experiments/clixon
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
clixon/util/clixon_util_xml.c
Olof hagsand 9984cfa1c8 Fixed: [default state data returned with get-config](https://github.com/clicon/clixon/issues/140) 
* Generalized default code for both config and state
2020-09-27 17:14:28 +02:00

365 lines
10 KiB
C
Raw Blame History

/*
*
***** BEGIN LICENSE BLOCK *****
Copyright (C) 2009-2016 Olof Hagsand and Benny Holmgren
Copyright (C) 2017-2019 Olof Hagsand
Copyright (C) 2020 Olof Hagsand and Rubicon Communications, LLC(Netgate)
This file is part of CLIXON.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Alternatively, the contents of this file may be used under the terms of
the GNU General Public License Version 3 or later (the "GPL"),
in which case the provisions of the GPL are applicable instead
of those above. If you wish to allow use of your version of this file only
under the terms of the GPL, and not to allow others to
use your version of this file under the terms of Apache License version 2,
indicate your decision by deleting the provisions above and replace them with
the notice and other provisions required by the GPL. If you do not delete
the provisions above, a recipient may use your version of this file under
the terms of any one of the Apache License version 2 or the GPL.
***** END LICENSE BLOCK *****
* XML support functions.
* @see https://www.w3.org/TR/2008/REC-xml-20081126
* https://www.w3.org/TR/2009/REC-xml-names-20091208
* The function can do yang validation, process xml and json, etc.
* On success, nothing is printed and exitcode 0
* On failure, an error is printed on stderr and exitcode != 0
* Failure error prints are different, it would be nice to make them more
* uniform. (see clixon_netconf_error)
*/
#ifdef HAVE_CONFIG_H
#include "clixon_config.h" /* generated by config & autoconf */
#endif
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <errno.h>
#include <string.h>
#include <limits.h>
#include <stdint.h>
#include <syslog.h>
#include <fcntl.h>
#include <sys/time.h>
#include <sys/stat.h>
/* cligen */
#include <cligen/cligen.h>
/* clixon */
#include "clixon/clixon.h"
/* Command line options passed to getopt(3) */
#define UTIL_XML_OPTS "hD:f:Jjl:pvoy:Y:t:T:u"
static int
validate_tree(clicon_handle h,
cxobj *xt,
yang_stmt *yspec)
{
int retval = -1;
int ret;
cxobj *xerr = NULL; /* malloced must be freed */
cbuf *cbret = NULL;
/* should already be populated */
/* Add default values */
if (xml_default_recurse(xt, 0) < 0)
goto done;
if (xml_apply(xt, -1, xml_sort_verify, h) < 0)
clicon_log(LOG_NOTICE, "%s: sort verify failed", __FUNCTION__);
if ((ret = xml_yang_validate_all_top(h, xt, &xerr)) < 0)
goto done;
if (ret > 0 && (ret = xml_yang_validate_add(h, xt, &xerr)) < 0)
goto done;
if (ret == 0){
if ((cbret = cbuf_new()) ==NULL){
clicon_err(OE_XML, errno, "cbuf_new");
goto done;
}
if (netconf_err2cb(xerr, cbret) < 0)
goto done;
fprintf(stderr, "xml validation error: %s\n", cbuf_get(cbret));
goto done;
}
retval = 0;
done:
if (cbret)
cbuf_free(cbret);
if (xerr)
xml_free(xerr);
return retval;
}
static int
usage(char *argv0)
{
fprintf(stderr, "usage:%s [options] with xml on stdin (unless -f)\n"
"where options are\n"
"\t-h \t\tHelp\n"
"\t-D <level> \tDebug\n"
"\t-f <file>\tXML input file (overrides stdin)\n"
"\t-J \t\tInput as JSON\n"
"\t-j \t\tOutput as JSON\n"
"\t-l <s|e|o> \tLog on (s)yslog, std(e)rr, std(o)ut (stderr is default)\n"
"\t-o \t\tOutput the file\n"
"\t-v \t\tValidate the result in terms of Yang model (requires -y)\n"
"\t-p \t\tPretty-print output\n"
"\t-y <filename> \tYang filename or dir (load all files)\n"
"\t-Y <dir> \tYang dirs (can be several)\n"
"\t-t <file>\tXML top input file (where base tree is pasted to)\n"
"\t-T <path>\tXPath to where in top input file base should be pasted\n"
"\t-u \t\tTreat unknown XML as anydata\n"
,
argv0);
exit(0);
}
int
main(int argc,
char **argv)
{
int retval = -1;
int ret;
cxobj *xt = NULL; /* Base cxobj tree parsed from xml or json */
cxobj *xc;
cbuf *cb = cbuf_new();
int c;
int logdst = CLICON_LOG_STDERR;
int jsonin = 0;
int jsonout = 0;
char *input_filename = NULL;
char *top_input_filename = NULL;
char *yang_file_dir = NULL;
yang_stmt *yspec = NULL;
cxobj *xerr = NULL; /* malloced must be freed */
int pretty = 0;
int validate = 0;
int output = 0;
clicon_handle h;
struct stat st;
int fd = 0; /* base file, stdin */
int tfd = -1; /* top file */
cxobj *xcfg = NULL;
cbuf *cbret = NULL;
cxobj *xtop = NULL; /* Top tree if any */
char *top_path = NULL;
cxobj *xbot; /* Place in xtop where base cxobj is parsed */
cvec *nsc = NULL;
yang_bind yb;
int dbg = 0;
/* In the startup, logs to stderr & debug flag set later */
clicon_log_init(__FILE__, LOG_INFO, CLICON_LOG_STDERR);
/* Initialize clixon handle */
if ((h = clicon_handle_init()) == NULL)
goto done;
if ((xcfg = xml_new("clixon-config", NULL, CX_ELMNT)) == NULL)
goto done;
if (clicon_conf_xml_set(h, xcfg) < 0)
goto done;
optind = 1;
opterr = 0;
while ((c = getopt(argc, argv, UTIL_XML_OPTS)) != -1)
switch (c) {
case 'h':
usage(argv[0]);
break;
case 'D':
if (sscanf(optarg, "%d", &dbg) != 1)
usage(argv[0]);
break;
case 'f':
input_filename = optarg;
break;
case 'J':
jsonin++;
break;
case 'j':
jsonout++;
break;
case 'l': /* Log destination: s|e|o|f */
if ((logdst = clicon_log_opt(optarg[0])) < 0)
usage(argv[0]);
break;
case 'o':
output++;
break;
case 'v':
validate++;
break;
case 'p':
pretty++;
break;
case 'y':
yang_file_dir = optarg;
break;
case 'Y':
if (clicon_option_add(h, "CLICON_YANG_DIR", optarg) < 0)
goto done;
break;
case 't':
top_input_filename = optarg;
break;
case 'T': /* top file xpath */
top_path = optarg;
break;
case 'u':
if (clicon_option_bool_set(h, "CLICON_YANG_UNKNOWN_ANYDATA", 1) < 0)
goto done;
xml_bind_yang_unknown_anydata(1);
break;
default:
usage(argv[0]);
break;
}
if (validate && !yang_file_dir){
fprintf(stderr, "-v requires -y\n");
usage(argv[0]);
}
if (top_input_filename && top_path == NULL){
fprintf(stderr, "-t requires -T\n");
usage(argv[0]);
}
clicon_log_init(__FILE__, dbg?LOG_DEBUG:LOG_INFO, logdst);
clicon_debug_init(dbg, NULL);
/* 1. Parse yang */
if (yang_file_dir){
if ((yspec = yspec_new()) == NULL)
goto done;
if (stat(yang_file_dir, &st) < 0){
clicon_err(OE_YANG, errno, "%s not found", yang_file_dir);
goto done;
}
if (S_ISDIR(st.st_mode)){
if (yang_spec_load_dir(h, yang_file_dir, yspec) < 0)
goto done;
}
else{
if (yang_spec_parse_file(h, yang_file_dir, yspec) < 0)
goto done;
}
}
/* If top file is declared, the base XML/JSON is pasted as child to the top-file.
* This is to emulate sub-tress, not just top-level parsing.
* Always validated
*/
if (top_input_filename){
if ((tfd = open(top_input_filename, O_RDONLY)) < 0){
clicon_err(OE_YANG, errno, "open(%s)", top_input_filename);
goto done;
}
if ((ret = clixon_xml_parse_file(tfd, YB_MODULE, yspec, NULL, &xtop, &xerr)) < 0){
fprintf(stderr, "xml parse error: %s\n", clicon_err_reason);
goto done;
}
if (ret == 0){
clixon_netconf_error(xerr, "Parse top file", NULL);
goto done;
}
if (validate_tree(h, xtop, yspec) < 0)
goto done;
/* Compute canonical namespace context */
if (xml_nsctx_yangspec(yspec, &nsc) < 0)
goto done;
if ((xbot = xpath_first(xtop, nsc, "%s", top_path)) == NULL){
fprintf(stderr, "Path not found in top tree: %s\n", top_path);
goto done;
}
xt = xbot;
}
if (input_filename){
if ((fd = open(input_filename, O_RDONLY)) < 0){
clicon_err(OE_YANG, errno, "open(%s)", input_filename);
goto done;
}
}
/* 2. Parse data (xml/json) */
if (jsonin){
if ((ret = clixon_json_parse_file(fd, top_input_filename?YB_PARENT:YB_MODULE, yspec, &xt, &xerr)) < 0)
goto done;
if (ret == 0){
clixon_netconf_error(xerr, "util_xml", NULL);
goto done;
}
}
else{ /* XML */
if (!yang_file_dir)
yb = YB_NONE;
else if (xt == NULL)
yb = YB_MODULE;
else
yb = YB_PARENT;
if ((ret = clixon_xml_parse_file(fd, yb, yspec, NULL, &xt, &xerr)) < 0){
fprintf(stderr, "xml parse error: %s\n", clicon_err_reason);
goto done;
}
if (ret == 0){
clixon_netconf_error(xerr, "util_xml", NULL);
goto done;
}
}
/* Dump data structures (for debug) */
if (clicon_debug_get()){
cbuf_reset(cb);
xmltree2cbuf(cb, xt, 0);
fprintf(stderr, "%s\n", cbuf_get(cb));
cbuf_reset(cb);
}
/* 3. Validate data (if yspec) */
if (validate){
if (validate_tree(h, xt, yspec) < 0)
goto done;
}
/* 4. Output data (xml/json) */
if (output){
xc = NULL;
while ((xc = xml_child_each(xt, xc, -1)) != NULL)
if (jsonout)
xml2json_cbuf(cb, xc, pretty); /* print xml */
else
clicon_xml2cbuf(cb, xc, 0, pretty, -1); /* print xml */
fprintf(stdout, "%s", cbuf_get(cb));
fflush(stdout);
}
retval = 0;
done:
if (nsc)
cvec_free(nsc);
if (cbret)
cbuf_free(cbret);
if (xcfg)
xml_free(xcfg);
if (xerr)
xml_free(xerr);
if (xtop)
xml_free(xtop);
else if (xt)
xml_free(xt);
if (cb)
cbuf_free(cb);
return retval;
}
Reference in a new issue View git blame Copy permalink