CLIXON-TYPES-MIB DEFINITIONS ::= BEGIN -- -- Example MIB objects for agent module example implementations -- IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, TimeTicks, Counter32, Gauge32, Counter64, NOTIFICATION-TYPE, IpAddress FROM SNMPv2-SMI SnmpAdminString FROM SNMP-FRAMEWORK-MIB netSnmp FROM NET-SNMP-MIB TruthValue, TimeStamp, RowStatus, StorageType FROM SNMPv2-TC InetAddressType, InetAddress FROM INET-ADDRESS-MIB IANAifType FROM IANAifType-MIB ; clixonExamples MODULE-IDENTITY LAST-UPDATED "200406150000Z" ORGANIZATION "www.net-snmp.org" CONTACT-INFO "postal: Wes Hardaker P.O. Box 382 Davis CA 95617 email: net-snmp-coders@lists.sourceforge.net" DESCRIPTION "Example MIB objects for agent module example implementations" REVISION "200406150000Z" DESCRIPTION "Corrected notification example definitions" REVISION "200202060000Z" DESCRIPTION "First draft" ::= { netSnmp 200 } -- -- top level structure -- clixonExampleScalars OBJECT IDENTIFIER ::= { clixonExamples 1 } clixonExampleTables OBJECT IDENTIFIER ::= { clixonExamples 2 } clixonExampleNotifications OBJECT IDENTIFIER ::= { clixonExamples 3 } clixonTables OBJECT IDENTIFIER ::= { clixonExamples 4 } clixonInetTables OBJECT IDENTIFIER ::= { clixonExamples 5 } clixonExampleNotificationPrefix OBJECT IDENTIFIER ::= { clixonExampleNotifications 0 } clixonExampleNotificationObjects OBJECT IDENTIFIER ::= { clixonExampleNotifications 2 } -- clixonTutorial OBJECT IDENTIFIER ::= { clixonExamples 4 } -- -- Example scalars -- clixonExampleInteger OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This is a simple object which merely houses a writable integer. It's only purposes is to hold the value of a single integer. Writing to it will simply change the value for subsequent GET/GETNEXT/GETBULK retrievals. This example object is implemented in the agent/mibgroup/examples/scalar_int.c file." DEFVAL { 42 } ::= { clixonExampleScalars 1 } clixonExampleSleeper OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This is a simple object which is a basic integer. It's value indicates the number of seconds that the agent will take in responding to requests of this object. This is implemented in a way which will allow the agent to keep responding to other requests while access to this object is blocked. It is writable, and changing it's value will change the amount of time the agent will effectively wait for before returning a response when this object is manipulated. Note that SET requests through this object will take longer, since the delay is applied to each internal transaction phase, which could result in delays of up to 4 times the value of this object. This example object is implemented in the agent/mibgroup/examples/delayed_instance.c file." DEFVAL { 1 } ::= { clixonExampleScalars 2 } clixonExampleString OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "This is a simple object which merely houses a writable string. It's only purposes is to hold the value of a single string. Writing to it will simply change the value for subsequent GET/GETNEXT/GETBULK retrievals. This example object is implemented in the agent/mibgroup/examples/watched.c file." DEFVAL { "So long, and thanks for all the fish!" } ::= { clixonExampleScalars 3 } ifTableLastChange OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the last creation or deletion of an entry in the ifTable. If the number of entries has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { clixonExampleScalars 4 } ifType OBJECT-TYPE SYNTAX IANAifType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifType textual convention." ::= { clixonExampleScalars 5 } ifSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295) and ifHighSpeed must be used to report the interace's speed. For a sub-layer which has no concept of bandwidth, this object should be zero." ::= { clixonExampleScalars 6 } ifAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2), testing(3) -- in some test mode } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with ifAdminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, ifAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state)." ::= { clixonExampleScalars 7} ifInOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { clixonExampleScalars 8} ifHCInOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." ::= { clixonExampleScalars 9} ifPromiscuousMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when the station accepts all packets/frames transmitted on the media. The value true(1) is only legal on certain types of media. If legal, setting this object to a value of true(1) may require the interface to be reset before becoming effective. The value of ifPromiscuousMode does not affect the reception of broadcast and multicast packets/frames by the interface." ::= { clixonExampleScalars 10 } ifCounterDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime on the most recent occasion at which any one or more of this interface's counters suffered a discontinuity. The relevant counters are the specific instances associated with this interface of any Counter32 or Counter64 object contained in the ifTable or ifXTable. If no such discontinuities have occurred since the last re- initialization of the local management subsystem, then this object contains a zero value." ::= { clixonExampleScalars 11 } ifStackStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the relationship between two sub-layers. Changing the value of this object from 'active' to 'notInService' or 'destroy' will likely have consequences up and down the interface stack. Thus, write access to this object is likely to be inappropriate for some types of interfaces, and many implementations will choose not to support write-access for any type of interface." ::= { clixonExampleScalars 12 } ifIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address example." ::= { clixonExampleScalars 13 } bitTest OBJECT-TYPE SYNTAX BITS { bit00 (0), bit01 (1), bit02 (2), bit03 (3), bit04 (4), bit05 (5), bit06 (6), bit07 (7), bit08 (8), bit09 (9), bit10 (10), bit11 (11), bit12 (12), bit13 (13), bit14 (14), bit15 (15), bit16 (16), bit17 (17), bit18 (18), bit19 (19), bit20 (20), bit21 (21), bit22 (22), bit23 (23), bit24 (24), bit25 (25), bit26 (26), bit27 (27), bit28 (28), bit29 (29), bit30 (30), bit31 (31), bit32 (32), bit33 (33), bit34 (34), bit35 (35) } MAX-ACCESS read-write STATUS current DESCRIPTION "Simple bits value used for testing." ::= { clixonExampleScalars 14 } -- -- Example Tables -- clixonIETFWGTable OBJECT-TYPE SYNTAX SEQUENCE OF ClixonIETFWGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table merely contains a set of data which is otherwise useless for true network management. It is a table which describes properies about a IETF Working Group, such as the names of the two working group chairs. This example table is implemented in the agent/mibgroup/examples/data_set.c file." ::= { clixonExampleTables 1 } clixonIETFWGEntry OBJECT-TYPE SYNTAX ClixonIETFWGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row describing a given working group" INDEX { nsIETFWGName } ::= {clixonIETFWGTable 1 } ClixonIETFWGEntry ::= SEQUENCE { nsIETFWGName INTEGER, nsIETFWGChair1 OCTET STRING, nsIETFWGChair2 OCTET STRING } nsIETFWGName OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the IETF Working Group this table describes." ::= { clixonIETFWGEntry 1 } nsIETFWGChair1 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "One of the names of the chairs for the IETF working group." ::= { clixonIETFWGEntry 2 } nsIETFWGChair2 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The other name, if one exists, of the chairs for the IETF working group." ::= { clixonIETFWGEntry 3 } clixonTable OBJECT-TYPE SYNTAX SEQUENCE OF ClixonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table merely contains a set of data which is otherwise useless for true network management. It is a table which describes properies about a IETF Working Group, such as the names of the two working group chairs. This example table is implemented in the agent/mibgroup/examples/data_set.c file." ::= { clixonTables 1 } clixonEntry OBJECT-TYPE SYNTAX ClixonEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row describing a given working group" INDEX { nsName } ::= {clixonTable 1 } ClixonEntry ::= SEQUENCE { nsName INTEGER, nsChair1 OCTET STRING, nsChair2 OCTET STRING } nsName OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the IETF Working Group this table describes." ::= { clixonEntry 1 } nsChair1 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "One of the names of the chairs for the IETF working group." ::= { clixonEntry 2 } nsChair2 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The other name, if one exists, of the chairs for the IETF working group." ::= { clixonEntry 3 } -- -- A table used in a table_iterator example -- (agent/mibgroup/examples/clixonHostsTable*.[ch]) -- clixonHostsTable OBJECT-TYPE SYNTAX SEQUENCE OF ClixonHostsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An example table that implements a wrapper around the /etc/hosts file on a machine using the iterator helper API." ::= { clixonExampleTables 2 } clixonHostsEntry OBJECT-TYPE SYNTAX ClixonHostsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A host name mapped to an ip address" INDEX { clixonHostName } ::= { clixonHostsTable 1 } ClixonHostsEntry ::= SEQUENCE { clixonHostName OCTET STRING, clixonHostAddressType InetAddressType, clixonHostAddress InetAddress, clixonHostStorage StorageType, clixonHostRowStatus RowStatus } clixonHostName OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A host name that exists in the /etc/hosts (unix) file." ::= { clixonHostsEntry 1 } clixonHostAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The address type of then given host." ::= { clixonHostsEntry 2 } clixonHostAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of then given host." ::= { clixonHostsEntry 3 } clixonHostStorage OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row." DEFVAL { nonVolatile } ::= { clixonHostsEntry 4 } clixonHostRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row." ::= { clixonHostsEntry 5 } clixonObjectID OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining `what kind of box' is being managed. For example, if vendor `Flintstones, Inc.' was assigned the subtree 1.3.6.1.4.1.424242, it could assign the identifier 1.3.6.1.4.1.424242.1.1 to its `Fred Router'." ::= { netSnmp 3 } clixonInetTable OBJECT-TYPE SYNTAX SEQUENCE OF ClixonInetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table merely contains a set of data which is otherwise useless for true network management. It is a table which describes properies about a IETF Working Group, such as the names of the two working group chairs. This example table is implemented in the agent/mibgroup/examples/data_set.c file." ::= { clixonExampleTables 3 } clixonInetEntry OBJECT-TYPE SYNTAX ClixonInetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row describing a given working group" INDEX { clixonAddress } ::= {clixonInetTable 1 } ClixonInetEntry ::= SEQUENCE { clixonAddress InetAddress, clixonString OCTET STRING } clixonAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the IETF Working Group this table describes." ::= { clixonInetEntry 2 } clixonString OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "One of the names of the chairs for the IETF working group." ::= { clixonInetEntry 3 } END