experiments/clixon
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
clixon/apps/restconf/restconf_methods_patch.c
Olof hagsand aa14f8ac2c RESTCONF PUT/POST -d {} media is enforced
2019-08-06 15:47:46 +02:00

249 lines
9.4 KiB
C
Raw Blame History

/*
*
***** BEGIN LICENSE BLOCK *****
Copyright (C) 2009-2019 Olof Hagsand
This file is part of CLIXON.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Alternatively, the contents of this file may be used under the terms of
the GNU General Public License Version 3 or later (the "GPL"),
in which case the provisions of the GPL are applicable instead
of those above. If you wish to allow use of your version of this file only
under the terms of the GPL, and not to allow others to
use your version of this file under the terms of Apache License version 2,
indicate your decision by deleting the provisions above and replace them with
the notice and other provisions required by the GPL. If you do not delete
the provisions above, a recipient may use your version of this file under
the terms of any one of the Apache License version 2 or the GPL.
***** END LICENSE BLOCK *****
*/
/*
* See rfc8040
* sudo apt-get install libfcgi-dev
* gcc -o fastcgi fastcgi.c -lfcgi
* sudo su -c "/www-data/clixon_restconf -D 1 f /usr/local/etc/example.xml " -s /bin/sh www-data
* This is the interface:
* api/data/profile=<name>/metric=<name> PUT data:enable=<flag>
* api/test
+----------------------------+--------------------------------------+
| 100 Continue | POST accepted, 201 should follow |
| 200 OK | Success with response message-body |
| 201 Created | POST to create a resource success |
| 204 No Content | Success without response message- |
| | body |
| 304 Not Modified | Conditional operation not done |
| 400 Bad Request | Invalid request message |
| 401 Unauthorized | Client cannot be authenticated |
| 403 Forbidden | Access to resource denied |
| 404 Not Found | Resource target or resource node not |
| | found |
| 405 Method Not Allowed | Method not allowed for target |
| | resource |
| 409 Conflict | Resource or lock in use |
| 412 Precondition Failed | Conditional method is false |
| 413 Request Entity Too | too-big error |
| Large | |
| 414 Request-URI Too Large | too-big error |
| 415 Unsupported Media Type | non RESTCONF media type |
| 500 Internal Server Error | operation-failed |
| 501 Not Implemented | unknown-operation |
| 503 Service Unavailable | Recoverable server error |
+----------------------------+--------------------------------------+
Mapping netconf error-tag -> status code
+-------------------------+-------------+
| <error&#8209;tag> | status code |
+-------------------------+-------------+
| in-use | 409 |
| invalid-value | 400 |
| too-big | 413 |
| missing-attribute | 400 |
| bad-attribute | 400 |
| unknown-attribute | 400 |
| bad-element | 400 |
| unknown-element | 400 |
| unknown-namespace | 400 |
| access-denied | 403 |
| lock-denied | 409 |
| resource-denied | 409 |
| rollback-failed | 500 |
| data-exists | 409 |
| data-missing | 409 |
| operation-not-supported | 501 |
| operation-failed | 500 |
| partial-operation | 500 |
| malformed-message | 400 |
+-------------------------+-------------+
* "api-path" is "URI-encoded path expression" definition in RFC8040 3.5.3
*/
#ifdef HAVE_CONFIG_H
#include "clixon_config.h" /* generated by config & autoconf */
#endif
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <errno.h>
#include <signal.h>
#include <syslog.h>
#include <fcntl.h>
#include <assert.h>
#include <time.h>
#include <signal.h>
#include <limits.h>
#include <sys/time.h>
#include <sys/wait.h>
/* cligen */
#include <cligen/cligen.h>
/* clicon */
#include <clixon/clixon.h>
#include <fcgiapp.h> /* Need to be after clixon_xml-h due to attribute format */
#include "restconf_lib.h"
#include "restconf_methods_patch.h"
/*! Generic REST PATCH method for plain patch
* @param[in] h CLIXON handle
* @param[in] r Fastcgi request handle
* @param[in] api_path According to restconf (Sec 3.5.3.1 in rfc8040)
* @param[in] pcvec Vector of path ie DOCUMENT_URI element
* @param[in] pi Offset, where to start pcvec
* @param[in] qvec Vector of query string (QUERY_STRING)
* @param[in] data Stream input data
* @param[in] pretty Set to 1 for pretty-printed xml/json output
* @param[in] media_out Output media
* Netconf: <edit-config> (nc:operation="merge")
* See RFC8040 Sec 4.6.1
*/
int
api_data_patch(clicon_handle h,
FCGX_Request *r,
char *api_path0,
cvec *pcvec,
int pi,
cvec *qvec,
char *data,
int pretty,
restconf_media media_in,
restconf_media media_out)
{
int retval = -1;
yang_stmt *yspec;
// yang_stmt *ymodapi = NULL; /* yang module of api-path (if any) */
cxobj *xdata0 = NULL; /* Original -d data struct (including top symbol) */
int i;
char *api_path;
cxobj *xtop = NULL; /* top of api-path */
cxobj *xbot = NULL; /* bottom of api-path */
yang_stmt *ybot = NULL; /* yang of xbot */
cxobj *xerr = NULL; /* malloced must be freed */
cxobj *xe;
int ret;
clicon_debug(1, "%s api_path:\"%s\"", __FUNCTION__, api_path0);
clicon_debug(1, "%s data:\"%s\"", __FUNCTION__, data);
if ((yspec = clicon_dbspec_yang(h)) == NULL){
clicon_err(OE_FATAL, 0, "No DB_SPEC");
goto done;
}
api_path=api_path0;
for (i=0; i<pi; i++)
api_path = index(api_path+1, '/');
/* Create config top-of-tree */
if ((xtop = xml_new("config", NULL, NULL)) == NULL)
goto done;
/* Translate api_path to xml in the form of xtop/xbot */
xbot = xtop;
if (api_path){ /* If URI, otherwise top data/config object */
if ((ret = api_path2xml(api_path, yspec, xtop, YC_DATANODE, 1, &xbot, &ybot)) < 0)
goto done;
// if (ybot)
// ymodapi = ys_module(ybot);
if (ret == 0){ /* validation failed */
if (netconf_malformed_message_xml(&xerr, clicon_err_reason) < 0)
goto done;
clicon_err_reset();
if ((xe = xpath_first(xerr, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, r, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
}
/* Parse input data as json or xml into xml */
switch (media_in){
case YANG_DATA_XML:
if (xml_parse_string(data, yspec, &xdata0) < 0){
if (netconf_malformed_message_xml(&xerr, clicon_err_reason) < 0)
goto done;
if ((xe = xpath_first(xerr, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, r, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
break;
case YANG_DATA_JSON:
/* Data here cannot cannot be Yang populated since it is loosely
* hanging without top symbols.
* And if it is not yang populated, it cant be translated properly
* from JSON to XML.
* Therefore, yang population is done later after addsub below
*/
if ((ret = json_parse_str(data, yspec, &xdata0, &xerr)) < 0){
if (netconf_malformed_message_xml(&xerr, clicon_err_reason) < 0)
goto done;
if ((xe = xpath_first(xerr, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, r, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
if (ret == 0){
if ((xe = xpath_first(xerr, "rpc-error")) == NULL){
clicon_err(OE_XML, EINVAL, "rpc-error not found (internal error)");
goto done;
}
if (api_return_err(h, r, xe, pretty, media_out, 0) < 0)
goto done;
goto ok;
}
} /* switch media_in */
restconf_notimplemented(r);
ok:
retval = 0;
done:
if (xtop)
xml_free(xtop);
return retval;
}
Reference in a new issue View git blame Copy permalink