experiments/clixon
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
clixon/lib/src/clixon_proto.c
Olof hagsand 6335f810d3 C-API: clixon_xml2file and clixon_xml2cbuf added prefix argument 
Added in-mem xml diff function: `xml_tree_diff_print`
2023-04-12 10:44:58 +02:00

901 lines
26 KiB
C
Raw Blame History

/*
*
***** BEGIN LICENSE BLOCK *****
Copyright (C) 2009-2016 Olof Hagsand and Benny Holmgren
Copyright (C) 2017-2019 Olof Hagsand
Copyright (C) 2020-2022 Olof Hagsand and Rubicon Communications, LLC(Netgate)
This file is part of CLIXON.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
Alternatively, the contents of this file may be used under the terms of
the GNU General Public License Version 3 or later (the "GPL"),
in which case the provisions of the GPL are applicable instead
of those above. If you wish to allow use of your version of this file only
under the terms of the GPL, and not to allow others to
use your version of this file under the terms of Apache License version 2,
indicate your decision by deleting the provisions above and replace them with
the notice and other provisions required by the GPL. If you do not delete
the provisions above, a recipient may use your version of this file under
the terms of any one of the Apache License version 2 or the GPL.
***** END LICENSE BLOCK *****
*
* Protocol to communicate between clients (eg clixon_cli, clixon_netconf)
* and server (clicon_backend)
*/
#ifdef HAVE_CONFIG_H
#include "clixon_config.h" /* generated by config & autoconf */
#endif
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <string.h>
#include <syslog.h>
#include <signal.h>
#include <ctype.h>
#include <sys/types.h>
#include <sys/time.h>
#include <sys/socket.h>
#include <sys/stat.h>
#include <netinet/in.h>
#include <sys/un.h>
#include <arpa/inet.h>
/* cligen */
#include <cligen/cligen.h>
/* clicon */
#include "clixon_err.h"
#include "clixon_queue.h"
#include "clixon_hash.h"
#include "clixon_handle.h"
#include "clixon_event.h"
#include "clixon_log.h"
#include "clixon_yang.h"
#include "clixon_sig.h"
#include "clixon_xml.h"
#include "clixon_xml_io.h"
#include "clixon_netconf_lib.h"
#include "clixon_options.h"
#include "clixon_proto.h"
static int _atomicio_sig = 0;
/*! Formats (showas) derived from XML
*/
struct formatvec{
char *fv_str;
int fv_int;
};
static struct formatvec _FORMATS[] = {
{"xml", FORMAT_XML},
{"text", FORMAT_TEXT},
{"json", FORMAT_JSON},
{"cli", FORMAT_CLI},
{"netconf", FORMAT_NETCONF},
{NULL, -1}
};
/*! Translate from numeric format to string representation
* @param[in] showas Format value (see enum format_enum)
* @retval str String value
*/
char *
format_int2str(enum format_enum showas)
{
struct formatvec *fv;
for (fv=_FORMATS; fv->fv_int != -1; fv++)
if (fv->fv_int == showas)
break;
return fv?(fv->fv_str?fv->fv_str:"unknown"):"unknown";
}
/*! Translate from string to numeric format representation
* @param[in] str String value
* @retval enum Format value (see enum format_enum)
*/
enum format_enum
format_str2int(char *str)
{
struct formatvec *fv;
for (fv=_FORMATS; fv->fv_int != -1; fv++)
if (strcmp(fv->fv_str, str) == 0)
break;
return fv?fv->fv_int:-1;
}
/*! Encode a clicon netconf message using variable argument lists
* @param[in] id Session id of client
* @param[in] format Variable agrument list format an XML netconf string
* @retval NULL Error
* @retval msg Clicon message to send to eg clicon_msg_send()
* @note if format includes %, they will be expanded according to printf rules.
* if this is a problem, use ("%s", xml) instaead of (xml)
* Notaly this may an issue of RFC 3896 encoded strings
*/
struct clicon_msg *
clicon_msg_encode(uint32_t id,
const char *format, ...)
{
va_list args;
uint32_t xmllen;
uint32_t len;
struct clicon_msg *msg = NULL;
int hdrlen = sizeof(*msg);
va_start(args, format);
xmllen = vsnprintf(NULL, 0, format, args) + 1;
va_end(args);
len = hdrlen + xmllen;
if ((msg = (struct clicon_msg *)malloc(len)) == NULL){
clicon_err(OE_PROTO, errno, "malloc");
return NULL;
}
memset(msg, 0, len);
/* hdr */
msg->op_len = htonl(len);
msg->op_id = htonl(id);
/* body */
va_start(args, format);
vsnprintf(msg->op_body, xmllen, format, args);
va_end(args);
return msg;
}
/*! Decode a clicon netconf message
* @param[in] msg CLICON msg
* @param[in] yspec Yang specification, (can be NULL)
* @param[out] id Session id
* @param[out] xml XML parse tree
* @param[out] xerr Reason for failure (yang assignment not made) if retval =0
* @retval 1 Parse OK and all yang assignment made
* @retval 0 Parse OK but yang assigment not made (or only partial)
* @retval -1 Error with clicon_err called. Includes parse error
*/
int
clicon_msg_decode(struct clicon_msg *msg,
yang_stmt *yspec,
uint32_t *id,
cxobj **xml,
cxobj **xerr)
{
int retval = -1;
char *xmlstr;
int ret;
clicon_debug(CLIXON_DBG_DETAIL, "%s", __FUNCTION__);
/* hdr */
if (id)
*id = ntohl(msg->op_id);
/* body */
xmlstr = msg->op_body;
// XXX clicon_debug(CLIXON_DBG_MSG, "Recv: %s", xmlstr);
if ((ret = clixon_xml_parse_string(xmlstr, yspec?YB_RPC:YB_NONE, yspec, xml, xerr)) < 0)
goto done;
if (ret == 0)
goto fail;
retval = 1;
done:
return retval;
fail:
retval = 0;
goto done;
}
/*! Open local connection using unix domain sockets
* @param[in] h Clicon handle
* @param[in] sockpath Unix domain file path
* @retval s socket
* @retval -1 error
*/
int
clicon_connect_unix(clicon_handle h,
char *sockpath)
{
struct sockaddr_un addr;
int retval = -1;
int s;
if ((s = socket(AF_UNIX, SOCK_STREAM, 0)) < 0) {
clicon_err(OE_CFG, errno, "socket");
return -1;
}
memset(&addr, 0, sizeof(addr));
addr.sun_family = AF_UNIX;
strncpy(addr.sun_path, sockpath, sizeof(addr.sun_path)-1);
clicon_debug(CLIXON_DBG_DETAIL, "%s: connecting to %s", __FUNCTION__, addr.sun_path);
if (connect(s, (struct sockaddr *)&addr, SUN_LEN(&addr)) < 0){
if (errno == EACCES)
clicon_err(OE_CFG, errno, "connecting unix socket: %s. "
"Is user not member of group: \"%s\"?",
sockpath, clicon_sock_group(h));
else
clicon_err(OE_CFG, errno, "connecting unix socket: %s", sockpath);
close(s);
goto done;
}
retval = s;
done:
return retval;
}
static void
atomicio_sig_handler(int arg)
{
_atomicio_sig++;
}
/*! Ensure all of data on socket comes through. fn is either read or write
* @param[in] fn I/O function, ie read/write
* @param[in] fd File descriptor, eg socket
* @param[in] s0 Buffer to read to or write from
* @param[in] n Number of bytes to read/write, loop until done
*/
static ssize_t
atomicio(ssize_t (*fn) (int, void *, size_t),
int fd,
void *s0,
size_t n)
{
char *s = s0;
ssize_t res, pos = 0;
while (n > pos) {
_atomicio_sig = 0;
res = (fn)(fd, s + pos, n - pos);
switch (res) {
case -1:
if (errno == EINTR){
if (_atomicio_sig == 0)
continue;
}
else if (errno == EAGAIN)
continue;
else if (errno == ECONNRESET)/* Connection reset by peer */
res = 0;
else if (errno == EPIPE) /* Client shutdown */
res = 0;
else if (errno == EBADF) /* client shutdown - freebsd */
res = 0;
case 0: /* fall thru */
return (res);
default:
pos += res;
}
}
return (pos);
}
/*! Log message as hex on debug.
*
* @param[in] dbglevel Debug level
* @param[in] msg Byte stream
* @param[in] len Length of byte stream
* @param[in] file Calling file name
*/
static int
msg_hex(int dbglevel,
const char *msg,
size_t len,
char const *file)
{
int retval = -1;
cbuf *cb = NULL;
int i;
if ((dbglevel & clicon_debug_get()) == 0) /* compare debug level with global variable */
goto ok;
if ((cb = cbuf_new()) == NULL){
clicon_err(OE_CFG, errno, "cbuf_new");
goto done;
}
cprintf(cb, "%s:", file);
for (i=0; i<len; i++){
cprintf(cb, "%02x", ((char*)msg)[i]&0xff);
if ((i+1)%32==0){
clicon_debug(dbglevel, "%s", cbuf_get(cb));
cbuf_reset(cb);
cprintf(cb, "%s:", file);
}
else
if ((i+1)%4==0)
cprintf(cb, " ");
}
clicon_debug(dbglevel, "%s", cbuf_get(cb));
ok:
retval = 0;
done:
if (cb)
cbuf_free(cb);
return retval;
}
/*! Send a CLICON netconf message using internal IPC message
*
* @param[in] s socket (unix or inet) to communicate with backend
* @param[out] msg CLICON msg data reply structure. Free with free()
* @see clicon_msg_send1 using plain NETCONF
*/
int
clicon_msg_send(int s,
struct clicon_msg *msg)
{
int retval = -1;
int e;
clicon_debug(CLIXON_DBG_DETAIL, "%s: send msg len=%d", __FUNCTION__, ntohl(msg->op_len));
clicon_debug(CLIXON_DBG_MSG, "Send: %s", msg->op_body);
msg_hex(CLIXON_DBG_EXTRA, (char*)msg, ntohl(msg->op_len), __FUNCTION__);
if (atomicio((ssize_t (*)(int, void *, size_t))write,
s, msg, ntohl(msg->op_len)) < 0){
e = errno;
clicon_err(OE_CFG, e, "atomicio");
clicon_log(LOG_WARNING, "%s: write: %s len:%u msg:%s", __FUNCTION__,
strerror(e), ntohs(msg->op_len), msg->op_body);
goto done;
}
retval = 0;
done:
return retval;
}
/*! Receive a CLICON message using IPC message struct
*
* XXX: timeout? and signals?
* There is rudimentary code for turning on signals and handling them
* so that they can be interrupted by ^C. But the problem is that this
* is a library routine and such things should be set up in the cli
* application for example: a daemon calling this function will want another
* behaviour.
* Now, ^C will interrupt the whole process, and this may not be what you want.
*
* @param[in] s socket (unix or inet) to communicate with backend
* @param[in] intr If set, make a ^C cause an error
* @param[out] msg CLICON msg data reply structure. Free with free()
* @param[out] eof Set if eof encountered
* @retval 0 OK
* @retval -1 Error
* Note: caller must ensure that s is closed if eof is set after call.
* @see clicon_msg_rcv1 using plain NETCONF
*/
int
clicon_msg_rcv(int s,
int intr,
struct clicon_msg **msg,
int *eof)
{
int retval = -1;
struct clicon_msg hdr;
int hlen;
ssize_t len2;
sigfn_t oldhandler;
uint32_t mlen;
clicon_debug(CLIXON_DBG_DETAIL, "%s", __FUNCTION__);
*eof = 0;
if (intr){
clicon_signal_unblock(SIGINT);
set_signal_flags(SIGINT, 0, atomicio_sig_handler, &oldhandler);
}
if ((hlen = atomicio(read, s, &hdr, sizeof(hdr))) < 0){
if (intr && _atomicio_sig)
;
else
clicon_err(OE_CFG, errno, "atomicio");
goto done;
}
msg_hex(CLIXON_DBG_EXTRA, (char*)&hdr, hlen, __FUNCTION__);
if (hlen == 0){
*eof = 1;
goto ok;
}
if (hlen != sizeof(hdr)){
clicon_err(OE_PROTO, errno, "header too short (%d)", hlen);
goto done;
}
mlen = ntohl(hdr.op_len);
clicon_debug(CLIXON_DBG_EXTRA, "op-len:%u op-id:%u",
mlen, ntohl(hdr.op_id));
clicon_debug(CLIXON_DBG_DETAIL, "%s: rcv msg len=%d",
__FUNCTION__, mlen);
if (mlen <= sizeof(hdr)){
clicon_err(OE_PROTO, 0, "op_len:%u too short", mlen);
*eof = 1;
goto ok;
}
if ((*msg = (struct clicon_msg *)malloc(mlen+1)) == NULL){
clicon_err(OE_PROTO, errno, "malloc");
goto done;
}
memcpy(*msg, &hdr, hlen);
if ((len2 = atomicio(read, s, (*msg)->op_body, mlen - sizeof(hdr))) < 0){
clicon_err(OE_PROTO, errno, "read");
goto done;
}
if (len2)
msg_hex(CLIXON_DBG_EXTRA, (*msg)->op_body, len2, __FUNCTION__);
if (len2 != mlen - sizeof(hdr)){
clicon_err(OE_PROTO, 0, "body too short");
*eof = 1;
goto ok;
}
if (((char*)*msg)[mlen-1] != '\0'){
clicon_err(OE_PROTO, 0, "body not NULL terminated");
*eof = 1;
goto ok;
}
clicon_debug(CLIXON_DBG_MSG, "Recv: %s", (*msg)->op_body);
ok:
retval = 0;
done:
clicon_debug(CLIXON_DBG_DETAIL, "%s retval:%d", __FUNCTION__, retval);
if (intr){
set_signal(SIGINT, oldhandler, NULL);
clicon_signal_block(SIGINT);
}
return retval;
}
/*! Receive a message using plain NETCONF
*
* @param[in] s socket (unix or inet) to communicate with backend
* @param[out] cb cligen buf struct containing the incoming message
* @param[out] eof Set if eof encountered
* @see netconf_input_cb()
* @see clicon_msg_rcv using IPC message struct
* @note only NETCONF version 1.0 EOM framing
*/
int
clicon_msg_rcv1(int s,
cbuf *cb,
int *eof)
{
int retval = -1;
unsigned char buf[BUFSIZ];
int i;
int len;
int xml_state = 0;
int poll;
clicon_debug(CLIXON_DBG_DETAIL, "%s", __FUNCTION__);
*eof = 0;
memset(buf, 0, sizeof(buf));
while (1){
if ((len = read(s, buf, sizeof(buf))) < 0){
if (errno == ECONNRESET)
len = 0; /* emulate EOF */
else{
clicon_log(LOG_ERR, "%s: read: %s errno:%d", __FUNCTION__, strerror(errno), errno);
goto done;
}
} /* read */
if (len == 0){ /* EOF */
*eof = 1;
close(s);
goto ok;
}
for (i=0; i<len; i++){
if (buf[i] == 0)
continue; /* Skip NULL chars (eg from terminals) */
cprintf(cb, "%c", buf[i]);
if (detect_endtag("]]>]]>",
buf[i],
&xml_state)) {
/* OK, we have an xml string from a client */
/* Remove trailer */
*(((char*)cbuf_get(cb)) + cbuf_len(cb) - strlen("]]>]]>")) = '\0';
goto ok;
}
}
/* poll==1 if more, poll==0 if none */
if ((poll = clixon_event_poll(s)) < 0)
goto done;
if (poll == 0)
break; /* No data to read */
} /* while */
ok:
clicon_debug(CLIXON_DBG_MSG, "Recv: %s", cbuf_get(cb));
retval = 0;
done:
clicon_debug(CLIXON_DBG_DETAIL, "%s done", __FUNCTION__);
return retval;
}
/*! Send a CLICON netconf message plain NETCONF
*
* @param[in] s socket (unix or inet) to communicate with backend
* @param[out] msg CLICON msg data reply structure. Free with free()
* @see clicon_msg_send using internal IPC header
*/
int
clicon_msg_send1(int s,
cbuf *cb)
{
int retval = -1;
clicon_debug(CLIXON_DBG_DETAIL, "%s", __FUNCTION__);
clicon_debug(CLIXON_DBG_MSG, "Send: %s", cbuf_get(cb));
if (atomicio((ssize_t (*)(int, void *, size_t))write,
s, cbuf_get(cb), cbuf_len(cb)) < 0){
clicon_err(OE_CFG, errno, "atomicio");
clicon_log(LOG_WARNING, "%s: write: %s", __FUNCTION__, strerror(errno));
goto done;
}
retval = 0;
done:
return retval;
}
/*! Connect to server, send a clicon_msg message and wait for result using unix socket
*
* @param[in] h Clicon handle
* @param[in] msg CLICON msg data structure. It has fixed header and variable body.
* @param[in] sockpath Unix domain file path
* @param[out] retdata Returned data as string netconf xml tree.
* @param[out] sock0 Return socket in case of asynchronous notify
* @retval 0 OK
* @retval -1 Error
* @see clicon_rpc But this is one-shot rpc: open, send, get reply and close.
*/
int
clicon_rpc_connect_unix(clicon_handle h,
char *sockpath,
int *sock0)
{
int retval = -1;
int s = -1;
struct stat sb = {0,};
clicon_debug(CLIXON_DBG_DETAIL, "Send msg on %s", sockpath);
if (sock0 == NULL){
clicon_err(OE_NETCONF, EINVAL, "sock0 expected");
goto done;
}
/* special error handling to get understandable messages (otherwise ENOENT) */
if (stat(sockpath, &sb) < 0){
clicon_err(OE_PROTO, errno, "%s: config daemon not running?", sockpath);
goto done;
}
if (!S_ISSOCK(sb.st_mode)){
clicon_err(OE_PROTO, EIO, "%s: Not unix socket", sockpath);
goto done;
}
if ((s = clicon_connect_unix(h, sockpath)) < 0)
goto done;
*sock0 = s;
retval = 0;
done:
return retval;
}
/*! Connect to server, send a clicon_msg message and wait for result using an inet socket
*
* @param[in] h Clicon handle (not used)
* @param[in] dst IPv4 address
* @param[in] port TCP port
* @param[out] retdata Returned data as string netconf xml tree.
* @param[out] sock0 Return socket in case of asynchronous notify
* @retval 0 OK
* @retval -1 Error
* @see clicon_rpc But this is one-shot rpc: open, send, get reply and close.
*/
int
clicon_rpc_connect_inet(clicon_handle h,
char *dst,
uint16_t port,
int *sock0)
{
int retval = -1;
int s = -1;
struct sockaddr_in addr;
clicon_debug(CLIXON_DBG_DETAIL, "Send msg to %s:%hu", dst, port);
if (sock0 == NULL){
clicon_err(OE_NETCONF, EINVAL, "sock0 expected");
goto done;
}
memset(&addr, 0, sizeof(addr));
addr.sin_family = AF_INET;
addr.sin_port = htons(port);
if (inet_pton(addr.sin_family, dst, &addr.sin_addr) != 1)
goto done; /* Could check getaddrinfo */
/* special error handling to get understandable messages (otherwise ENOENT) */
if ((s = socket(addr.sin_family, SOCK_STREAM, 0)) < 0) {
clicon_err(OE_CFG, errno, "socket");
return -1;
}
if (connect(s, (struct sockaddr*)&addr, sizeof(addr)) < 0){
clicon_err(OE_CFG, errno, "connecting socket inet4");
close(s);
goto done;
}
*sock0 = s;
retval = 0;
done:
return retval;
}
/*! Send a clicon_msg message and wait for result.
*
* TBD: timeout, interrupt?
* retval may be -1 and
* errno set to ENOTCONN/ESHUTDOWN which means that socket is now closed probably
* due to remote peer disconnecting. The caller may have to do something,...
*
* @param[in] sock Socket / file descriptor
* @param[in] msg CLICON msg data structure. It has fixed header and variable body.
* @param[out] xret Returned data as netconf xml tree.
* @param[out] eof Set if eof encountered
* @retval 0 OK (check eof)
* @retval -1 Error
* @see clicon_rpc1 using plain NETCONF XML
*/
int
clicon_rpc(int sock,
struct clicon_msg *msg,
char **ret,
int *eof)
{
int retval = -1;
struct clicon_msg *reply = NULL;
char *data = NULL;
clicon_debug(CLIXON_DBG_DETAIL, "%s", __FUNCTION__);
if (clicon_msg_send(sock, msg) < 0)
goto done;
if (clicon_msg_rcv(sock, 0, &reply, eof) < 0)
goto done;
if (*eof)
goto ok;
data = reply->op_body; /* assume string */
if (ret && data)
if ((*ret = strdup(data)) == NULL){
clicon_err(OE_UNIX, errno, "strdup");
goto done;
}
ok:
retval = 0;
done:
clicon_debug(CLIXON_DBG_DETAIL, "%s retval:%d", __FUNCTION__, retval);
if (reply)
free(reply);
return retval;
}
/*! Send a netconf message and recieve result using plain NETCONF
*
* This is mainly used by the client API.
*
* @param[in] sock Socket / file descriptor
* @param[in] msgin CLICON msg data structure. It has fixed header and variable body.
* @param[out] msgret Returned data as netconf xml tree.
* @param[out] eof Set if eof encountered
* @retval 0 OK
* @retval -1 Error
* @see clicon_rpc using clicon_msg protocol header
*/
int
clicon_rpc1(int sock,
cbuf *msg,
cbuf *msgret,
int *eof)
{
int retval = -1;
clicon_debug(CLIXON_DBG_DETAIL, "%s", __FUNCTION__);
if (netconf_framing_preamble(NETCONF_SSH_CHUNKED, msg) < 0)
goto done;
if (netconf_framing_postamble(NETCONF_SSH_CHUNKED, msg) < 0)
goto done;
if (clicon_msg_send1(sock, msg) < 0)
goto done;
if (clicon_msg_rcv1(sock, msgret, eof) < 0)
goto done;
retval = 0;
done:
clicon_debug(CLIXON_DBG_DETAIL, "%s retval:%d", __FUNCTION__, retval);
return retval;
}
/*! Send a clicon_msg message as reply to a clicon rpc request
*
* @param[in] s Socket to communicate with client
* @param[in] data Returned data as byte-string.
* @param[in] datalen Length of returned data XXX may be unecessary if always string?
* @retval 0 OK
* @retval -1 Error
*/
int
send_msg_reply(int s,
char *data,
uint32_t datalen)
{
int retval = -1;
struct clicon_msg *reply = NULL;
uint32_t len;
len = sizeof(*reply) + datalen;
if ((reply = (struct clicon_msg *)malloc(len)) == NULL)
goto done;
memset(reply, 0, len);
reply->op_len = htonl(len);
if (datalen > 0)
memcpy(reply->op_body, data, datalen);
if (clicon_msg_send(s, reply) < 0)
goto done;
retval = 0;
done:
if (reply)
free(reply);
return retval;
}
/*! Send a clicon_msg NOTIFY message asynchronously to client
*
* @param[in] s Socket to communicate with client
* @param[in] level
* @param[in] event
* @retval 0 OK
* @retval -1 Error
* @see send_msg_notify_xml
*/
static int
send_msg_notify(int s,
char *event)
{
int retval = -1;
struct clicon_msg *msg = NULL;
if ((msg=clicon_msg_encode(0, "%s", event)) == NULL)
goto done;
if (clicon_msg_send(s, msg) < 0)
goto done;
retval = 0;
done:
if (msg)
free(msg);
return retval;
}
/*! Send a clicon_msg NOTIFY message asynchronously to client
*
* @param[in] h Clicon handle
* @param[in] s Socket to communicate with client
* @param[in] xev Event as XML
* @retval 0 OK
* @retval -1 Error
* @see send_msg_notify
*/
int
send_msg_notify_xml(clicon_handle h,
int s,
cxobj *xev)
{
int retval = -1;
cbuf *cb = NULL;
if ((cb = cbuf_new()) == NULL){
clicon_err(OE_PLUGIN, errno, "cbuf_new");
goto done;
}
if (clixon_xml2cbuf(cb, xev, 0, 0, NULL, -1, 0) < 0)
goto done;
if (send_msg_notify(s, cbuf_get(cb)) < 0)
goto done;
retval = 0;
done:
clicon_debug(CLIXON_DBG_DETAIL, "%s %d", __FUNCTION__, retval);
if (cb)
cbuf_free(cb);
return retval;
}
/*! Look for a text pattern in an input string, one char at a time
* @param[in] tag What to look for
* @param[in] ch New input character
* @param[in,out] state A state integer holding how far we have parsed.
* @retval 0 No, we havent detected end tag
* @retval 1 Yes, we have detected end tag!
* @code
* int state = 0;
* char ch;
* while (1) {
* // read ch
* if (detect_endtag("mypattern", ch, &state)) {
* // mypattern is matched
* }
* }
* @endcode
*/
int
detect_endtag(char *tag,
char ch,
int *state)
{
int retval = 0;
if (tag[*state] == ch){
(*state)++;
if (*state == strlen(tag)){
*state = 0;
retval = 1;
}
}
else
*state = 0;
return retval;
}
/*! Given family, addr str, port, return sockaddr and length
*
* @param[in] addrtype Address family: inet:ipv4-address or inet:ipv6-address
* @param[in] addrstr IP address as string
* @param[in] port TCP port host byte order
* @param[out] sa sockaddr, should be allocated
* @param[out] salen length of sockaddr data
* @code
* struct sockaddr_in6 sin6 = {0,}; // because its larger than sin and sa
* struct sockaddr *sa = &sin6;
* size_t sa_len;
* if (clixon_inet2sin(inet:ipv4-address, "0.0.0.0", 80, sa, &sa_len) < 0)
* err;
* @endcode
* Probably misplaced, need a clixon_network file?
*/
int
clixon_inet2sin(const char *addrtype,
const char *addrstr,
uint16_t port,
struct sockaddr *sa,
size_t *sa_len)
{
struct sockaddr_in6 *sin6;
struct sockaddr_in *sin;
if (strcmp(addrtype, "inet:ipv6-address") == 0) {
sin6 = (struct sockaddr_in6 *)sa;
*sa_len = sizeof(struct sockaddr_in6);
sin6->sin6_port = htons(port);
sin6->sin6_family = AF_INET6;
inet_pton(AF_INET6, addrstr, &sin6->sin6_addr);
}
else if (strcmp(addrtype, "inet:ipv4-address") == 0) {
sin = (struct sockaddr_in *)sa;
*sa_len = sizeof(struct sockaddr_in);
sin->sin_family = AF_INET;
sin->sin_port = htons(port);
sin->sin_addr.s_addr = inet_addr(addrstr);
}
else{
clicon_err(OE_XML, EINVAL, "Unexpected addrtype: %s", addrtype);
return -1;
}
return 0;
}
Reference in a new issue View git blame Copy permalink