#!/usr/bin/env bash
# Restconf direct start/stop using RPC and config enable flag (as alternative to systemd or other)
# According to the following behaviour:
# - on RPC start, if enable is true, start the service, if false, error or ignore it
# - on RPC stop, stop the service 
# - on backend start make the state as configured
# - on enable change, make the state as configured
# - No restconf config means enable: false (extra rule)
# See test_restconf_netns for network namespaces
# See test_restconf_internal_cases for some special use-cases
# XXX Lots of sleeps to remove race conditions. I am sure there are others way to fix this

# Magic line must be first in script (see README.md)
s="$_" ; . ./lib.sh || if [ "$s" = $0 ]; then exit 0; else return 0; fi

APPNAME=example

cfg=$dir/conf.xml
startupdb=$dir/startup_db

# Restconf debug
RESTCONFDBG=$DBG
RCPROTO=http # no ssl here

if [ "${WITH_RESTCONF}" = "fcgi" ]; then
    EXTRACONF="<CLICON_FEATURE>clixon-restconf:fcgi</CLICON_FEATURE>"
else
    EXTRACONF=""
fi
cat <<EOF > $cfg
<clixon-config $CONFNS>
  <CLICON_CONFIGFILE>$cfg</CLICON_CONFIGFILE>
  <CLICON_FEATURE>ietf-netconf:startup</CLICON_FEATURE>
  <CLICON_FEATURE>clixon-restconf:allow-auth-none</CLICON_FEATURE> <!-- Use auth-type=none -->
  $EXTRACONF
  <CLICON_YANG_DIR>/usr/local/share/clixon</CLICON_YANG_DIR>
  <CLICON_YANG_DIR>$IETFRFC</CLICON_YANG_DIR>
  <CLICON_YANG_MAIN_DIR>$dir</CLICON_YANG_MAIN_DIR>
  <CLICON_CLISPEC_DIR>/usr/local/lib/$APPNAME/clispec</CLICON_CLISPEC_DIR>
  <CLICON_BACKEND_DIR>/usr/local/lib/$APPNAME/backend</CLICON_BACKEND_DIR>
  <CLICON_BACKEND_REGEXP>example_backend.so$</CLICON_BACKEND_REGEXP>
  <CLICON_RESTCONF_DIR>/usr/local/lib/$APPNAME/restconf</CLICON_RESTCONF_DIR>
  <CLICON_CLI_DIR>/usr/local/lib/$APPNAME/cli</CLICON_CLI_DIR>
  <CLICON_CLI_MODE>$APPNAME</CLICON_CLI_MODE>
  <CLICON_SOCK>/usr/local/var/$APPNAME/$APPNAME.sock</CLICON_SOCK>
  <CLICON_BACKEND_PIDFILE>/usr/local/var/$APPNAME/$APPNAME.pidfile</CLICON_BACKEND_PIDFILE>
  <CLICON_XMLDB_DIR>$dir</CLICON_XMLDB_DIR>
  <CLICON_MODULE_LIBRARY_RFC7895>true</CLICON_MODULE_LIBRARY_RFC7895>
  <!-- start restconf from backend -->
  <CLICON_BACKEND_RESTCONF_PROCESS>true</CLICON_BACKEND_RESTCONF_PROCESS>
</clixon-config>
EOF

cat <<EOF > $dir/example.yang
module example {
   namespace "urn:example:clixon";
   prefix ex;
   revision 2021-03-05;
   leaf val{
      type string;
   }
}
EOF

# Subroutine send a process control RPC and tricks to echo process-id returned
# Args, expected values of:
# 0: ACTIVE: true or false
# 1: STATUS: stopped/running/exiting
# retvalue:
# $pid
function rpcstatus()
{
    if [ $# -ne 2 ]; then
	err1 "rpcstatus: # arguments: 2" "$#"
    fi
    active=$1
    status=$2
    
    sleep $DEMSLEEP
    new "send rpc status"
    ret=$($clixon_netconf -qf $cfg<<EOF
$DEFAULTHELLO
<rpc $DEFAULTNS>
  <process-control $LIBNS>
    <name>restconf</name>
    <operation>status</operation>
  </process-control>
</rpc>]]>]]>
EOF
)
    # Check pid
    expect="<pid $LIBNS>[0-9]*</pid>"
    match=$(echo "$ret" | grep --null -Go "$expect")
    if [ -z "$match" ]; then
	pid=0
    else
	pid=$(echo "$match" | awk -F'[<>]' '{print $3}')
    fi
    if [ -z "$pid" ]; then
	err "No pid return value" "$ret"
    fi
    if $active; then
	expect="^<rpc-reply $DEFAULTNS><active $LIBNS>$active</active><description $LIBNS>Clixon RESTCONF process</description><command $LIBNS>/www-data/clixon_restconf -f $cfg -D [0-9]</command><status $LIBNS>$status</status><starttime $LIBNS>20[0-9][0-9]\-[0-9][0-9]\-[0-9][0-9]T[0-9][0-9]:[0-9][0-9]:[0-9][0-9]\.[0-9]*Z</starttime><pid $LIBNS>$pid</pid></rpc-reply>]]>]]>$"
    else
	# inactive, no startime or pid
	expect="^<rpc-reply $DEFAULTNS><active $LIBNS>$active</active><description $LIBNS>Clixon RESTCONF process</description><command $LIBNS>/www-data/clixon_restconf -f $cfg -D [0-9]</command><status $LIBNS>$status</status></rpc-reply>]]>]]>$"
    fi
    match=$(echo "$ret" | grep --null -Go "$expect")
    if [ -z "$match" ]; then
	err "$expect" "$ret"
    fi
}

# Subroutine send a process control RPC and tricks to echo process-id returned
# Args:
# 1: operation   One of stop/start/restart
function rpcoperation()
{
    operation=$1
    
    sleep $DEMSLEEP
    new "send rpc $operation"
    expecteof "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO<rpc $DEFAULTNS><process-control $LIBNS><name>restconf</name><operation>$operation</operation></process-control></rpc>]]>]]>" "^<rpc-reply $DEFAULTNS><ok $LIBNS/></rpc-reply>]]>]]>$"

    sleep $DEMSLEEP
}

# This test is confusing:
# The whole restconf config is in clixon-config wich binds 0.0.0.0:80 which will be the only
# config the restconf daemon ever reads.
# However, enable (and debug) flag is stored in running db but only backend will ever read that.
# It just controls how restconf is started, but thereafter the restconf daemon reads the static db in clixon-config file

new "ENABLE true"
# First basic operation with restconf enable is true
cat<<EOF > $startupdb
<${DATASTORE_TOP}>
   <restconf xmlns="http://clicon.org/restconf">
      <enable>true</enable>
      <auth-type>none</auth-type>
      <pretty>false</pretty>
      <debug>$RESTCONFDBG</debug>
      <socket>
         <namespace>default</namespace>
	 <address>0.0.0.0</address>
	 <port>80</port>
	 <ssl>false</ssl>
      </socket>
   </restconf>
</${DATASTORE_TOP}>
EOF

new "kill old restconf"
stop_restconf_pre

new "test params: -f $cfg"
if [ $BE -ne 0 ]; then
    new "kill old backend"
    sudo clixon_backend -z -f $cfg
    if [ $? -ne 0 ]; then
	err
    fi

    new "start backend -s startup -f $cfg"
    start_backend -s startup -f $cfg
fi

new "wait backend"
wait_backend

# For debug
#>&2 echo "curl $CURLOPTS -X POST -H \"Content-Type: application/yang-data+json\" $RCPROTO://localhost/restconf/operations/clixon-lib:process-control -d '{\"clixon-lib:input\":{\"name\":\"restconf\",\"operation\":\"status\"}}'"

# Get pid of running process and check return xml
new "1. Get rpc status"
rpcstatus true running 
pid0=$pid # Save pid0
if [ $pid0 -eq 0 ]; then err "Pid" 0; fi

new "check restconf process runnng using ps pid:$pid0"
ps=$(ps -hp $pid0) 

if [ -z "$ps" ]; then
    err "Restconf $pid0 not found"
fi

new "check parent process of pid:$pid0"
ppid=$(ps -o ppid= -p $pid0)
if [ "$ppid" -eq 1 -o "$ppid" -eq "$pid0" ]; then
    err "Restconf parent pid of $pid0 is $ppid is wrong"
fi

new "wait restconf"
wait_restconf

new "try restconf rpc status"
expectpart "$(curl $CURLOPTS -X POST -H "Content-Type: application/yang-data+json" $RCPROTO://localhost/restconf/operations/clixon-lib:process-control -d '{"clixon-lib:input":{"name":"restconf","operation":"status"}}')" 0 "HTTP/1.1 200 OK" '{"clixon-lib:output":' '"active":' '"pid":'

new "2. Get status"
rpcstatus true running
pid1=$pid
if [ $pid1 -eq 0 ]; then err "pid" 0; fi

new "Check same pid"
if [ "$pid0" -ne "$pid1" ]; then
    err "$pid0" "$pid1"
fi

new "try restconf rpc restart"
expectpart "$(curl $CURLOPTS -X POST -H "Content-Type: application/yang-data+json" $RCPROTO://localhost/restconf/operations/clixon-lib:process-control -d '{"clixon-lib:input":{"name":"restconf","operation":"restart"}}')" 0 "HTTP/1.1 204 No Content"

new "3. Get status"
rpcstatus true running
pid1=$pid
if [ $pid1 -eq 0 ]; then err "Pid" 0; fi

new "check different pids"
if [ "$pid0" -eq "$pid1" ]; then
    err1 "not $pid0" "$pid1"
fi

new "4. stop restconf RPC"
rpcoperation stop
if [ $? -ne 0 ]; then exit -1; fi

new "Wait for restrconf to stop"
wait_restconf_stopped

new "5. Get rpc status stopped"
rpcstatus false stopped
if [ $pid -ne 0 ]; then err "Pid" "$pid"; fi

new "6. Start rpc again"
rpcoperation start
if [ $? -ne 0 ]; then exit -1; fi

new "7. Get rpc status"
rpcstatus true running
pid3=$pid
if [ $pid3 -eq 0 ]; then err "Pid" 0; fi

new "check restconf process running using ps"
ps=$(ps -hp $pid3)
if [ -z "$ps" ]; then
    err "A restconf running"
fi

if [ $pid0 -eq $pid3 ]; then
    err1 "A different pid" "same pid: $pid3"
fi

new "kill restconf"
stop_restconf_pre

new "8. start restconf RPC"
rpcoperation start
if [ $? -ne 0 ]; then exit -1; fi

new "9. check status RPC on"
rpcstatus true running
pid5=$pid
if [ $pid5 -eq 0 ]; then err "Pid" 0; fi

new "10. restart restconf RPC"
rpcoperation restart
if [ $? -ne 0 ]; then exit -1; fi

new "11. Get restconf status rpc"
rpcstatus true running
pid7=$pid
if [ $pid7 -eq 0 ]; then err "Pid" 0; fi

if [ $pid5 -eq $pid7 ]; then
    err1 "A different pid" "samepid: $pid7"
fi

if [ $BE -ne 0 ]; then
    new "Kill backend"
    # Check if premature kill
    pid=$(pgrep -u root -f clixon_backend)
    if [ -z "$pid" ]; then
	err "backend already dead"
    fi
    # kill backend
    stop_backend -f $cfg
fi

# Restconf is enabled and restconf was running but was killed by stop ^.
# Start backend with -s none should start restconf too via ca_reset rule

new "Restart backend -s none"

if [ $BE -ne 0 ]; then
    new "kill old backend"
    sudo clixon_backend -z -f $cfg
    if [ $? -ne 0 ]; then
	err
    fi
    new "start backend -s none -f $cfg"
    start_backend -s none -f $cfg

    new "wait backend"
    wait_backend
fi

new "wait restconf"
wait_restconf

if  [ $valgrindtest -ne 2 ]; then # Restart with same restconf pid does not work w backend valgrind test
    new "12. Get restconf (running) after restart"
    rpcstatus true running
    if [ $pid -eq 0 ]; then err "Pid" 0; fi
fi

if [ $BE -ne 0 ]; then
    new "Kill backend"
    # Check if premature kill
    pid=$(pgrep -u root -f clixon_backend)
    if [ -z "$pid" ]; then
	err "backend already dead"
    fi
    # kill backend
    stop_backend -f $cfg
fi
#--------------------------

# Now start with enable=false

new "enable false"
# Second basic operation with restconf enable is false
cat<<EOF > $startupdb
<${DATASTORE_TOP}>
   <restconf xmlns="http://clicon.org/restconf">
      <enable>false</enable>
      <auth-type>none</auth-type>
      <pretty>false</pretty>
      <debug>$RESTCONFDBG</debug>
      <socket>
         <namespace>default</namespace>
	 <address>0.0.0.0</address>
	 <port>80</port>
	 <ssl>false</ssl>
      </socket>
   </restconf>
</${DATASTORE_TOP}>
EOF

new "kill old restconf"
stop_restconf_pre

new "test params: -f $cfg"
if [ $BE -ne 0 ]; then
    new "kill old backend"
    sudo clixon_backend -z -f $cfg
    if [ $? -ne 0 ]; then
	err
    fi
    new "start backend -s startup -f $cfg"
    start_backend -s startup -f $cfg
fi

new "wait backend"
wait_backend

new "13. check status RPC off"
rpcstatus false stopped
if [ $pid -ne 0 ]; then err "Pid" "$pid"; fi

new "14. start restconf RPC (but disabled)"
rpcoperation start
if [ $? -ne 0 ]; then exit -1; fi

new "15. check status RPC still off"
rpcstatus false stopped
if [ $pid -ne 0 ]; then err "Pid" "$pid"; fi

new "Enable restconf"
expecteof "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO<rpc $DEFAULTNS><edit-config><default-operation>merge</default-operation><target><candidate/></target><config><restconf xmlns=\"http://clicon.org/restconf\"><enable>true</enable><debug>$RESTCONFDBG</debug></restconf></config></edit-config></rpc>]]>]]>" "^<rpc-reply $DEFAULTNS><ok/></rpc-reply>]]>]]>$"

new "commit enable"
expecteof "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO<rpc $DEFAULTNS><commit/></rpc>]]>]]>" "^<rpc-reply $DEFAULTNS><ok/></rpc-reply>]]>]]>$"

new "16. check status RPC on"
rpcstatus true running
pid1=$pid
if [ $pid1 -eq 0 ]; then err "Pid" 0; fi

new "wait restconf"
wait_restconf

# Edit a field, eg pretty to trigger a restart
new "Edit a restconf field via restconf" # XXX fcgi fails here
expectpart "$(curl $CURLOPTS -X PUT -H "Content-Type: application/yang-data+json" $RCPROTO://localhost/restconf/data/clixon-restconf:restconf/pretty -d '{"clixon-restconf:pretty":true}' )" 0 "HTTP/1.1 204 No Content"

new "check status RPC new pid"
rpcstatus true running
pid2=$pid
if [ $pid2 -eq 0 ]; then err "Pid" 0; fi

if [ $pid1 -eq $pid2 ]; then
    err1 "A different pid" "$pid1"
fi

new "wait restconf"
wait_restconf

new "Edit a non-restconf field via restconf"
expectpart "$(curl $CURLOPTS -X POST -H "Content-Type: application/yang-data+json" $RCPROTO://localhost/restconf/data -d '{"example:val":"xyz"}' )" 0 "HTTP/1.1 201 Created"

new "17. check status RPC same pid"
rpcstatus true running
pid3=$pid
if [ $pid3 -eq 0 ]; then err "Pid" 0; fi

if [ $pid2 -ne $pid3 ]; then
    err1 "Same pid $pid2" "$pid3"
fi

new "Disable restconf"
expecteof "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO<rpc $DEFAULTNS><edit-config><default-operation>merge</default-operation><target><candidate/></target><config><restconf xmlns=\"http://clicon.org/restconf\"><enable>false</enable></restconf></config></edit-config></rpc>]]>]]>" "^<rpc-reply $DEFAULTNS><ok/></rpc-reply>]]>]]>$"

new "commit disable"
expecteof "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO<rpc $DEFAULTNS><commit/></rpc>]]>]]>" "^<rpc-reply $DEFAULTNS><ok/></rpc-reply>]]>]]>$"

new "17. check status RPC off"
rpcstatus false stopped
if [ $pid -ne 0 ]; then err "Pid" "$pid"; fi

# Negative validation checks of clixon-restconf / socket

new "netconf edit config invalid ssl"
expecteof "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO<rpc $DEFAULTNS><edit-config><target><candidate/></target><config><restconf xmlns=\"http://clicon.org/restconf\" nc:operation=\"replace\" xmlns:nc=\"urn:ietf:params:xml:ns:netconf:base:1.0\"><enable>true</enable><socket><namespace>default</namespace><address>0.0.0.0</address><port>80</port><ssl>true</ssl></socket></restconf></config></edit-config></rpc>]]>]]>" "^<rpc-reply $DEFAULTNS><ok/></rpc-reply>]]>]]>$"

new "netconf validate should fail"
expecteof "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO<rpc $DEFAULTNS><validate><source><candidate/></source></validate></rpc>]]>]]>" "^<rpc-reply $DEFAULTNS><rpc-error><error-type>application</error-type><error-tag>operation-failed</error-tag><error-severity>error</error-severity><error-message>SSL enabled but server-cert-path not set</error-message></rpc-error></rpc-reply>]]>]]>$"

# stop backend
if [ $BE -ne 0 ]; then
    new "Kill backend"
    # Check if premature kill
    pid=$(pgrep -u root -f clixon_backend)
    if [ -z "$pid" ]; then
	err "backend already dead"
    fi
    # kill backend
    stop_backend -f $cfg
fi

#Start backend -s none should start 

unset pid
sleep $DEMSLEEP # Lots of processes need to die before next test

new "endtest"
endtest

# Set by restconf_config
unset RESTCONFIG
unset RESTCONFDBG
unset RCPROTO

rm -rf $dir