* [Identityref inside augment statement](https://github.com/clicon/clixon/issues/77)

* Yang-stmt enhanced with "shortcut" to original module

CHANGELOG.md

@@ -34,6 +34,8 @@
 * Added libgen.h for baseline()
 	
 ### Corrected Bugs
+* [Identityref inside augment statement](https://github.com/clicon/clixon/issues/77)
+  * Yang-stmt enhanced with "shortcut" to original module
 * Yang augment created multiple augmented children (no side-effect)
 * XML prefixed attribute names were not copied into the datastore
 * [yang type range statement does not support multiple values](https://github.com/clicon/clixon/issues/59)

README.md

@@ -112,12 +112,11 @@ However, the following YANG syntax modules are not implemented:
 - min/max-elements
 - unique
 - action
+- refine
 
 Restrictions on Yang types are as follows:
-- The range statement for built-in integers does not support multiple values (RFC7950 9.2.4)
-- The length statement for built-in strings does not support multiple values (RFC7950 9.4.4)
 - Submodules cannot re-use a prefix in an import statement that is already used for another imported module in the module that the submodule belongs to. (see https://github.com/clicon/clixon/issues/60)
-- default values on leaf-lists are not supported (RFC7950 7.7.2)
+- Default values on leaf-lists are not supported (RFC7950 7.7.2)
 
 ## XML
 

lib/clixon/clixon_yang.h

@@ -198,6 +198,10 @@ struct yang_stmt{
     char              *ys_argument;  /* String / argument depending on keyword */   
     int                ys_flags;     /* Flags according to YANG_FLAG_* above */
     /*--------------here common for all -------*/
+    yang_stmt         *ys_module;   /* Shortcut to "my" module. Augmented
+				       nodes can belong to other 
+					modules than the ancestor module */
+
     char              *ys_extra;     /* For unknown */
     cg_var            *ys_cv;        /* cligen variable. See ys_populate()
 					Following stmts have cv:s:

lib/src/clixon_xml_map.c

@@ -316,6 +316,7 @@ validate_leafref(cxobj     *xt,
  * @retval     0     Validation failed
  * @retval    -1     Error
  * @see ys_populate_identity where the derived types are set
+ * @see yang_augment_node
  * @see RFC7950 Sec 9.10.2:
  */
 static int

lib/src/clixon_yang.c

@@ -773,6 +773,7 @@ ys_module_by_xml(yang_spec  *ysp,
  * @param[in] ys    Any yang statement in a yang tree
  * @retval    ymod  The top module or sub-module 
  * @see ys_spec
+ * @note For an augmented node, the original module is returned
  */
 yang_stmt *
 ys_module(yang_stmt *ys)
@@ -786,6 +787,10 @@ ys_module(yang_stmt *ys)
     while (ys != NULL &&
 	   ys->ys_keyword != Y_MODULE &&
 	   ys->ys_keyword != Y_SUBMODULE){
+	if (ys->ys_module){ /* shortcut due to augment */
+	    ys = ys->ys_module;
+	    break;
+	}
 	yn = ys->ys_parent;
 	/* Some extra stuff to ensure ys is a stmt */
 	if (yn && yn->yn_keyword == Y_SPEC)
@@ -800,6 +805,7 @@ ys_module(yang_stmt *ys)
  * @param[in] ys    Any yang statement in a yang tree
  * @retval    yspec The top yang specification
  * @see  ys_module
+ * @see  ys_yang_augment_node where shortcut is set
  */
 yang_spec *
 ys_spec(yang_stmt *ys)
@@ -1640,7 +1646,12 @@ yang_augment_node(yang_stmt *ys,
     yang_stmt *ytarget = NULL;
     yang_stmt *yc;
     int        i;
-    
+    yang_stmt *ymod;
+
+    if ((ymod = ys_module(ys)) == NULL){
+	clicon_err(OE_YANG, 0, "My yang module not found");
+	goto done;
+    }
     schema_nodeid = ys->ys_argument;
     clicon_debug(2, "%s %s", __FUNCTION__, schema_nodeid);
     /* Find the target */
@@ -1654,7 +1665,7 @@ yang_augment_node(yang_stmt *ys,
     for (i=0; i<ys->ys_len; i++){
 	if ((yc = ys_dup(ys->ys_stmt[i])) == NULL)
 	    goto done;
-	/* XXX: use prefix of origin */
+	yc->ys_module = ymod;
 	if (yn_insert((yang_node*)ytarget, yc) < 0)
 	    goto done;
     }

lib/src/clixon_yang_type.c

@@ -772,7 +772,7 @@ ys_typedef_up(yang_stmt *ys)
    identityref's base identity. 
    1. (base) identity must exist (be found). This is a sanity check
      of the specification and also necessary for identity statements.
-   (This is what is dine here)
+   (This is what is done here)
    2. Check if a given node has value derived from base identity. This is
       a run-time check necessary when validating eg netconf.
    (This is validation)

test/test_augment.sh

@@ -6,7 +6,6 @@
 # both defined in the basic ietf-interfaces module (type) as well as the main
 # module through the augmented module ()
 # The ietf-interfaces is very restricted (not original).
-# Work-in-progress
 
 # Magic line must be first in script (see README.md)
 s="$_" ; . ./lib.sh || if [ "$s" = $0 ]; then exit 0; else return 0; fi
@@ -36,6 +35,8 @@ cat <<EOF > $cfg
 EOF
 
 # Stub ietf-interfaces for test
+# This is the target module (where the augment is applied to)
+# The grouping is from rfc7950 Sec 7.12 with simplified types
 cat <<EOF > $fyang2
 module ietf-interfaces {
   yang-version 1.1;
@@ -47,9 +48,6 @@ module ietf-interfaces {
       "Base identity from which specific interface types are
        derived.";
   }
-  identity eth {
-     base interface-type;
-  }
   identity fddi {
      base interface-type;
   }
@@ -68,11 +66,21 @@ module ietf-interfaces {
       }
     }
   }
+  grouping endpoint {
+       description "A reusable endpoint group.";
+       leaf mip {
+         type string;
+       }
+       leaf mport {
+         type uint16;
+       }
+  }
 }
 EOF
 
 # From rfc7950 sec 7.17
 # Note "when" is not present
+# This is the main module where the augment exists
 cat <<EOF > $fyang
 module example-augment {
        yang-version 1.1;
@@ -85,12 +93,47 @@ module example-augment {
        identity some-new-iftype {
           base if:interface-type;
        }
+       identity my-type {
+          description "an identity based in the main module";
+       }
+       identity you {
+          base my-type;
+       }
+       grouping mypoint {
+         description "A reusable endpoint group.";
+         leaf ip {
+           type string;
+         }
+         leaf port {
+           type uint16;
+         }
+       }
        augment "/if:interfaces/if:interface" {
 /*       when 'derived-from-or-self(if:type, "mymod:some-new-iftype")'; */
           leaf mandatory-leaf {
              mandatory true;
              type string;
           }
+          leaf me {
+              type identityref {
+                    base mymod:my-type;
+              }
+          }
+          leaf other {
+              type identityref {
+                    base if:interface-type;
+              }
+          }
+          uses if:endpoint {
+            refine port {
+              default 80;
+            }
+          }
+          uses mypoint {
+            refine mport {
+              default 8080;
+            }
+          }
        }
 }
 EOF
@@ -113,14 +156,45 @@ fi
 # mandatory-leaf See RFC7950 Sec 7.17
 # Error1: the xml should have xmlns for "mymod"
 #                XMLNS_YANG_ONLY must be undeffed
-new "netconf set new if my w augmented type"
-expecteof "$clixon_netconf -qf $cfg -y $fyang" 0 '<rpc><edit-config><target><candidate/></target><config><interfaces xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces"><interface xmlns:mymod="urn:example:augment"><name>my</name><type>mymod:some-new-iftype</type><mymod:mandatory-leaf>true</mymod:mandatory-leaf></interface></interfaces></config></edit-config></rpc>]]>]]>' "^<rpc-reply><ok/></rpc-reply>]]>]]>$"
+new "netconf set interface with augmented type and mandatory leaf"
+expecteof "$clixon_netconf -qf $cfg -y $fyang" 0 '<rpc><edit-config><target><candidate/></target><config><interfaces xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces">
+  <interface xmlns:mymod="urn:example:augment">
+    <name>e1</name>
+    <type>mymod:some-new-iftype</type>
+    <mymod:mandatory-leaf>true</mymod:mandatory-leaf>
+  </interface></interfaces></config></edit-config></rpc>]]>]]>' "^<rpc-reply><ok/></rpc-reply>]]>]]>$"
+
+new "netconf validate ok"
+expecteof "$clixon_netconf -qf $cfg -y $fyang" 0 "<rpc><validate><source><candidate/></source></validate></rpc>]]>]]>" '^<rpc-reply><ok/></rpc-reply>]]>]]>$'
+
+new "netconf set identity defined in other"
+expecteof "$clixon_netconf -qf $cfg -y $fyang" 0 '<rpc><edit-config><target><candidate/></target><config><interfaces xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces">
+  <interface xmlns:mymod="urn:example:augment">
+    <name>e2</name>
+    <type>fddi</type>
+    <mymod:mandatory-leaf>true</mymod:mandatory-leaf>
+    <other>if:fddi</other>
+  </interface></interfaces></config></edit-config></rpc>]]>]]>' "^<rpc-reply><ok/></rpc-reply>]]>]]>$"
+
+new "netconf validate ok"
+expecteof "$clixon_netconf -qf $cfg -y $fyang" 0 "<rpc><validate><source><candidate/></source></validate></rpc>]]>]]>" '^<rpc-reply><ok/></rpc-reply>]]>]]>$'
+
+new "netconf set identity defined in main"
+expecteof "$clixon_netconf -qf $cfg -y $fyang" 0 '<rpc><edit-config><target><candidate/></target><config><interfaces xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces">
+<interface xmlns:mymod="urn:example:augment">
+   <name>e3</name>
+   <type>fddi</type>
+   <mymod:mandatory-leaf>true</mymod:mandatory-leaf>
+   <me>mymod:you</me>
+ </interface></interfaces></config></edit-config></rpc>]]>]]>' "^<rpc-reply><ok/></rpc-reply>]]>]]>$"
 
 new "netconf validate ok"
 expecteof "$clixon_netconf -qf $cfg -y $fyang" 0 "<rpc><validate><source><candidate/></source></validate></rpc>]]>]]>" '^<rpc-reply><ok/></rpc-reply>]]>]]>$'
 
 expecteof "$clixon_netconf -qf $cfg -y $fyang" 0 "<rpc><discard-changes/></rpc>]]>]]>" "^<rpc-reply><ok/></rpc-reply>]]>]]>$"
 
+exit
+
 if [ $BE -eq 0 ]; then
     exit # BE
 fi
@@ -135,6 +209,4 @@ fi
 stop_backend -f $cfg
 sudo pkill -u root -f clixon_backend
 
-
-
 rm -rf $dir