Update tests to explicit basic mode retrieval. RFC6243
This commit is contained in:
Jan-Olof Carlson
parent
8883d012c7
commit
979d5d9ca2
15 changed files with 117 additions and 47 deletions
|
|
@ -236,8 +236,11 @@ expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS>
|
|||
<mymod:mandatory-leaf>true</mymod:mandatory-leaf>
|
||||
</interface></interfaces></config></edit-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
||||
new "netconf verify get with refined ports (report-all)"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults></get-config></rpc>" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:mymod=\"urn:example:augment\"><name>e1</name><type>mymod:some-new-iftype</type><mymod:mandatory-leaf>true</mymod:mandatory-leaf><mymod:port>80</mymod:port><mymod:lport>8080</mymod:lport></interface></interfaces>" ""
|
||||
|
||||
new "netconf verify get with refined ports"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:mymod=\"urn:example:augment\"><name>e1</name><type>mymod:some-new-iftype</type><mymod:mandatory-leaf>true</mymod:mandatory-leaf><mymod:port>80</mymod:port><mymod:lport>8080</mymod:lport></interface></interfaces>" ""
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:mymod=\"urn:example:augment\"><name>e1</name><type>mymod:some-new-iftype</type><mymod:mandatory-leaf>true</mymod:mandatory-leaf></interface></interfaces>" ""
|
||||
|
||||
new "netconf set identity defined in other"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><edit-config><target><candidate/></target><config><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\">
|
||||
|
|
@ -264,8 +267,11 @@ new "netconf commit ok"
|
|||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><commit/></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
||||
# restconf and augment
|
||||
new "restconf get augment json (report-all)"
|
||||
expectpart "$(curl $CURLOPTS -X GET $RCPROTO://localhost/restconf/data/ietf-interfaces:interfaces?with-defaults=report-all)" 0 "HTTP/$HVER 200" '{"ietf-interfaces:interfaces":{"interface":\[{"name":"e1","type":"example-augment:some-new-iftype","example-augment:mandatory-leaf":"true","example-augment:port":80,"example-augment:lport":8080},{"name":"e2","type":"example-augment:some-new-iftype","example-augment:mandatory-leaf":"true","example-augment:other":"ietf-interfaces:fddi","example-augment:port":80,"example-augment:lport":8080},{"name":"e3","type":"example-augment:some-new-iftype","example-augment:mandatory-leaf":"true","example-augment:me":"you","example-augment:port":80,"example-augment:lport":8080}\]}}'
|
||||
|
||||
new "restconf get augment json"
|
||||
expectpart "$(curl $CURLOPTS -X GET $RCPROTO://localhost/restconf/data/ietf-interfaces:interfaces)" 0 "HTTP/$HVER 200" '{"ietf-interfaces:interfaces":{"interface":\[{"name":"e1","type":"example-augment:some-new-iftype","example-augment:mandatory-leaf":"true","example-augment:port":80,"example-augment:lport":8080},{"name":"e2","type":"example-augment:some-new-iftype","example-augment:mandatory-leaf":"true","example-augment:other":"ietf-interfaces:fddi","example-augment:port":80,"example-augment:lport":8080},{"name":"e3","type":"example-augment:some-new-iftype","example-augment:mandatory-leaf":"true","example-augment:me":"you","example-augment:port":80,"example-augment:lport":8080}\]}}'
|
||||
expectpart "$(curl $CURLOPTS -X GET $RCPROTO://localhost/restconf/data/ietf-interfaces:interfaces)" 0 "HTTP/$HVER 200" '{"ietf-interfaces:interfaces":{"interface":\[{"name":"e1","type":"example-augment:some-new-iftype","example-augment:mandatory-leaf":"true"},{"name":"e2","type":"example-augment:some-new-iftype","example-augment:mandatory-leaf":"true","example-augment:other":"ietf-interfaces:fddi"},{"name":"e3","type":"example-augment:some-new-iftype","example-augment:mandatory-leaf":"true","example-augment:me":"you"}\]}}'
|
||||
|
||||
new "restconf get augment xml"
|
||||
expectpart "$(curl $CURLOPTS -X GET -H 'Accept: application/yang-data+xml' $RCPROTO://localhost/restconf/data/ietf-interfaces:interfaces)" 0 "HTTP/$HVER 200" '<interfaces xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces">
|
||||
|
|
@ -291,14 +297,23 @@ EOF
|
|||
new "restconf POST augment multi-namespace path e2 (middle path)"
|
||||
expectpart "$(curl $CURLOPTS -X POST -H 'Content-Type: application/yang-data+xml' $RCPROTO://localhost/restconf/data/ietf-interfaces:interfaces/interface=e2 -d "$XML" )" 0 "HTTP/$HVER 201"
|
||||
|
||||
new "restconf GET augment multi-namespace top (report-all)"
|
||||
expectpart "$(curl $CURLOPTS -X GET $RCPROTO://localhost/restconf/data/ietf-interfaces:interfaces?with-defaults=report-all)" 0 "HTTP/$HVER 200" '{"ietf-interfaces:interfaces":{"interface":\[{"name":"e1","type":"example-augment:some-new-iftype","example-augment:ospf":{"reference-bandwidth":23},"example-augment:mandatory-leaf":"true","example-augment:port":80,"example-augment:lport":8080},{"name":"e2","type":"example-augment:some-new-iftype","example-augment:ospf":{"reference-bandwidth":23},"example-augment:mandatory-leaf":"true","example-augment:other":"ietf-interfaces:fddi","example-augment:port":80,"example-augment:lport":8080},{"name":"e3","type":"example-augment:some-new-iftype","example-augment:mandatory-leaf":"true","example-augment:me":"you","example-augment:port":80,"example-augment:lport":8080}\]}}'
|
||||
|
||||
new "restconf GET augment multi-namespace top"
|
||||
expectpart "$(curl $CURLOPTS -X GET $RCPROTO://localhost/restconf/data/ietf-interfaces:interfaces)" 0 "HTTP/$HVER 200" '{"ietf-interfaces:interfaces":{"interface":\[{"name":"e1","type":"example-augment:some-new-iftype","example-augment:ospf":{"reference-bandwidth":23},"example-augment:mandatory-leaf":"true","example-augment:port":80,"example-augment:lport":8080},{"name":"e2","type":"example-augment:some-new-iftype","example-augment:ospf":{"reference-bandwidth":23},"example-augment:mandatory-leaf":"true","example-augment:other":"ietf-interfaces:fddi","example-augment:port":80,"example-augment:lport":8080},{"name":"e3","type":"example-augment:some-new-iftype","example-augment:mandatory-leaf":"true","example-augment:me":"you","example-augment:port":80,"example-augment:lport":8080}\]}}'
|
||||
expectpart "$(curl $CURLOPTS -X GET $RCPROTO://localhost/restconf/data/ietf-interfaces:interfaces)" 0 "HTTP/$HVER 200" '{"ietf-interfaces:interfaces":{"interface":\[{"name":"e1","type":"example-augment:some-new-iftype","example-augment:ospf":{"reference-bandwidth":23},"example-augment:mandatory-leaf":"true"},{"name":"e2","type":"example-augment:some-new-iftype","example-augment:ospf":{"reference-bandwidth":23},"example-augment:mandatory-leaf":"true","example-augment:other":"ietf-interfaces:fddi"},{"name":"e3","type":"example-augment:some-new-iftype","example-augment:mandatory-leaf":"true","example-augment:me":"you"}\]}}'
|
||||
|
||||
new "restconf GET augment multi-namespace level 1 (report-all)"
|
||||
expectpart "$(curl $CURLOPTS -X GET $RCPROTO://localhost/restconf/data/ietf-interfaces:interfaces/interface=e1?with-defaults=report-all)" 0 "HTTP/$HVER 200" '{"ietf-interfaces:interface":\[{"name":"e1","type":"example-augment:some-new-iftype","example-augment:ospf":{"reference-bandwidth":23},"example-augment:mandatory-leaf":"true","example-augment:port":80,"example-augment:lport":8080}\]}'
|
||||
|
||||
new "restconf GET augment multi-namespace level 1"
|
||||
expectpart "$(curl $CURLOPTS -X GET $RCPROTO://localhost/restconf/data/ietf-interfaces:interfaces/interface=e1)" 0 "HTTP/$HVER 200" '{"ietf-interfaces:interface":\[{"name":"e1","type":"example-augment:some-new-iftype","example-augment:ospf":{"reference-bandwidth":23},"example-augment:mandatory-leaf":"true","example-augment:port":80,"example-augment:lport":8080}\]}'
|
||||
expectpart "$(curl $CURLOPTS -X GET $RCPROTO://localhost/restconf/data/ietf-interfaces:interfaces/interface=e1)" 0 "HTTP/$HVER 200" '{"ietf-interfaces:interface":\[{"name":"e1","type":"example-augment:some-new-iftype","example-augment:ospf":{"reference-bandwidth":23},"example-augment:mandatory-leaf":"true"}\]}'
|
||||
|
||||
new "restconf GET augment multi-namespace cross"
|
||||
expectpart "$(curl $CURLOPTS -X GET $RCPROTO://localhost/restconf/data/ietf-interfaces:interfaces/interface=e1/example-augment:ospf)" 0 "HTTP/$HVER 200" '{"example-augment:ospf":{"reference-bandwidth":23}}'
|
||||
expectpart "$(curl $CURLOPTS -X GET $RCPROTO://localhost/restconf/data/ietf-interfaces:interfaces/interface=e1/example-augment:ospf?with-defaults=report-all)" 0 "HTTP/$HVER 200" '{"example-augment:ospf":{"reference-bandwidth":23}}'
|
||||
|
||||
new "restconf GET augment multi-namespace cross level 2 (report-all)"
|
||||
expectpart "$(curl $CURLOPTS -X GET $RCPROTO://localhost/restconf/data/ietf-interfaces:interfaces/interface=e1/example-augment:ospf/reference-bandwidth?with-defaults=report-all)" 0 "HTTP/$HVER 200" '{"example-augment:reference-bandwidth":23}'
|
||||
|
||||
new "restconf GET augment multi-namespace cross level 2"
|
||||
expectpart "$(curl $CURLOPTS -X GET $RCPROTO://localhost/restconf/data/ietf-interfaces:interfaces/interface=e1/example-augment:ospf/reference-bandwidth)" 0 "HTTP/$HVER 200" '{"example-augment:reference-bandwidth":23}'
|
||||
|
|
|
|||
|
|
@ -89,19 +89,19 @@ new "wait backend"
|
|||
wait_backend
|
||||
|
||||
new "cli show config startup"
|
||||
expectpart "$($clixon_cli -1 -f $cfg -l o show config xml)" 0 '<table xmlns="urn:example:clixon">' '<map xmlns="urn:example:augment">' '<enable>true</enable>'
|
||||
expectpart "$($clixon_cli -1 -f $cfg -l o show config xml default report-all)" 0 '<table xmlns="urn:example:clixon">' '<map xmlns="urn:example:augment">' '<enable>true</enable>'
|
||||
|
||||
new "cli delete map name"
|
||||
expectpart "$($clixon_cli -1 -f $cfg -l o delete table map name me)" 0 ""
|
||||
|
||||
new "cli show config deleted"
|
||||
expectpart "$($clixon_cli -1 -f $cfg -l o show config xml)" 0 '<table xmlns="urn:example:clixon">' '<map xmlns="urn:example:augment">' '<enable>true</enable>'
|
||||
expectpart "$($clixon_cli -1 -f $cfg -l o show config xml default report-all)" 0 '<table xmlns="urn:example:clixon">' '<map xmlns="urn:example:augment">' '<enable>true</enable>'
|
||||
|
||||
new "cli set map name"
|
||||
expectpart "$($clixon_cli -1 -f $cfg -l o set table map name x)" 0 ""
|
||||
|
||||
new "cli show config set"
|
||||
expectpart "$($clixon_cli -1 -f $cfg -l o show config xml)" 0 '<table xmlns="urn:example:clixon">' '<map xmlns="urn:example:augment">' '<enable>true</enable>'
|
||||
expectpart "$($clixon_cli -1 -f $cfg -l o show config xml default report-all)" 0 '<table xmlns="urn:example:clixon">' '<map xmlns="urn:example:augment">' '<enable>true</enable>'
|
||||
|
||||
if [ $BE -ne 0 ]; then
|
||||
new "Kill backend"
|
||||
|
|
|
|||
|
|
@ -125,13 +125,13 @@ function testrun()
|
|||
|
||||
new "get config"
|
||||
if [ -z "$config" ]; then
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><running/></source></get-config></rpc>" "^<rpc-reply $DEFAULTNS><data/></rpc-reply>$"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><running/></source><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults></get-config></rpc>" "^<rpc-reply $DEFAULTNS><data/></rpc-reply>$"
|
||||
else
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><running/></source></get-config></rpc>" "^<rpc-reply $DEFAULTNS><data>$config</data></rpc-reply>$"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><running/></source><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults></get-config></rpc>" "^<rpc-reply $DEFAULTNS><data>$config</data></rpc-reply>$"
|
||||
fi
|
||||
|
||||
new "get state"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get/></rpc>" "^<rpc-reply $DEFAULTNS><data>$state</data></rpc-reply>$"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults></get></rpc>" "^<rpc-reply $DEFAULTNS><data>$state</data></rpc-reply>$"
|
||||
}
|
||||
|
||||
new "test params: -f $cfg"
|
||||
|
|
|
|||
|
|
@ -153,10 +153,10 @@ expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS>
|
|||
|
||||
# Here startup and candidate have content
|
||||
new "Check candidate content"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:if=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><name>eth/0/0</name><type>if:fddi</type><enabled>true</enabled></interface></interfaces></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:if=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><name>eth/0/0</name><type>if:fddi</type></interface></interfaces></data></rpc-reply>"
|
||||
|
||||
new "Check startup content"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><startup/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:if=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><name>eth/0/0</name><type>if:fddi</type><enabled>true</enabled></interface></interfaces></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><startup/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:if=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><name>eth/0/0</name><type>if:fddi</type></interface></interfaces></data></rpc-reply>"
|
||||
|
||||
new "Delete startup"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><delete-config><target><startup/></target></delete-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
|
@ -170,7 +170,7 @@ new "copy candidate->startup"
|
|||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><copy-config><target><startup/></target><source><candidate/></source></copy-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
||||
new "Check startup content xxx"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><startup/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:if=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><name>eth/0/0</name><type>if:fddi</type><enabled>true</enabled></interface></interfaces></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><startup/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:if=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><name>eth/0/0</name><type>if:fddi</type></interface></interfaces></data></rpc-reply>"
|
||||
|
||||
new "Delete candidate"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><edit-config><target><candidate/></target><config><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\" xmlns:nc=\"urn:ietf:params:xml:ns:netconf:base:1.0\"><interface nc:operation=\"delete\"><name>eth/0/0</name><type>if:fddi</type></interface></interfaces></config><default-operation>none</default-operation> </edit-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
|
@ -184,7 +184,7 @@ new "copy startup->candidate"
|
|||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><copy-config><target><candidate/></target><source><startup/></source></copy-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
||||
new "Check candidate content"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:if=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><name>eth/0/0</name><type>if:fddi</type><enabled>true</enabled></interface></interfaces></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:if=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><name>eth/0/0</name><type>if:fddi</type></interface></interfaces></data></rpc-reply>"
|
||||
|
||||
# Negative test: check copying to running is not allowed
|
||||
new "Delete candidate"
|
||||
|
|
|
|||
|
|
@ -136,7 +136,10 @@ new "wait backend"
|
|||
wait_backend
|
||||
|
||||
new "get config"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data>$XML</data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data/></rpc-reply>"
|
||||
|
||||
new "get config(report-all)"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data>$XML</data></rpc-reply>"
|
||||
|
||||
new "Change default value r1"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><edit-config><target><candidate/></target><config><r1 xmlns=\"urn:example:clixon\">99</r1></config></edit-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
|
@ -144,24 +147,36 @@ expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS>
|
|||
new "get config r1"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><filter type=\"xpath\" select=\"/ex:r1\" xmlns:ex=\"urn:example:clixon\" /></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><r1 xmlns=\"urn:example:clixon\">99</r1></data></rpc-reply>"
|
||||
|
||||
new "get config(report-all) r1"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults><source><candidate/></source><filter type=\"xpath\" select=\"/ex:r1\" xmlns:ex=\"urn:example:clixon\" /></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><r1 xmlns=\"urn:example:clixon\">99</r1></data></rpc-reply>"
|
||||
|
||||
new "Remove r1"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><edit-config><target><candidate/></target><config><r1 xmlns=\"urn:example:clixon\" nc:operation=\"delete\" xmlns:nc=\"urn:ietf:params:xml:ns:netconf:base:1.0\">99</r1></config></edit-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
||||
new "get config"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data>$XML</data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data/></rpc-reply>"
|
||||
|
||||
new "get config(report-all)"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data>$XML</data></rpc-reply>"
|
||||
|
||||
new "Set x list element"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><edit-config><target><candidate/></target><config><xs-config xmlns=\"urn:example:clixon\"><x><name>a</name></x></xs-config></config></edit-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
||||
new "get config (should contain y/inside+outside)"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data>$XML<xs-config xmlns=\"urn:example:clixon\"><x><name>a</name><y><inside>false</inside></y><outside>false</outside></x></xs-config></data></rpc-reply>"
|
||||
new "get config (should not contain y/inside+outside)"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><xs-config xmlns=\"urn:example:clixon\"><x><name>a</name></x></xs-config></data></rpc-reply>"
|
||||
|
||||
new "get config(report-all) (should contain y/inside+outside)"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data>$XML<xs-config xmlns=\"urn:example:clixon\"><x><name>a</name><y><inside>false</inside></y><outside>false</outside></x></xs-config></data></rpc-reply>"
|
||||
|
||||
# Set s3 leaf to 99 triggering when condition for default values
|
||||
new "Set s3 to 99"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><edit-config><target><candidate/></target><config><np3 xmlns=\"urn:example:clixon\"><s3>99</s3></np3></config></edit-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
||||
new "get config np3 with npleaf and npext"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><filter type=\"xpath\" select=\"/ex:np3\" xmlns:ex=\"urn:example:clixon\" /></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><np3 xmlns=\"urn:example:clixon\"><s3>99</s3><np31><s31>31</s31></np31><npleaf>98</npleaf><npcont><npext>99</npext></npcont></np3></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><filter type=\"xpath\" select=\"/ex:np3\" xmlns:ex=\"urn:example:clixon\" /></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><np3 xmlns=\"urn:example:clixon\"><s3>99</s3></np3></data></rpc-reply>"
|
||||
|
||||
new "get config(report-all) np3 with npleaf and npext"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults><source><candidate/></source><filter type=\"xpath\" select=\"/ex:np3\" xmlns:ex=\"urn:example:clixon\" /></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><np3 xmlns=\"urn:example:clixon\"><s3>99</s3><np31><s31>31</s31></np31><npleaf>98</npleaf><npcont><npext>99</npext></npcont></np3></data></rpc-reply>"
|
||||
|
||||
if [ $BE -ne 0 ]; then
|
||||
new "Kill backend"
|
||||
|
|
@ -198,7 +213,11 @@ wait_backend
|
|||
|
||||
new "get startup config"
|
||||
# Should have all defaults, except r1 that is set to 99
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data>$XML</data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data>$SXML</data></rpc-reply>"
|
||||
|
||||
new "get(report-all) startup config"
|
||||
# Should have all defaults, except r1 that is set to 99
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data>$XML</data></rpc-reply>"
|
||||
|
||||
# permission kludges
|
||||
sudo chmod 666 $dir/running_db
|
||||
|
|
@ -258,7 +277,10 @@ new "wait backend"
|
|||
wait_backend
|
||||
|
||||
new "get startup config with presence"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data>$XML</data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><p4 xmlns=\"urn:example:clixon\"/></data></rpc-reply>"
|
||||
|
||||
new "get(report-all) startup config with presence"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data>$XML</data></rpc-reply>"
|
||||
|
||||
if [ $BE -ne 0 ]; then
|
||||
new "Kill backend"
|
||||
|
|
@ -290,7 +312,10 @@ new "wait backend"
|
|||
wait_backend
|
||||
|
||||
new "get startup config with list default"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data>$XML<xs-config xmlns=\"urn:example:clixon\"><x><name>a</name><y><inside>false</inside></y><outside>false</outside></x></xs-config></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><xs-config xmlns=\"urn:example:clixon\"><x><name>a</name></x></xs-config></data></rpc-reply>"
|
||||
|
||||
new "get(report-all) startup config with list default"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data>$XML<xs-config xmlns=\"urn:example:clixon\"><x><name>a</name><y><inside>false</inside></y><outside>false</outside></x></xs-config></data></rpc-reply>"
|
||||
|
||||
if [ $BE -ne 0 ]; then
|
||||
new "Kill backend"
|
||||
|
|
|
|||
|
|
@ -112,7 +112,7 @@ EOF
|
|||
if $getp; then
|
||||
# default is read allowed so this should always succeed.
|
||||
new "get startup default ok"
|
||||
expecteof_netconf "$prefix$clixon_netconf -qf $cfg -U $pseudo" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data>$DEFAULT</data></rpc-reply>"
|
||||
expecteof_netconf "$prefix$clixon_netconf -qf $cfg -U $pseudo" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data>$DEFAULT</data></rpc-reply>"
|
||||
# This would normally not work except in recovery situations
|
||||
else
|
||||
new "get startup not ok"
|
||||
|
|
|
|||
|
|
@ -207,7 +207,7 @@ $DEFAULTHELLO$rpc
|
|||
EOF
|
||||
|
||||
new "Check eth/0/0 added using xpath"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "$rpc" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:ex=\"urn:example:clixon\"><name>eth/0/0</name><type>ex:eth</type><enabled>true</enabled></interface></interfaces></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "$rpc" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:ex=\"urn:example:clixon\"><name>eth/0/0</name><type>ex:eth</type></interface></interfaces></data></rpc-reply>"
|
||||
|
||||
new "Re-create same eth/0/0 which should generate error"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><edit-config><target><candidate/></target><config><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\" xmlns:nc=\"urn:ietf:params:xml:ns:netconf:base:1.0\"><interface nc:operation=\"create\"><name>eth/0/0</name><type>ex:eth</type></interface></interfaces></config><default-operation>none</default-operation> </edit-config></rpc>" "<rpc-reply $DEFAULTNS><rpc-error>" ""
|
||||
|
|
@ -241,7 +241,7 @@ expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "$rpc" "" "<rpc-r
|
|||
rpc="<rpc $DEFAULTNS><get-config><source><candidate/></source><filter type=\"xpath\" select=\"/if:interfaces/if:interface[if:name='eth1']/if:enabled/../..\" xmlns:if=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"/></get-config></rpc>"
|
||||
|
||||
new "netconf get config xpath parent"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "$rpc" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface><name>eth/0/0</name><enabled>true</enabled></interface><interface><name>eth1</name><enabled>true</enabled><ipv4 xmlns=\"urn:ietf:params:xml:ns:yang:ietf-ip\"><enabled>true</enabled><forwarding>false</forwarding><address><ip>9.2.3.4</ip><prefix-length>24</prefix-length></address></ipv4></interface></interfaces></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "$rpc" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface><name>eth/0/0</name></interface><interface><name>eth1</name><enabled>true</enabled><ipv4 xmlns=\"urn:ietf:params:xml:ns:yang:ietf-ip\"><address><ip>9.2.3.4</ip><prefix-length>24</prefix-length></address></ipv4></interface></interfaces></data></rpc-reply>"
|
||||
|
||||
new "netconf validate missing type"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><validate><source><candidate/></source></validate></rpc>" "<rpc-reply $DEFAULTNS><rpc-error>" ""
|
||||
|
|
@ -281,7 +281,10 @@ new "netconf edit ampersand encoding(<&): name:'eth&' type:'t<>'"
|
|||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><edit-config><target><candidate/></target><config><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface><name>eth&</name><type>t<></type></interface></interfaces></config></edit-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
||||
new "netconf get replaced config"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface><name>eth&</name><type>t<></type><enabled>true</enabled></interface><interface xmlns:ex=\"urn:example:clixon\"><name>eth1</name><type>ex:eth</type><enabled>true</enabled></interface><interface xmlns:ex=\"urn:example:clixon\"><name>eth2</name><type>ex:eth</type><enabled>true</enabled></interface></interfaces></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface><name>eth&</name><type>t<></type></interface><interface xmlns:ex=\"urn:example:clixon\"><name>eth1</name><type>ex:eth</type></interface><interface xmlns:ex=\"urn:example:clixon\"><name>eth2</name><type>ex:eth</type></interface></interfaces></data></rpc-reply>"
|
||||
|
||||
new "netconf get replaced config (report-all)"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface><name>eth&</name><type>t<></type><enabled>true</enabled></interface><interface xmlns:ex=\"urn:example:clixon\"><name>eth1</name><type>ex:eth</type><enabled>true</enabled></interface><interface xmlns:ex=\"urn:example:clixon\"><name>eth2</name><type>ex:eth</type><enabled>true</enabled></interface></interfaces></data></rpc-reply>"
|
||||
|
||||
new "cli show configuration eth& - encoding tests"
|
||||
expectpart "$($clixon_cli -1 -f $cfg show conf cli)" 0 "interfaces interface eth& type t<>
|
||||
|
|
@ -300,10 +303,10 @@ new "netconf edit state operation should fail"
|
|||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><edit-config><target><candidate/></target><config><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface><name>e0</name><oper-status>up</oper-status></interface></interfaces></config></edit-config></rpc>" "" "<rpc-reply $DEFAULTNS><rpc-error><error-type>application</error-type><error-tag>bad-element</error-tag><error-info><bad-element>oper-status</bad-element></error-info><error-severity>error</error-severity><error-message>module ietf-interfaces: state data node unexpected</error-message></rpc-error></rpc-reply>"
|
||||
|
||||
new "netconf get state operation"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get><filter type=\"xpath\" select=\"/if:interfaces\" xmlns:if=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\" /></get></rpc>" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:ex=\"urn:example:clixon\"><name>eth1</name><type>ex:eth</type><enabled>true</enabled><oper-status>up</oper-status><ex:my-status><ex:int>42</ex:int><ex:str>foo</ex:str></ex:my-status></interface></interfaces></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get><filter type=\"xpath\" select=\"/if:interfaces\" xmlns:if=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\" /></get></rpc>" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:ex=\"urn:example:clixon\"><name>eth1</name><type>ex:eth</type><oper-status>up</oper-status><ex:my-status><ex:int>42</ex:int><ex:str>foo</ex:str></ex:my-status></interface></interfaces></data></rpc-reply>"
|
||||
|
||||
new "netconf get state operation use prefix xx"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<xx:rpc xmlns:xx=\"urn:ietf:params:xml:ns:netconf:base:1.0\" xx:message-id=\"42\"><xx:get><xx:filter xx:type=\"xpath\" xx:select=\"/if:interfaces\" xmlns:if=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\" /></xx:get></xx:rpc>" "" "<rpc-reply xmlns=\"urn:ietf:params:xml:ns:netconf:base:1.0\" xmlns:xx=\"urn:ietf:params:xml:ns:netconf:base:1.0\" xx:message-id=\"42\"><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:ex=\"urn:example:clixon\"><name>eth1</name><type>ex:eth</type><enabled>true</enabled><oper-status>up</oper-status><ex:my-status><ex:int>42</ex:int><ex:str>foo</ex:str></ex:my-status></interface></interfaces></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<xx:rpc xmlns:xx=\"urn:ietf:params:xml:ns:netconf:base:1.0\" xx:message-id=\"42\"><xx:get><xx:filter xx:type=\"xpath\" xx:select=\"/if:interfaces\" xmlns:if=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\" /></xx:get></xx:rpc>" "" "<rpc-reply xmlns=\"urn:ietf:params:xml:ns:netconf:base:1.0\" xmlns:xx=\"urn:ietf:params:xml:ns:netconf:base:1.0\" xx:message-id=\"42\"><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:ex=\"urn:example:clixon\"><name>eth1</name><type>ex:eth</type><oper-status>up</oper-status><ex:my-status><ex:int>42</ex:int><ex:str>foo</ex:str></ex:my-status></interface></interfaces></data></rpc-reply>"
|
||||
|
||||
new "netconf lock"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><lock><target><candidate/></target></lock></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
|
@ -403,7 +406,7 @@ new "copy startup to candidate using prefix xx"
|
|||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<xx:rpc xmlns:xx=\"urn:ietf:params:xml:ns:netconf:base:1.0\" xx:message-id=\"42\"><xx:copy-config><xx:target><xx:startup/></xx:target><xx:source><xx:candidate/></xx:source></xx:copy-config></xx:rpc>" "" "<rpc-reply xmlns=\"urn:ietf:params:xml:ns:netconf:base:1.0\" xmlns:xx=\"urn:ietf:params:xml:ns:netconf:base:1.0\" xx:message-id=\"42\"><ok/></rpc-reply>"
|
||||
|
||||
new "netconf get startup"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><startup/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:ex=\"urn:example:clixon\"><name>eth1</name><type>ex:eth</type><enabled>true</enabled></interface></interfaces></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><startup/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:ietf:params:xml:ns:yang:ietf-interfaces\"><interface xmlns:ex=\"urn:example:clixon\"><name>eth1</name><type>ex:eth</type></interface></interfaces></data></rpc-reply>"
|
||||
|
||||
new "netconf delete startup"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><delete-config><target><startup/></target></delete-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
|
|
|||
|
|
@ -150,7 +150,7 @@ new "netconf get test single req"
|
|||
sel="/ex:interfaces/ex:a[ex:name='foo']/ex:b/ex:interface[ex:name='e1']"
|
||||
rpc=$(chunked_framing "<rpc $DEFAULTNS><get><filter type=\"xpath\" select=\"$sel\" xmlns:ex=\"urn:example:clixon\"/></get></rpc>")
|
||||
|
||||
expecteof_netconf "$clixon_netconf -qef $cfg" 0 "$DEFAULTHELLO" "$rpc" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:example:clixon\"><a><name>foo</name><b><interface><name>e1</name><type>ex:eth</type><enabled>true</enabled><status>up</status></interface></b></a></interfaces></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qef $cfg" 0 "$DEFAULTHELLO" "$rpc" "" "<rpc-reply $DEFAULTNS><data><interfaces xmlns=\"urn:example:clixon\"><a><name>foo</name><b><interface><name>e1</name><type>ex:eth</type><status>up</status></interface></b></a></interfaces></data></rpc-reply>"
|
||||
|
||||
new "netconf get $perfreq single reqs"
|
||||
{ time -p for (( i=0; i<$perfreq; i++ )); do
|
||||
|
|
@ -162,7 +162,7 @@ done | $clixon_netconf -qe1f $cfg > /dev/null; } 2>&1 | awk '/real/ {print $2}'
|
|||
|
||||
# RESTCONF get
|
||||
new "restconf get test single req"
|
||||
expectpart "$(curl $CURLOPTS -X GET $RCPROTO://localhost/restconf/data/example:interfaces/a=foo/b/interface=e1)" 0 "HTTP/$HVER 200" '{"example:interface":\[{"name":"e1","type":"ex:eth","enabled":true,"status":"up"}\]}'
|
||||
expectpart "$(curl $CURLOPTS -X GET $RCPROTO://localhost/restconf/data/example:interfaces/a=foo/b/interface=e1)" 0 "HTTP/$HVER 200" '{"example:interface":\[{"name":"e1","type":"ex:eth","status":"up"}\]}'
|
||||
|
||||
new "restconf get $perfreq single reqs"
|
||||
#curl $CURLOPTS -X GET $RCPROTO://localhost/restconf/data/ietf-interfaces:interfaces/interface=e67
|
||||
|
|
@ -178,7 +178,7 @@ edit interfaces a foo b interface e1
|
|||
show state xml
|
||||
EOF
|
||||
new "cli get test single req"
|
||||
expectpart "$($clixon_cli -F $fin -f $cfg)" 0 "<name>e1</name>" "<type>ex:eth</type>" "<enabled>true</enabled>" "<status>up</status>$"
|
||||
expectpart "$($clixon_cli -F $fin -f $cfg)" 0 "<name>e1</name>" "<type>ex:eth</type>" "<status>up</status>$"
|
||||
|
||||
new "cli get $perfreq single reqs"
|
||||
{ time -p for (( i=0; i<$perfreq; i++ )); do
|
||||
|
|
|
|||
|
|
@ -95,14 +95,20 @@ wait_backend
|
|||
new "Set local-definition"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><edit-config><target><candidate/></target><config><certificate xmlns=\"urn:example:clixon\"><local-definition/></certificate></config></edit-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
||||
new "Get config expected foo2 refined default value (report-all)"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><certificate xmlns=\"urn:example:clixon\"><local-definition><dummy1>foo2</dummy1></local-definition></certificate></data></rpc-reply>"
|
||||
|
||||
new "Get config expected foo2 refined default value"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><certificate xmlns=\"urn:example:clixon\"><local-definition><dummy1>foo2</dummy1></local-definition></certificate></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><certificate xmlns=\"urn:example:clixon\"><local-definition/></certificate></data></rpc-reply>"
|
||||
|
||||
new "Set keystore-reference"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><edit-config><target><candidate/></target><config><certificate xmlns=\"urn:example:clixon\"><keystore-reference/></certificate></config></edit-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
||||
new "Get config expected bar2 refined default value (report-all)"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><certificate xmlns=\"urn:example:clixon\"><keystore-reference><dummy2>bar2</dummy2></keystore-reference></certificate></data></rpc-reply>"
|
||||
|
||||
new "Get config expected bar2 refined default value"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><certificate xmlns=\"urn:example:clixon\"><keystore-reference><dummy2>bar2</dummy2></keystore-reference></certificate></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><certificate xmlns=\"urn:example:clixon\"><keystore-reference/></certificate></data></rpc-reply>"
|
||||
|
||||
if [ $BE -ne 0 ]; then
|
||||
new "Kill backend"
|
||||
|
|
|
|||
|
|
@ -357,7 +357,7 @@ if [ $pid1 -eq 0 ]; then err "Pid" 0; fi
|
|||
sleep $DEMSLEEP
|
||||
|
||||
new "Get restconf config 1"
|
||||
expectpart "$(curl $CURLOPTS -X GET -H 'Accept: application/yang-data+xml' $RCPROTO://localhost/restconf/data/clixon-restconf:restconf)" 0 "HTTP/$HVER 200" "<restconf xmlns=\"http://clicon.org/restconf\"><enable>true</enable><auth-type>none</auth-type><debug>$RESTCONFDBG</debug><log-destination>$LOGDST</log-destination><enable-core-dump>false</enable-core-dump><pretty>false</pretty><socket><namespace>default</namespace><address>0.0.0.0</address><port>80</port><ssl>false</ssl></socket></restconf>"
|
||||
expectpart "$(curl $CURLOPTS -X GET -H 'Accept: application/yang-data+xml' $RCPROTO://localhost/restconf/data/clixon-restconf:restconf?with-defaults=report-all)" 0 "HTTP/$HVER 200" "<restconf xmlns=\"http://clicon.org/restconf\"><enable>true</enable><auth-type>none</auth-type><debug>$RESTCONFDBG</debug><log-destination>$LOGDST</log-destination><enable-core-dump>false</enable-core-dump><pretty>false</pretty><socket><namespace>default</namespace><address>0.0.0.0</address><port>80</port><ssl>false</ssl></socket></restconf>"
|
||||
|
||||
# remove it
|
||||
new "Delete server"
|
||||
|
|
@ -452,7 +452,7 @@ if [ $pid1 -eq 0 ]; then err "Pid" 0; fi
|
|||
sleep $DEMSLEEP
|
||||
|
||||
new "Get restconf config"
|
||||
expectpart "$(curl $CURLOPTS -X GET -H 'Accept: application/yang-data+xml' $RCPROTO://localhost/restconf/data/clixon-restconf:restconf)" 0 "HTTP/$HVER 200" "<restconf xmlns=\"http://clicon.org/restconf\"><enable>true</enable><auth-type>none</auth-type><debug>$RESTCONFDBG</debug><log-destination>$LOGDST</log-destination><enable-core-dump>false</enable-core-dump><pretty>false</pretty><socket><namespace>default</namespace><address>0.0.0.0</address><port>80</port><ssl>false</ssl></socket><socket><namespace>default</namespace><address>$INVALIDADDR</address><port>8080</port><ssl>false</ssl></socket></restconf>"
|
||||
expectpart "$(curl $CURLOPTS -X GET -H 'Accept: application/yang-data+xml' $RCPROTO://localhost/restconf/data/clixon-restconf:restconf?with-defaults=report-all)" 0 "HTTP/$HVER 200" "<restconf xmlns=\"http://clicon.org/restconf\"><enable>true</enable><auth-type>none</auth-type><debug>$RESTCONFDBG</debug><log-destination>$LOGDST</log-destination><enable-core-dump>false</enable-core-dump><pretty>false</pretty><socket><namespace>default</namespace><address>0.0.0.0</address><port>80</port><ssl>false</ssl></socket><socket><namespace>default</namespace><address>$INVALIDADDR</address><port>8080</port><ssl>false</ssl></socket></restconf>"
|
||||
|
||||
if [ $BE -ne 0 ]; then
|
||||
new "Kill backend"
|
||||
|
|
|
|||
|
|
@ -92,7 +92,7 @@ TRIM='<c xmlns="urn:example:default"><x><k>default</k></x><x><k>notset</k></x><x
|
|||
# explicit: MUST consider any data node that is not explicitly set data to
|
||||
# be default data.
|
||||
# (SAME AS Input XML)
|
||||
EXPLICIT='<c xmlns="urn:example:default"><x><k>default</k><y>42</y></x><x><k>notset</k><y>42</y></x><x><k>other</k><y>99</y></x></c>'
|
||||
EXPLICIT='<c xmlns="urn:example:default"><x><k>default</k><y>42</y></x><x><k>notset</k></x><x><k>other</k><y>99</y></x></c>'
|
||||
|
||||
new "Set defaults"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><edit-config><target><candidate/></target><config>$XML</config></edit-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
|
|
|||
|
|
@ -113,8 +113,11 @@ if [ $? -ne 0 ]; then
|
|||
err "<${DATASTORE_TOP}>$XML</${DATASTORE_TOP}>" "$ret"
|
||||
fi
|
||||
|
||||
new "check running defaults (report-all)"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults><source><running/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><d0>88</d0><b><c>0</c><d1>foo</d1><d2>42</d2></b></a></data></rpc-reply>"
|
||||
|
||||
new "check running defaults"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><running/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><d0>88</d0><b><c>0</c><d1>foo</d1><d2>42</d2></b></a></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><running/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><b><c>0</c></b></a></data></rpc-reply>"
|
||||
|
||||
new "delete existing list element"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS xmlns:nc=\"urn:ietf:params:xml:ns:netconf:base:1.0\"><edit-config><target><candidate/></target><config><a xmlns=\"urn:example:default\"><b nc:operation=\"delete\"><c>0</c></b></a></config></edit-config></rpc>" "" "<rpc-reply $DEFAULTNS xmlns:nc=\"urn:ietf:params:xml:ns:netconf:base:1.0\"><ok/></rpc-reply>"
|
||||
|
|
@ -125,23 +128,41 @@ expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS
|
|||
new "set new list element"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><edit-config><target><candidate/></target><config><a xmlns=\"urn:example:default\"><b><c>17</c></b></a></config></edit-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
||||
new "get the list top (report-all)"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><d0>88</d0><b><c>17</c><d1>foo</d1><d2>42</d2></b></a></data></rpc-reply>"
|
||||
|
||||
new "get the list top"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><d0>88</d0><b><c>17</c><d1>foo</d1><d2>42</d2></b></a></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><b><c>17</c></b></a></data></rpc-reply>"
|
||||
|
||||
new "get the list xpath /a (report-all)"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults><source><candidate/></source><filter type='subtree'><a xmlns='urn:example:default'/></filter></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><d0>88</d0><b><c>17</c><d1>foo</d1><d2>42</d2></b></a></data></rpc-reply>"
|
||||
|
||||
new "get the list xpath /a"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><filter type='subtree'><a xmlns='urn:example:default'/></filter></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><d0>88</d0><b><c>17</c><d1>foo</d1><d2>42</d2></b></a></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><filter type='subtree'><a xmlns='urn:example:default'/></filter></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><b><c>17</c></b></a></data></rpc-reply>"
|
||||
|
||||
new "get the list xpath /a/b (report-all)"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults><source><candidate/></source><filter type='subtree'><a xmlns='urn:example:default'><b/></a></filter></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><b><c>17</c><d1>foo</d1><d2>42</d2></b></a></data></rpc-reply>"
|
||||
|
||||
new "get the list xpath /a/b"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><filter type='subtree'><a xmlns='urn:example:default'><b/></a></filter></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><b><c>17</c><d1>foo</d1><d2>42</d2></b></a></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><filter type='subtree'><a xmlns='urn:example:default'><b/></a></filter></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><b><c>17</c></b></a></data></rpc-reply>"
|
||||
|
||||
new "get the list xpath /a/b/c (report-all)"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults><source><candidate/></source><filter type='subtree'><a xmlns='urn:example:default'><b><c/></b></a></filter></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><b><c>17</c></b></a></data></rpc-reply>"
|
||||
|
||||
new "get the list xpath /a/b/c"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><filter type='subtree'><a xmlns='urn:example:default'><b><c/></b></a></filter></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><b><c>17</c></b></a></data></rpc-reply>"
|
||||
|
||||
new "get the list xpath /a/b/c=17 (report-all)"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults><source><candidate/></source><filter type='subtree'><a xmlns='urn:example:default'><b><c>17</c></b></a></filter></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><b><c>17</c><d1>foo</d1><d2>42</d2></b></a></data></rpc-reply>"
|
||||
|
||||
new "get the list xpath /a/b/c=17"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><filter type='subtree'><a xmlns='urn:example:default'><b><c>17</c></b></a></filter></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><b><c>17</c><d1>foo</d1><d2>42</d2></b></a></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><filter type='subtree'><a xmlns='urn:example:default'><b><c>17</c></b></a></filter></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><b><c>17</c></b></a></data></rpc-reply>"
|
||||
|
||||
new "get the list xpath /a/b/c=17/d1 (report-all)"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults><source><candidate/></source><filter type='subtree'><a xmlns='urn:example:default'><b><c>17</c><d1/></b></a></filter></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><b><c>17</c><d1>foo</d1></b></a></data></rpc-reply>"
|
||||
|
||||
new "get the list xpath /a/b/c=17/d1"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><filter type='subtree'><a xmlns='urn:example:default'><b><c>17</c><d1/></b></a></filter></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><b><c>17</c><d1>foo</d1></b></a></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><filter type='subtree'><a xmlns='urn:example:default'><b><c>17</c><d1/></b></a></filter></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><a xmlns=\"urn:example:default\"><b><c>17</c></b></a></data></rpc-reply>"
|
||||
|
||||
if [ $BE -ne 0 ]; then # Bring your own backend
|
||||
new "Kill backend"
|
||||
|
|
|
|||
|
|
@ -124,7 +124,7 @@ function testrun()
|
|||
|
||||
if $admindefault; then # add rule
|
||||
new "Get type admin expected"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><running/></source><filter type=\"xpath\" select=\"/base:system/base:user[base:name='bob']/base:type\" xmlns:base=\"urn:example:base\"/></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><system xmlns=\"urn:example:base\"><user><name>bob</name><type>admin</type></user></system></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults><source><running/></source><filter type=\"xpath\" select=\"/base:system/base:user[base:name='bob']/base:type\" xmlns:base=\"urn:example:base\"/></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><system xmlns=\"urn:example:base\"><user><name>bob</name><type>admin</type></user></system></data></rpc-reply>"
|
||||
else
|
||||
new "Get type none expected"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><running/></source><filter type=\"xpath\" select=\"/base:system/base:user[base:name='bob']/base:type\" xmlns:base=\"urn:example:base\"/></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data/></rpc-reply>"
|
||||
|
|
|
|||
|
|
@ -204,7 +204,7 @@ new "rfc6243 2.3.1. 'explicit' Basic Mode Retrieval"
|
|||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" \
|
||||
"<rpc $DEFAULTNS><get><filter type=\"subtree\"><wd $EXAMPLENS/></filter></get></rpc>" "" \
|
||||
"<rpc-reply $DEFAULTNS><data><wd $EXAMPLENS>\
|
||||
<wdc>1500</wdc><wdce>1500</wdce><wds>ok</wds>\
|
||||
<wdce>1500</wdce><wds>ok</wds>\
|
||||
</wd></data></rpc-reply>"
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -114,7 +114,7 @@ function testrun()
|
|||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><edit-config><target><candidate/></target><config><table xmlns=\"urn:example:clixon\"><parameter><name>kalle</name></parameter></table></config><default-operation>merge</default-operation></edit-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
||||
new "netconf get default value set"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><table xmlns=\"urn:example:clixon\"><parameter><name>kalle</name><value>foo</value></parameter></table></data></rpc-reply>"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><get-config><source><candidate/></source><with-defaults xmlns=\"urn:ietf:params:xml:ns:yang:ietf-netconf-with-defaults\">report-all</with-defaults></get-config></rpc>" "" "<rpc-reply $DEFAULTNS><data><table xmlns=\"urn:example:clixon\"><parameter><name>kalle</name><value>foo</value></parameter></table></data></rpc-reply>"
|
||||
|
||||
new "netconf set non-match value expect ok"
|
||||
expecteof_netconf "$clixon_netconf -qf $cfg" 0 "$DEFAULTHELLO" "<rpc $DEFAULTNS><edit-config><target><candidate/></target><config><table xmlns=\"urn:example:clixon\"><parameter><name>kalle</name><value>42</value></parameter></table></config><default-operation>merge</default-operation></edit-config></rpc>" "" "<rpc-reply $DEFAULTNS><ok/></rpc-reply>"
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue