argv) != 1){
clicon_err(OE_PLUGIN, EINVAL, "Requires either label var or single arg: 0|1");
goto done;
}
cv = cvec_i(argv, 0);
}
level = cv_int32_get(cv);
/* config daemon */
retval = clicon_rpc_debug(h, level);
done:
return retval;
}
/*! Set debug level on restconf daemon
* @param[in] h Clicon handle
* @param[in] vars If variable "level" exists, its integer value is used
* @param[in] arg Else use the integer value of argument
* @note The level is either what is specified in arg as int argument.
* _or_ if a 'level' variable is present in vars use that value instead.
* @notes
* 1. clixon-restconf.yang is used (so that debug config can be set)
* 2. AND the <restconf> XML is in running db not in clixon-config (so that restconf read the new config from backend)
* 3 CLICON_BACKEND_RESTCONF_PROCESS is true (so that backend restarts restconf)
*/
int
cli_debug_restconf(clicon_handle h,
cvec *vars,
cvec *argv)
{
int retval = -1;
cg_var *cv;
int level;
if ((cv = cvec_find_var(vars, "level")) == NULL){
if (cvec_len(argv) != 1){
clicon_err(OE_PLUGIN, EINVAL, "Requires either label var or single arg: 0|1");
goto done;
}
cv = cvec_i(argv, 0);
}
level = cv_int32_get(cv);
/* restconf daemon */
retval = clicon_rpc_restconf_debug(h, level);
done:
return retval;
}
/*! Set syntax mode
*/
int
cli_set_mode(clicon_handle h,
cvec *vars,
cvec *argv)
{
int retval = -1;
char *str = NULL;
if (cvec_len(argv) != 1){
clicon_err(OE_PLUGIN, EINVAL, "Requires one element to be cli mode");
goto done;
}
str = cv_string_get(cvec_i(argv, 0));
cli_set_syntax_mode(h, str);
retval = 0;
done:
return retval;
}
/*! Start bash from cli callback
* Typical usage: shell("System Bash") <source:rest>, cli_start_shell();
*/
int
cli_start_shell(clicon_handle h,
cvec *vars,
cvec *argv)
{
char *cmd;
struct passwd *pw;
int retval = -1;
char bcmd[128];
cg_var *cv1 = cvec_i(vars, 1);
sigset_t oldsigset;
struct sigaction oldsigaction[32] = {0,};
cmd = (cvec_len(vars)>1 ? cv_string_get(cv1) : NULL);
if ((pw = getpwuid(getuid())) == NULL){
clicon_err(OE_UNIX, errno, "getpwuid");
goto done;
}
if (chdir(pw->pw_dir) < 0){
clicon_err(OE_UNIX, errno, "chdir");
endpwent();
goto done;
}
endpwent();
if (clixon_signal_save(&oldsigset, oldsigaction) < 0)
goto done;
cli_signal_flush(h);
cli_signal_unblock(h);
if (cmd){
snprintf(bcmd, 128, "bash -l -c \"%s\"", cmd);
if (system(bcmd) < 0){
cli_signal_block(h);
clicon_err(OE_UNIX, errno, "system(bash -c)");
goto done;
}
}
else
if (system("bash -l") < 0){
cli_signal_block(h);
clicon_err(OE_UNIX, errno, "system(bash)");
goto done;
}
cli_signal_block(h);
#if 0 /* Allow errcodes from bash */
if (retval != 0){
clicon_err(OE_UNIX, errno, "system(%s) %d", cmd, retval);
goto done;
}
#endif
if (clixon_signal_restore(&oldsigset, oldsigaction) < 0)
goto done;
retval = 0;
done:
return retval;
}
/*! Generic quit callback
*/
int
cli_quit(clicon_handle h,
cvec *vars,
cvec *argv)
{
cligen_exiting_set(cli_cligen(h), 1);
return 0;
}
/*! Generic commit callback
* @param[in] argv No arguments expected
*/
int
cli_commit(clicon_handle h,
cvec *vars,
cvec *argv)
{
int retval = -1;
if ((retval = clicon_rpc_commit(h)) < 0)
goto done;
retval = 0;
done:
return retval;
}
/*! Generic validate callback
*/
int
cli_validate(clicon_handle h,
cvec *vars,
cvec *argv)
{
int retval = -1;
if ((retval = clicon_rpc_validate(h, "candidate")) < 0)
goto done;
retval = 0;
done:
return retval;
}
/*! Compare two dbs using XML. Write to file and run diff
*/
static int
compare_xmls(cxobj *xc1,
cxobj *xc2,
int astext)
{
int fd;
FILE *f;
char filename1[MAXPATHLEN];
char filename2[MAXPATHLEN];
int retval = -1;
cxobj *xc;
cbuf *cb = NULL;
snprintf(filename1, sizeof(filename1), "/tmp/cliconXXXXXX");
snprintf(filename2, sizeof(filename2), "/tmp/cliconXXXXXX");
if ((fd = mkstemp(filename1)) < 0){
clicon_err(OE_UNDEF, errno, "tmpfile");
goto done;
}
if ((f = fdopen(fd, "w")) == NULL)
goto done;
xc = NULL;
if (astext)
while ((xc = xml_child_each(xc1, xc, -1)) != NULL)
xml2txt_cb(f, xc, cligen_output);
else
while ((xc = xml_child_each(xc1, xc, -1)) != NULL)
clicon_xml2file_cb(f, xc, 0, 1, cligen_output);
fclose(f);
close(fd);
if ((fd = mkstemp(filename2)) < 0){
clicon_err(OE_UNDEF, errno, "mkstemp: %s", strerror(errno));
goto done;
}
if ((f = fdopen(fd, "w")) == NULL)
goto done;
xc = NULL;
if (astext)
while ((xc = xml_child_each(xc2, xc, -1)) != NULL)
xml2txt_cb(f, xc, cligen_output);
else
while ((xc = xml_child_each(xc2, xc, -1)) != NULL)
clicon_xml2file_cb(f, xc, 0, 1, cligen_output);
fclose(f);
close(fd);
if ((cb = cbuf_new()) == NULL){
clicon_err(OE_CFG, errno, "cbuf_new");
goto done;
}
cprintf(cb, "diff -dU 1 %s %s | grep -v @@ | sed 1,2d",
filename1, filename2);
if (system(cbuf_get(cb)) < 0)
goto done;
retval = 0;
done:
if (cb)
cbuf_free(cb);
unlink(filename1);
unlink(filename2);
return retval;
}
/*! Compare two dbs using XML. Write to file and run diff
* @param[in] h Clicon handle
* @param[in] cvv
* @param[in] arg arg: 0 as xml, 1: as text
*/
int
compare_dbs(clicon_handle h,
cvec *cvv,
cvec *argv)
{
cxobj *xc1 = NULL; /* running xml */
cxobj *xc2 = NULL; /* candidate xml */
cxobj *xerr = NULL;
int retval = -1;
int astext;
if (cvec_len(argv) > 1){
clicon_err(OE_PLUGIN, EINVAL, "Requires 0 or 1 element. If given: astext flag 0|1");
goto done;
}
if (cvec_len(argv))
astext = cv_int32_get(cvec_i(argv, 0));
else
astext = 0;
if (clicon_rpc_get_config(h, NULL, "running", "/", NULL, &xc1) < 0)
goto done;
if ((xerr = xpath_first(xc1, NULL, "/rpc-error")) != NULL){
clixon_netconf_error(xerr, "Get configuration", NULL);
goto done;
}
if (clicon_rpc_get_config(h, NULL, "candidate", "/", NULL, &xc2) < 0)
goto done;
if ((xerr = xpath_first(xc2, NULL, "/rpc-error")) != NULL){
clixon_netconf_error(xerr, "Get configuration", NULL);
goto done;
}
if (compare_xmls(xc1, xc2, astext) < 0) /* astext? */
goto done;
retval = 0;
done:
if (xc1)
xml_free(xc1);
if (xc2)
xml_free(xc2);
return retval;
}
/*! Load a configuration file to candidate database
* Utility function used by cligen spec file
* @param[in] h CLICON handle
* @param[in] cvv Vector of variables (where <varname> is found)
* @param[in] argv A string: "<varname> <operation> [<format>]"
* <varname> is name of a variable occuring in "cvv" containing filename
* <operation> : merge or replace
* <format> "text"|"xml"|"json"|"cli"|"netconf" (see format_enum)
*
* @note that "filename" is local on client filesystem not backend.
* @note file is assumed to have a dummy top-tag, eg <clicon></clicon>
* @code
* # cligen spec
* load file <name2:string>, load_config_file("name2","merge");
* @endcode
* @see save_config_file
*/
int
load_config_file(clicon_handle h,
cvec *cvv,
cvec *argv)
{
int ret = -1;
struct stat st;
char *filename = NULL;
int replace;
cg_var *cv;
char *opstr;
char *varstr;
FILE *fp = NULL;
cxobj *xt = NULL;
cxobj *x;
cbuf *cbxml;
char *formatstr;
enum format_enum format = FORMAT_XML;
if (cvec_len(argv) < 2 || cvec_len(argv) > 4){
clicon_err(OE_PLUGIN, EINVAL, "Received %d arguments. Expected: <dbname>,<varname>[,<format>]",
cvec_len(argv));
goto done;
}
if (cvec_len(argv) > 2){
formatstr = cv_string_get(cvec_i(argv, 2));
if ((int)(format = format_str2int(formatstr)) < 0){
clicon_err(OE_PLUGIN, 0, "Not valid format: %s", formatstr);
goto done;
}
}
varstr = cv_string_get(cvec_i(argv, 0));
opstr = cv_string_get(cvec_i(argv, 1));
if (strcmp(opstr, "merge") == 0)
replace = 0;
else if (strcmp(opstr, "replace") == 0)
replace = 1;
else{
clicon_err(OE_PLUGIN, 0, "No such op: %s, expected merge or replace", opstr);
goto done;
}
if ((cv = cvec_find(cvv, varstr)) == NULL){
clicon_err(OE_PLUGIN, 0, "No such var name: %s", varstr);
goto done;
}
filename = cv_string_get(cv);
if (stat(filename, &st) < 0){
clicon_err(OE_UNIX, errno, "load_config: stat(%s)", filename);
goto done;
}
/* Open and parse local file into xml */
if ((fp = fopen(filename, "r")) == NULL){
clicon_err(OE_UNIX, errno, "open(%s)", filename);
goto done;
}
switch (format){
case FORMAT_XML:
if (clixon_xml_parse_file(fp, YB_NONE, NULL, &xt, NULL) < 0)
goto done;
break;
case FORMAT_JSON:
if (clixon_json_parse_file(fp, YB_NONE, NULL, &xt, NULL) < 0)
goto done;
break;
default:
clicon_err(OE_PLUGIN, 0, "format: %s not implemented", formatstr);
goto done;
break;
}
if (xt == NULL)
goto done;
if ((cbxml = cbuf_new()) == NULL)
goto done;
x = NULL;
while ((x = xml_child_each(xt, x, -1)) != NULL) {
/* Read as datastore-top but transformed into an edit-config "config" */
xml_name_set(x, NETCONF_INPUT_CONFIG);
if (clicon_xml2cbuf(cbxml, x, 0, 0, -1) < 0)
goto done;
}
if (clicon_rpc_edit_config(h, "candidate",
replace?OP_REPLACE:OP_MERGE,
cbuf_get(cbxml)) < 0)
goto done;
cbuf_free(cbxml);
// }
ret = 0;
done:
if (xt)
xml_free(xt);
if (fp)
fclose(fp);
return ret;
}
/*! Copy database to local file as XMLn
*
* Utility function used by cligen spec file
* @param[in] h CLICON handle
* @param[in] cvv variable vector (containing <varname>)
* @param[in] argv a string: "<dbname> <varname> [<format>]"
* <dbname> is running, candidate, or startup
* <varname> is name of cligen variable in the "cvv" vector containing file name
* <format> "text"|"xml"|"json"|"cli"|"netconf" (see format_enum)
* Note that "filename" is local on client filesystem not backend.
* The function can run without a local database
* @note The file is saved with dummy top-tag: clicon: <clicon></clicon>
* @code
* save file <name:string>, save_config_file("running name");
* @endcode
* @see load_config_file
*/
int
save_config_file(clicon_handle h,
cvec *cvv,
cvec *argv)
{
int retval = -1;
char *filename = NULL;
cg_var *cv;
char *dbstr;
char *varstr;
cxobj *xt = NULL;
cxobj *xerr;
FILE *f = NULL;
enum genmodel_type gt;
char *formatstr;
enum format_enum format = FORMAT_XML;
char *prefix = "set "; /* XXX hardcoded */
int pretty = 1; /* XXX hardcoded */
if (cvec_len(argv) < 2 || cvec_len(argv) > 4){
clicon_err(OE_PLUGIN, EINVAL, "Received %d arguments. Expected: <dbname>,<varname>[,<format>]",
cvec_len(argv));
goto done;
}
if (cvec_len(argv) > 2){
formatstr = cv_string_get(cvec_i(argv, 2));
if ((int)(format = format_str2int(formatstr)) < 0){
clicon_err(OE_PLUGIN, 0, "Not valid format: %s", formatstr);
goto done;
}
}
dbstr = cv_string_get(cvec_i(argv, 0));
if (strcmp(dbstr, "running") != 0 &&
strcmp(dbstr, "candidate") != 0 &&
strcmp(dbstr, "startup") != 0) {
clicon_err(OE_PLUGIN, 0, "No such db name: %s", dbstr);
goto done;
}
varstr = cv_string_get(cvec_i(argv, 1));
if ((cv = cvec_find(cvv, varstr)) == NULL){
clicon_err(OE_PLUGIN, 0, "No such var name: %s", varstr);
goto done;
}
filename = cv_string_get(cv);
if (clicon_rpc_get_config(h, NULL, dbstr,"/", NULL, &xt) < 0)
goto done;
if (xt == NULL){
clicon_err(OE_CFG, 0, "get config: empty tree"); /* Shouldnt happen */
goto done;
}
if ((xerr = xpath_first(xt, NULL, "/rpc-error")) != NULL){
clixon_netconf_error(xerr, "Get configuration", NULL);
goto done;
}
/* get-config returns a <data> tree. Save as <config> tree so it can be used
* as data-store.
*/
if (xml_name_set(xt, DATASTORE_TOP_SYMBOL) < 0)
goto done;
if ((f = fopen(filename, "w")) == NULL){
clicon_err(OE_CFG, errno, "Creating file %s", filename);
goto done;
}
switch (format){
case FORMAT_XML:
if (clicon_xml2file(f, xt, 0, pretty) < 0)
goto done;
break;
case FORMAT_JSON:
if (xml2json(f, xt, pretty) < 0)
goto done;
break;
case FORMAT_TEXT:
cli_xml2txt(xt, cligen_output, 0); /* tree-formed text */
break;
case FORMAT_CLI:
if ((gt = clicon_cli_genmodel_type(h)) == GT_ERR)
goto done;
if (xml2cli(f, xt, prefix, gt) < 0)
goto done;
break;
case FORMAT_NETCONF:
fprintf(f, "<rpc xmlns=\"%s\"><edit-config><target><candidate/></target><config>",
NETCONF_BASE_NAMESPACE);
fprintf(f, "\n");
if (clicon_xml2file(f, xt, 0, pretty) < 0)
goto done;
fprintf(f, "</config></edit-config></rpc>]]>]]>\n");
break;
} /* switch */
retval = 0;
/* Fall through */
done:
if (xt)
xml_free(xt);
if (f != NULL)
fclose(f);
return retval;
}
/*! Delete all elements in a database
* Utility function used by cligen spec file
*/
int
delete_all(clicon_handle h,
cvec *cvv,
cvec *argv)
{
char *dbstr;
int retval = -1;
if (cvec_len(argv) != 1){
clicon_err(OE_PLUGIN, EINVAL, "Requires one element: dbname");
goto done;
}
dbstr = cv_string_get(cvec_i(argv, 0));
if (strcmp(dbstr, "running") != 0 &&
strcmp(dbstr, "candidate") != 0 &&
strcmp(dbstr, "startup") != 0){
clicon_err(OE_PLUGIN, 0, "No such db name: %s", dbstr);
goto done;
}
if (clicon_rpc_delete_config(h, dbstr) < 0)
goto done;
retval = 0;
done:
return retval;
}
/*! Discard all changes in candidate and replace with running
*/
int
discard_changes(clicon_handle h,
cvec *cvv,
cvec *argv)
{
return clicon_rpc_discard_changes(h);
}
/*! Copy from one database to another, eg running->startup
* @param[in] argv a string: "<db1> <db2>" Copy from db1 to db2
*/
int
db_copy(clicon_handle h,
cvec *cvv,
cvec *argv)
{
char *db1;
char *db2;
db1 = cv_string_get(cvec_i(argv, 0));
db2 = cv_string_get(cvec_i(argv, 1));
return clicon_rpc_copy_config(h, db1, db2);
}
/*! This is the callback used by cli_setlog to print log message in CLI
* param[in] s UNIX socket from backend where message should be read
* param[in] arg format: txt, xml, xml2txt, xml2json
*/
static int
cli_notification_cb(int s,
void *arg)
{
struct clicon_msg *reply = NULL;
int eof;
int retval = -1;
cxobj *xt = NULL;
cxobj *xe;
cxobj *x;
enum format_enum format = (enum format_enum)arg;
int ret;
/* get msg (this is the reason this function is called) */
if (clicon_msg_rcv(s, &reply, &eof) < 0)
goto done;
if (eof){
clicon_err(OE_PROTO, ESHUTDOWN, "Socket unexpected close");
close(s);
errno = ESHUTDOWN;
clixon_event_unreg_fd(s, cli_notification_cb);
goto done;
}
/* XXX pass yang_spec and use xerr*/
if ((ret = clicon_msg_decode(reply, NULL, NULL, &xt, NULL)) < 0)
goto done;
if (ret == 0){ /* will not happen since no yspec ^*/
clicon_err(OE_NETCONF, EFAULT, "Notification malformed");
goto done;
}
if ((xe = xpath_first(xt, NULL, "//event")) != NULL){
x = NULL;
while ((x = xml_child_each(xe, x, -1)) != NULL) {
switch (format){
case FORMAT_XML:
if (clicon_xml2file_cb(stdout, x, 0, 1, cligen_output) < 0)
goto done;
break;
case FORMAT_TEXT:
if (xml2txt_cb(stdout, x, cligen_output) < 0)
goto done;
break;
case FORMAT_JSON:
if (xml2json_cb(stdout, x, 1, cligen_output) < 0)
goto done;
break;
default:
break;
}
if (cli_output_status() < 0)
break;
}
}
retval = 0;
done:
if (xt)
xml_free(xt);
if (reply)
free(reply);
return retval;
}
/*! Make a notify subscription to backend and un/register callback for return messages.
*
* @param[in] h Clicon handle
* @param[in] cvv Not used
* @param[in] arg A string with <log stream name> <stream status> [<format>]
* where <status> is "0" or "1"
* and <format> is XXX
* Example code: Start logging of mystream and show logs as xml
* @code
* cmd("comment"), cli_notify("mystream","1","xml");
* @endcode
* XXX: format is a memory leak
*/
int
cli_notify(clicon_handle h,
cvec *cvv,
cvec *argv)
{
char *stream = NULL;
int retval = -1;
int status;
char *formatstr = NULL;
enum format_enum format = FORMAT_TEXT;
if (cvec_len(argv) != 2 && cvec_len(argv) != 3){
clicon_err(OE_PLUGIN, EINVAL, "Requires arguments: <logstream> <status> [<format>]");
goto done;
}
stream = cv_string_get(cvec_i(argv, 0));
status = atoi(cv_string_get(cvec_i(argv, 1)));
if (cvec_len(argv) > 2){
formatstr = cv_string_get(cvec_i(argv, 2));
format = format_str2int(formatstr);
}
if (cli_notification_register(h,
stream,
format,
"",
status,
cli_notification_cb,
(void*)format) < 0)
goto done;
retval = 0;
done:
return retval;
}
/*! Lock database
*
* @param[in] h Clicon handle
* @param[in] cvv Not used
* @param[in] arg A string with <database>
* @code
* lock("comment"), cli_lock("running");
* @endcode
* XXX: format is a memory leak
*/
int
cli_lock(clicon_handle h,
cvec *cvv,
cvec *argv)
{
char *db;
int retval = -1;
if (cvec_len(argv) != 1){
clicon_err(OE_PLUGIN, EINVAL, "Requires arguments: <db>");
goto done;
}
db = cv_string_get(cvec_i(argv, 0));
if (clicon_rpc_lock(h, db) < 0)
goto done;
retval = 0;
done:
return retval;
}
/*! Unlock database
*
* @param[in] h Clicon handle
* @param[in] cvv Not used
* @param[in] arg A string with <database>
* @code
* lock("comment"), cli_lock("running");
* @endcode
* XXX: format is a memory leak
*/
int
cli_unlock(clicon_handle h,
cvec *cvv,
cvec *argv)
{
char *db;
int retval = -1;
if (cvec_len(argv) != 1){
clicon_err(OE_PLUGIN, EINVAL, "Requires arguments: <db>");
goto done;
}
db = cv_string_get(cvec_i(argv, 0));
if (clicon_rpc_unlock(h, db) < 0)
goto done;
retval = 0;
done:
return retval;
}
/*! Copy one configuration object to antother
*
* Works for objects that are items in a yang list with a keyname, eg as:
* list sender{
* key name;
* leaf name{...
*
* @param[in] h CLICON handle
* @param[in] cvv Vector of variables from CLIgen command-line
* @param[in] argv Vector: <db>, <xpath>, <field>, <fromvar>, <tovar>
* Explanation of argv fields:
* db: Database name, eg candidate|tmp|startup
* xpath: XPATH expression with exactly two %s pointing to field and from name
* namespace: XPATH default namespace
* field: Name of list key, eg name
* fromvar: Name of variable containing name of object to copy from (given by xpath)
* tovar: Name of variable containing name of object to copy to.
* @code
* cli spec:
* copy snd <n1:string> to <n2:string>, cli_copy_config("candidate", "/sender[%s='%s']", "urn:example:clixon", "from", "n1", "n2");
* cli command:
* copy snd from to to
* @endcode
*/
int
cli_copy_config(clicon_handle h,
cvec *cvv,
cvec *argv)
{
int retval = -1;
char *db;
cxobj *x1 = NULL;
cxobj *x2 = NULL;
cxobj *x;
char *xpath;
char *namespace;
int i;
int j;
cbuf *cb = NULL;
char *keyname;
char *fromvar;
cg_var *fromcv;
char *fromname = NULL;
char *tovar;
cg_var *tocv;
char *toname;
cxobj *xerr;
cvec *nsc = NULL;
size_t len;
if (cvec_len(argv) != 6){
clicon_err(OE_PLUGIN, EINVAL, "Requires 6 elements: <db> <xpath> <namespace> <keyname> <from> <to>");
goto done;
}
/* First argv argument: Database */
db = cv_string_get(cvec_i(argv, 0));
/* Second argv argument: xpath */
xpath = cv_string_get(cvec_i(argv, 1));
/* Third argv argument: namespace */
namespace = cv_string_get(cvec_i(argv, 2));
/* Third argv argument: name of keyname */
keyname = cv_string_get(cvec_i(argv, 3));
/* Fourth argv argument: from variable */
fromvar = cv_string_get(cvec_i(argv, 4));
/* Fifth argv argument: to variable */
tovar = cv_string_get(cvec_i(argv, 5));
/* Get from variable -> cv -> from name */
if ((fromcv = cvec_find(cvv, fromvar)) == NULL){
clicon_err(OE_PLUGIN, 0, "fromvar '%s' not found in cligen var list", fromvar);
goto done;
}
/* Get from name from cv */
fromname = cv_string_get(fromcv);
/* Create xpath */
if ((cb = cbuf_new()) == NULL){
clicon_err(OE_PLUGIN, errno, "cbuf_new");
goto done;
}
/* Sanity check that xpath contains exactly two %s, ie [%s='%s'] */
len = strlen(xpath);
j = 0;
for (i=0; i<len; i++){
if (xpath[i] == '%')
j++;
}
if (j != 2){
clicon_err(OE_PLUGIN, 0, "xpath '%s' does not have two '%%'", xpath);
goto done;
}
cprintf(cb, xpath, keyname, fromname);
if ((nsc = xml_nsctx_init(NULL, namespace)) == NULL)
goto done;
/* Get from object configuration and store in x1 */
if (clicon_rpc_get_config(h, NULL, db, cbuf_get(cb), nsc, &x1) < 0)
goto done;
if ((xerr = xpath_first(x1, NULL, "/rpc-error")) != NULL){
clixon_netconf_error(xerr, "Get configuration", NULL);
goto done;
}
/* Get to variable -> cv -> to name */
if ((tocv = cvec_find(cvv, tovar)) == NULL){
clicon_err(OE_PLUGIN, 0, "tovar '%s' not found in cligen var list", tovar);
goto done;
}
toname = cv_string_get(tocv);
/* Create copy xml tree x2 */
if ((x2 = xml_new(NETCONF_INPUT_CONFIG, NULL, CX_ELMNT)) == NULL)
goto done;
if (xml_copy(x1, x2) < 0)
goto done;
xml_name_set(x2, NETCONF_INPUT_CONFIG);
cprintf(cb, "/%s", keyname);
if ((x = xpath_first(x2, nsc, "%s", cbuf_get(cb))) == NULL){
clicon_err(OE_PLUGIN, 0, "Field %s not found in copy tree", keyname);
goto done;
}
x = xml_find(x, "body");
xml_value_set(x, toname);
/* resuse cb */
cbuf_reset(cb);
/* create xml copy tree and merge it with database configuration */
clicon_xml2cbuf(cb, x2, 0, 0, -1);
if (clicon_rpc_edit_config(h, db, OP_MERGE, cbuf_get(cb)) < 0)
goto done;
retval = 0;
done:
if (nsc)
xml_nsctx_free(nsc);
if (cb)
cbuf_free(cb);
if (x1 != NULL)
xml_free(x1);
if (x2 != NULL)
xml_free(x2);
return retval;
}
int
cli_help(clicon_handle h, cvec *vars, cvec *argv)
{
cligen_handle ch = cli_cligen(h);
parse_tree *pt;
pt = cligen_pt_active_get(ch);
return cligen_help(ch, stdout, pt);
}
/*! CLI support function for restarting a plugin
*
* @param[in] h Clicon handle
* @param[in] cvv Not used
* @param[in] arg A string with <database>
* @code
* restart("comment") , cli_restart_plugin("myplugin", "restart");
* @endcode
*/
int
cli_restart_plugin(clicon_handle h,
cvec *cvv,
cvec *argv)
{
int retval = -1;
cg_var *cv;
char *plugin;
if ((cv = cvec_find_var(cvv, "plugin")) == NULL){
if (cvec_len(argv) != 1){
clicon_err(OE_PLUGIN, EINVAL, "Requires plugin variable");
goto done;
}
cv = cvec_i(argv, 0);
}
plugin = cv_string_get(cv);
retval = clicon_rpc_restart_plugin(h, plugin);
done:
return retval;
}
Reference in a new issue View git blame Copy permalink