#
# ***** BEGIN LICENSE BLOCK *****
# 
# Copyright (C) 2009-2018 Olof Hagsand and Benny Holmgren
#
# This file is part of CLIXON
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Alternatively, the contents of this file may be used under the terms of
# the GNU General Public License Version 3 or later (the "GPL"),
# in which case the provisions of the GPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of the GPL, and not to allow others to
# use your version of this file under the terms of Apache License version 2, 
# indicate your decision by deleting the provisions above and replace them with
# the notice and other provisions required by the GPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the Apache License version 2 or the GPL.
#
# ***** END LICENSE BLOCK *****
#
VPATH       	= @srcdir@
srcdir  	= @srcdir@
top_srcdir  	= @top_srcdir@
prefix 		= @prefix@
bindir 		= @bindir@
includedir	= @includedir@
datarootdir     = @datarootdir@

APPNAME	        = example
CC		= @CC@
CFLAGS  	= @CFLAGS@ -rdynamic -fPIC 

INCLUDES 	= -I$(includedir) @INCLUDES@ 

BE_PLUGIN       = $(APPNAME)_backend.so
BE2_PLUGIN      = $(APPNAME)_backend_secondary.so
CLI_PLUGIN      = $(APPNAME)_cli.so
NETCONF_PLUGIN  = $(APPNAME)_netconf.so
RESTCONF_PLUGIN = $(APPNAME)_restconf.so

PLUGINS = $(BE_PLUGIN) $(BE2_PLUGIN) $(CLI_PLUGIN) $(NETCONF_PLUGIN) $(RESTCONF_PLUGIN)

all:	$(PLUGINS)

# Note: clixon.mk has rules for clixon_DBSPECDIR, clixon_SYSCONFDIR, etc used below
-include $(DESTDIR)$(datarootdir)/clixon/clixon.mk

CLISPECS = $(APPNAME)_cli.cli

YANGSPECS	 = $(APPNAME).yang
YANGSPECS	+= ietf-yang-types@2013-07-15.yang
YANGSPECS	+= ietf-inet-types@2013-07-15.yang
YANGSPECS	+= ietf-interfaces@2014-05-08.yang
YANGSPECS	+= ietf-ip@2014-06-16.yang
YANGSPECS	+= ietf-routing@2014-10-26.yang
YANGSPECS	+= ietf-ipv4-unicast-routing@2014-10-26.yang
YANGSPECS	+= ietf-ipv6-unicast-routing@2014-10-26.yang
YANGSPECS	+= ietf-ipsec@2016-03-09.yang

# Backend plugin
BE_SRC   = $(APPNAME)_backend.c
BE_OBJ   = $(BE_SRC:%.c=%.o)
$(BE_PLUGIN): $(BE_OBJ)
	$(CC) -Wall -shared -o $@ -lc $<

# Secondary backend plugin
BE2_SRC  = $(APPNAME)_backend_secondary.c
BE2_OBJ  = $(BE2_SRC:%.c=%.o)
$(BE2_PLUGIN): $(BE2_OBJ)
	$(CC) -Wall -shared -o $@ -lc $<

# CLI frontend plugin
CLI_SRC  = $(APPNAME)_cli.c
CLI_OBJ  = $(CLI_SRC:%.c=%.o)
$(CLI_PLUGIN): $(CLI_OBJ)
	$(CC) -Wall -shared -o $@ -lc $^ 

# NETCONF frontend plugin
NETCONF_SRC  = $(APPNAME)_netconf.c
NETCONF_OBJ  = $(NETCONF_SRC:%.c=%.o)
$(NETCONF_PLUGIN): $(NETCONF_OBJ)
	$(CC) -Wall -shared -o $@ -lc $^

# RESTCONF frontend plugin
RESTCONF_SRC  = $(APPNAME)_restconf.c
RESTCONF_OBJ  = $(RESTCONF_SRC:%.c=%.o)
$(RESTCONF_PLUGIN): $(RESTCONF_OBJ)
	$(CC) -Wall -shared -o $@ -lc $^ 

SRC     = $(BE_SRC) $(BE2_SRC) $(CLI_SRC) $(NETCONF_SRC) $(RESTCONF_SRC)
OBJS    = $(BE_OBJ) $(BE2_OBJ) $(CLI_OBJ) $(NETCONF_OBJ) $(RESTCONF_OBJ)

clean:
	rm -f $(PLUGINS) $(OBJS) 
	(cd docker && $(MAKE) $(MFLAGS) $@)

distclean: clean
	rm -f Makefile *~ .depend
	(cd docker && $(MAKE) $(MFLAGS) $@)

install: $(YANGSPECS) $(CLISPECS) $(BE_PLUGIN) $(BE2_PLUGIN) $(CLI_PLUGIN) $(NETCONF_PLUGIN) $(RESTCONF_PLUGIN) $(APPNAME).xml
	install -d $(DESTDIR)$(clixon_SYSCONFDIR)
	install $(APPNAME).xml $(DESTDIR)$(clixon_SYSCONFDIR)
	install -d $(DESTDIR)$(clixon_DBSPECDIR)/yang
	install $(YANGSPECS) $(DESTDIR)$(clixon_DBSPECDIR)/yang
	install -d $(DESTDIR)$(clixon_LIBDIR)/cli
	install $(CLI_PLUGIN) $(DESTDIR)$(clixon_LIBDIR)/cli; 
	install -d $(DESTDIR)$(clixon_LIBDIR)/backend
	install $(BE_PLUGIN) $(BE2_PLUGIN) $(DESTDIR)$(clixon_LIBDIR)/backend; 
	install -d $(DESTDIR)$(clixon_LIBDIR)/netconf
	install $(NETCONF_PLUGIN) $(DESTDIR)$(clixon_LIBDIR)/netconf;
	install -d $(DESTDIR)$(clixon_LIBDIR)/restconf
	install $(RESTCONF_PLUGIN) $(DESTDIR)$(clixon_LIBDIR)/restconf; 
	install -d $(DESTDIR)$(clixon_LIBDIR)/clispec
	install $(CLISPECS) $(DESTDIR)$(clixon_LIBDIR)/clispec; 
	install -d $(DESTDIR)$(clixon_LOCALSTATEDIR)
	(cd docker && $(MAKE) $(MFLAGS) $@)

uninstall: 
	rm -rf $(DESTDIR)$(clixon_SYSCONFDIR)/$(APPNAME).xml
	rm -rf $(DESTDIR)$(clixon_DBSPECDIR)
	rm -rf $(DESTDIR)$(clixon_LOCALSTATEDIR)
	rm -rf $(DESTDIR)$(clixon_LIBDIR)
	(cd docker && $(MAKE) $(MFLAGS) $@)

install-include:	

depend:
	$(CC) $(DEPENDFLAGS) $(INCLUDES) $(CFLAGS) -MM $(SRC) > .depend
	(cd docker && $(MAKE) $(MFLAGS) $@)

#include .depend