#
# ***** BEGIN LICENSE BLOCK *****
# 
# Copyright (C) 2009-2019 Olof Hagsand and Benny Holmgren
#
# This file is part of CLIXON
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Alternatively, the contents of this file may be used under the terms of
# the GNU General Public License Version 3 or later (the "GPL"),
# in which case the provisions of the GPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of the GPL, and not to allow others to
# use your version of this file under the terms of Apache License version 2, 
# indicate your decision by deleting the provisions above and replace them with
# the notice and other provisions required by the GPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the Apache License version 2 or the GPL.
#
# ***** END LICENSE BLOCK *****
#
VPATH       	= @srcdir@
srcdir  	= @srcdir@
top_srcdir  	= @top_srcdir@
prefix 		= @prefix@
bindir 		= @bindir@
includedir	= @includedir@
datarootdir     = @datarootdir@
sysconfdir      = @sysconfdir@
datarootdir	= @datarootdir@
localstatedir   = @localstatedir@
libdir          = @exec_prefix@/lib

APPNAME	        = hello

# Here is where example yang appears
YANG_INSTALLDIR  = @YANG_INSTALLDIR@
# Install here if you want default clixon location:
CLIXON_DEFAULT_CONFIG = @CLIXON_DEFAULT_CONFIG@

CC		= @CC@
CFLAGS  	= @CFLAGS@ -fPIC 
INSTALLFLAGS  	= @INSTALLFLAGS@ 
with_restconf	= @with_restconf@

INCLUDES 	= -I$(includedir) @INCLUDES@ 
CPPFLAGS  	= @CPPFLAGS@ -fPIC

BE_PLUGIN       = $(APPNAME)_backend.so
CLI_PLUGIN      = $(APPNAME)_cli.so
NETCONF_PLUGIN  = $(APPNAME)_netconf.so
RESTCONF_PLUGIN = $(APPNAME)_restconf.so

PLUGINS = $(BE_PLUGIN) $(CLI_PLUGIN) $(NETCONF_PLUGIN)
ifeq ($(with_restconf),yes)
PLUGINS += $(RESTCONF_PLUGIN)
endif

.PHONY: all clean depend install 

all:	$(PLUGINS)

.SUFFIXES: .c .o

# implicit rule
.c.o:
	$(CC) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) -c $<

CLISPECS = $(APPNAME)_cli.cli

YANGSPECS	 = clixon-hello@2019-04-17.yang

# CLI frontend plugin (see also install rule)
#CLI_SRC  = $(APPNAME)_cli.c
CLI_OBJ  = $(CLI_SRC:%.c=%.o)
$(CLI_PLUGIN): $(CLI_OBJ)
	$(CC) -Wall -shared -o $@ -lc $^ 

# Backend plugin (see also install rule)
#BE_SRC   = $(APPNAME)_backend.c
BE_OBJ   = $(BE_SRC:%.c=%.o)
$(BE_PLUGIN): $(BE_OBJ)
	$(CC) -Wall -shared -o $@ -lc $<

# NETCONF frontend plugin (see also install rule)
#NETCONF_SRC  = $(APPNAME)_netconf.c
NETCONF_OBJ  = $(NETCONF_SRC:%.c=%.o)
$(NETCONF_PLUGIN): $(NETCONF_OBJ)
	$(CC) -Wall -shared -o $@ -lc $^

# See configure.ac for disabling restconf
# RESTCONF frontend plugin (see also install rule)
#RESTCONF_SRC  = $(APPNAME)_restconf.c
RESTCONF_OBJ  = $(RESTCONF_SRC:%.c=%.o)
$(RESTCONF_PLUGIN): $(RESTCONF_OBJ)
	$(CC) -Wall -shared -o $@ -lc $^ 

SRC     = $(BE_SRC) $(CLI_SRC) $(NETCONF_SRC)
SRC    +=  $(RESTCONF_SRC)

OBJS    = $(BE_OBJ) $(CLI_OBJ) $(NETCONF_OBJ)
OBJS   += $(RESTCONF_OBJ)

clean:
	rm -f $(PLUGINS) $(OBJS) 

distclean: clean
	rm -f Makefile *~ .depend

install: $(YANGSPECS) $(CLISPECS) $(PLUGINS) $(APPNAME).xml
	install -d -m 0755 $(dir $(DESTDIR)$(CLIXON_DEFAULT_CONFIG))
	install -m 0644 $(APPNAME).xml $(DESTDIR)$(CLIXON_DEFAULT_CONFIG)
	install -d -m 0755 $(DESTDIR)$(libdir)/$(APPNAME)
	install -d -m 0755 $(DESTDIR)$(libdir)/$(APPNAME)/clispec
	install -m 0644 $(CLISPECS) $(DESTDIR)$(libdir)/$(APPNAME)/clispec
	install -d -m 0755 $(DESTDIR)$(datarootdir)/$(APPNAME)/yang
	install -m 0644 $(YANGSPECS) $(DESTDIR)$(DESTDIR)$(YANG_INSTALLDIR)
	install -d -m 0755 $(DESTDIR)$(localstatedir)/$(APPNAME)

# Uncomment for installing config file in /usr/local/etc instead
#	install -d -m 0755 $(DESTDIR)$(sysconfdir)
#	install -m 0644 $(APPNAME).xml $(DESTDIR)$(sysconfdir)

# Uncomment for installing cli plugin (see CLI_SRC)
#	install -d -m 0755 $(DESTDIR)$(libdir)/$(APPNAME)/cli
#	install -m 0644 $(INSTALLFLAGS) $(CLI_PLUGIN) $(DESTDIR)$(libdir)/$(APPNAME)/cli

# Uncomment for installing backend plugin (see BE_SRC)
#	install -d -m 0755 $(DESTDIR)$(libdir)/$(APPNAME)/backend
#	install -m 0644 $(INSTALLFLAGS) $(BE_PLUGIN) $(DESTDIR)$(libdir)/$(APPNAME)/backend

# Uncomment for installing netconf plugin (see NETCONF_SRC)
#	install -d -m 0755 $(DESTDIR)$(libdir)/$(APPNAME)/netconf
#	install -m 0644 $(INSTALLFLAGS) $(NETCONF_PLUGIN) $(DESTDIR)$(libdir)/$(APPNAME)/netconf

# Uncomment for installing restconf plugin (see RESTCONF_SRC). The conditional is
# because it is an option to disable restconf
#ifeq ($(with_restconf),yes)
#	install -d -m 0755 $(DESTDIR)$(libdir)/$(APPNAME)/restconf
#	install -m 0644 $(INSTALLFLAGS) $(RESTCONF_PLUGIN) $(DESTDIR)$(libdir)/$(APPNAME)/restconf
#endif

uninstall: 
	rm -rf $(DESTDIR)$(CLIXON_DEFAULT_CONFIG)
	rm -rf $(DESTDIR)$(libdir)/$(APPNAME)
	rm -rf $(DESTDIR)$(localstatedir)/$(APPNAME)
	rm -rf $(DESTDIR)$(datarootdir)/$(APPNAME)


install-include:	

depend:
	$(CC) $(DEPENDFLAGS) $(INCLUDES) $(CFLAGS) -MM $(SRC) > .depend

#include .depend