- Restconf native: Fixed ssl/non-ssl read/write behaviour for data that is different in freebsd than in linux

- test: removed sed -i in tests since it is not portable between linux and bsd

apps/restconf/restconf_main_native.c

@@ -679,6 +679,8 @@ restconf_connection(int   s,
     ssize_t               n;
     char                  buf[BUFSIZ]; /* from stdio.h, typically 8K XXX: reduce for test */
     int                   readmore = 1;
+    int                   sslerr;
+
 #ifdef HAVE_LIBEVHTP
     clicon_handle         h;
     evhtp_connection_t   *evconn = NULL;
@@ -700,21 +702,47 @@ restconf_connection(int   s,
 	       curl -Ssik --key /var/tmp/./test_restconf_ssl_certs.sh/certs/limited.key --cert /var/tmp/./test_restconf_ssl_certs.sh/certs/limited.crt -X GET https://localhost/restconf/data/example:x
 	    */
 	    if ((n = SSL_read(rc->rc_ssl, buf, sizeof(buf))) < 0){
-		clicon_err(OE_XML, errno, "SSL_read");
+		sslerr = SSL_get_error(rc->rc_ssl, n);
-		goto done;
+		clicon_debug(1, "%s SSL_read() n:%ld errno:%d sslerr:%d", __FUNCTION__, n, errno, sslerr);
+		switch (sslerr){
+		case SSL_ERROR_WANT_READ:            /* 2 */
+		    /* SSL_ERROR_WANT_READ is returned when the last operation was a read operation 
+		     * from a nonblocking BIO. 
+		     * That is, it can happen if restconf_socket_init() below is called 
+		     * with SOCK_NONBLOCK
+		     */
+		    clicon_debug(1, "%s SSL_read SSL_ERROR_WANT_READ", __FUNCTION__);
+		    usleep(1000);
+		    readmore = 1;
+		    break;
+		default:
+		    clicon_err(OE_XML, errno, "SSL_read");
+		    goto done;              
+		} /* switch */
+		continue; /* readmore */
 	    }
 	}
 	else{
 	    if ((n = read(rc->rc_s, buf, sizeof(buf))) < 0){ /* XXX atomicio ? */
-		if (errno == ECONNRESET) {/* Connection reset by peer */
+		switch(errno){
+		case ECONNRESET:/* Connection reset by peer */
 		    clicon_debug(1, "%s %d Connection reset by peer", __FUNCTION__, rc->rc_s);
 		    clixon_event_unreg_fd(rc->rc_s, restconf_connection);
 		    close(rc->rc_s);
 		    restconf_conn_free(rc);
 		    goto ok; /* Close socket and ssl */
+		    break;
+		case EAGAIN:
+		    clicon_debug(1, "%s read EAGAIN", __FUNCTION__);
+		    usleep(1000);
+		    readmore = 1;
+		    break;
+		default:;
+		    clicon_err(OE_XML, errno, "read");
+		    goto done;
+		    break;
 		}
-		clicon_err(OE_XML, errno, "read");
+		continue;
-		goto done;
 	    }
 	}
 	clicon_debug(1, "%s read:%ld", __FUNCTION__, n);

apps/restconf/restconf_nghttp2.c

@@ -182,6 +182,7 @@ session_send_callback(nghttp2_session *session,
     ssize_t        totlen = 0;
     int            s;
     SSL           *ssl; 
+    int            sslerr;
     
     clicon_debug(1, "%s buflen:%lu", __FUNCTION__, buflen);
     s = rc->rc_s;
@@ -190,7 +191,14 @@ session_send_callback(nghttp2_session *session,
 	if (ssl){
 	    if ((len = SSL_write(ssl, buf+totlen, buflen-totlen)) <= 0){
 		er = errno;
-		switch (SSL_get_error(ssl, len)){
+		sslerr = SSL_get_error(ssl, len);
+		clicon_debug(1, "%s errno:;%d sslerr:%d", __FUNCTION__, errno, sslerr);
+		switch (sslerr){
+		case SSL_ERROR_WANT_WRITE:           /* 3 */
+		    clicon_debug(1, "%s write SSL_ERROR_WANT_WRITE", __FUNCTION__);
+		    usleep(1000);
+		    continue;
+		    break;
 		case SSL_ERROR_SYSCALL:              /* 5 */
 		    if (er == ECONNRESET) {/* Connection reset by peer */
 			if (ssl)
@@ -200,8 +208,12 @@ session_send_callback(nghttp2_session *session,
 			goto ok; /* Close socket and ssl */
 		    }
 		    else if (er == EAGAIN){
+			/* same as want_write above, but different behaviour on different 
+			 * platforms, linux here, freebsd want_write, or possibly differnt
+			 * ssl lib versions?
+			 */
 			clicon_debug(1, "%s write EAGAIN", __FUNCTION__);
-			usleep(10000);
+			usleep(1000);
 			continue;
 		    }
 		    else{

test/test_debug.sh

@@ -105,6 +105,9 @@ expectpart "$($clixon_cli -1 -f $cfg -l o debug restconf 1)" 0 "^$"
 new "get and put config using restconf"
 expectpart "$(curl $CURLOPTS -H "Accept: application/yang-data+xml" -X GET $RCPROTO://localhost/restconf/data?content=config --next $CURLOPTS -H "Content-Type: application/yang-data+json" -X POST $RCPROTO://localhost/restconf/data -d '{"example:table":{"parameter":{"name":"local0","value":"foo"}}}')" 0 "HTTP/$HVER 200" '<data>' "HTTP/$HVER 201"
 
+# In freebsd, backend dies in stop_restconf below unless sleep
+sleep $DEMSLEEP 
+
 if [ $RC -ne 0 ]; then
     new "Kill restconf daemon"
     stop_restconf 
@@ -115,7 +118,7 @@ if [ $BE -ne 0 ]; then
     # Check if premature kill
     pid=$(pgrep -u root -f clixon_backend)
     if [ -z "$pid" ]; then
-	err "backend already dead"
+	err1 "backend pid !=0" 0
     fi
     # kill backend
     stop_backend -f $cfg

test/test_perf_restconf.sh

@@ -32,6 +32,7 @@ ftest=$dir/test.xml
 fconfig=$dir/large.xml
 fconfig2=$dir/large2.xml # leaf-list
 foutput=$dir/output.xml
+foutput2=$dir/output2.xml
 
 cat <<EOF > $fyang
 module scaling{
@@ -132,15 +133,20 @@ expecteof "time -p $clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO<rpc $DEFAULTNS><co
 
 new "Check running-db contents"
 curl $CURLOPTS -X GET -H "Accept: application/yang-data+xml" $RCPROTO://localhost/restconf/data?content=config > $foutput
+r=$?
+if [ $r -ne 0 ]; then
+    err1 "retval 0" $r
+fi
 
 # Remove Content-Length line (depends on size)
-sed -i '/Content-Length:/d' $foutput
+# Note: do not use sed -i since it is not portable between gnu and bsd
-sed -i '/content-length:/d' $foutput
+sed '/Content-Length:/d' $foutput > $foutput2 && mv $foutput2 $foutput
+sed '/content-length:/d' $foutput > $foutput2 && mv $foutput2 $foutput
 # Remove (nginx) web-server specific lines
-sed -i '/Server:/d' $foutput
+sed '/Server:/d' $foutput > $foutput2 && mv $foutput2 $foutput
-sed -i '/Date:/d' $foutput
+sed '/Date:/d' $foutput > $foutput2 && mv $foutput2 $foutput
-sed -i '/Transfer-Encoding:/d' $foutput
+sed '/Transfer-Encoding:/d' $foutput > $foutput2 && mv $foutput2 $foutput
-sed -i '/Connection:/d' $foutput
+sed '/Connection:/d' $foutput > $foutput2 && mv $foutput2 $foutput
 
 # Create a file to compare with
 if ${HAVE_LIBNGHTTP2}; then
@@ -165,7 +171,7 @@ echo "</data>
" >> $ftest
 
 ret=$(diff -i $ftest $foutput)
 if [ $? -ne 0 ]; then
-    echo "$ret"
+    echo "diff -i $ftest $foutput"
     err1 "Matching running-db with $fconfigonly"
 fi